Вы находитесь на странице: 1из 3

1.

Please explain how the coordinate of stabilizer 1101, pump 1501 and pump 1502 are
indicated. (Provide picture for clarification)

Figure below shows coordinate for stabilizer 1101, pump 1501 and pump 1502. In this case,
W stands for negative coordinate for x-axis while N stands for positive coordinate for y-axis.
The coordinate for stabilizer 1101 is W316640 and N299850. Since W indicate for negative
coordinate and N is for positive coordinate, the real coordinate for stabilizer should be
(-316640, 299850). The steps are repeated for pump 1501 and pump 1502 which the
coordinate for W will have negative sign and positive sign for coordinate N. So, the first
coordinate for pump 1501 is (-314490, 303145) and the second one is (-312680, 303145)
while for the first coordinate for pump 1502 is (-309510, 303280) and for second coordinate
is (-307210, 303280).
Please explain the purpose/advantage of using layer and block for this project.

Layering system is important drawing management in AutoCAD. The purpose of layer in this
project is to control visibility and properties. It gives you a better control to plot your drawing since
when you draw an object on particular layer because it will have the same line weight, colour, line
type and other properties.

Next, in AutoCAD, a block is a collection of objects that are combined into a single named object.
The advantage of block in this project is reusable content. You can define a block. Then, it can be
used repeatedly without redraw it in new drawings or in the same drawing.

Вам также может понравиться