Академический Документы
Профессиональный Документы
Культура Документы
Department of Education
Region XII
Division of South Cotabato
T’boli West III District
LAMSALOME INTEGRATED SCHOOL
______1. Which tool is used for hardware to stand on to prevent static electricity from building up?
a. Anti-static mat c. Philips head screwdriver
b. Hex driver d. Wire cutter
______2. Which tool is used to loosen or tighten cross-head screws?
a. Anti-static mat c. Philips head screwdriver b. Hex driver d.
Wire cutter
______3. Which tool is sometimes called a nut driver? It is used to tighten nuts in the same way that a
screwdriver tightens screws?
a. Anti-static mat c. Philips head screwdriver
b. Hex driver d. Wire cutter
______4. Which tool is used to strip and cut wires?
a. Anti-static mat c. Philips head screwdriver b. Hex driver d.
Wire cutter
______5. Which tool is used to retrieve parts from location that are too small for your hand to
fit?
a. Part Retriever c. Cable ties
b. Lint-free Cloth d. Flat head screwdriver
______6. Which tool is used to clean different computer components without scratching or leaving debris?
a. Part Retriever c. Cable ties
b. Lint-free Cloth d. Flat head screwdriver
______7. Which tool is used to bundle cables neatly inside and outside of a computer?
a. Part Retriever c. Cable ties
b. Lint-free Cloth d. Flat head screwdriver
______8. Which tool is used to loosen or tighten slotted screws?
a. Part Retriever c. Cable ties
b. Lint-free Cloth d. Flat head screwdriver
______9. Which tool is used to loosen or tighten screws that have a star-like depression on the top, a feature
that is mainly found on laptop?
a. Anti-static mat c. Philips head screwdriver b. Torx
screwdriver d. Wire cutter
______10. Which tool is used to blow away dust and debris from different computer parts
without touching the components?
a. Anti-static mat c. Compressed air
b. Hex driver d. Wire cutter
______11. Handheld device that aids in accomplishing a task.
a. Tool c. Tract
b. Equipment d. Weapons
______12. Leo a newbie computer technician, wants to disassemble a computer system. He should ____
a. Obtain the tool needed for the work.
b. Begin the work even without a tool.
c. Select the best tool for the job.
d. Improvise tools for the job.
______13. If a person does not know how to use a certain tool. What must he do?
a. Consult the encyclopedia.
b. Ask anybody about the tool.
c. Use the tool even without knowing its correct usage.
d. Read carefully the manual of the tool.
______14. Environmental Safety and Health Program requires the following, EXCEPT:
a. All tools be kept in good condition with regular maintenance
b. Tools should be reused even without regular maintenance.
c. The right protective equipment for the tool and activity be used
d. The right tool be used for the job