Академический Документы
Профессиональный Документы
Культура Документы
Introduction
Solutions Overview. . . . . . . . . . . . . . . . . . . . . 2
Summary of Code Requirements. . . . . . . . . . 4
Daylight Zone Requirements. . . . . . . . . . . . . . 5
Suggested Code Compliant Solutions . . . . . . 6
How to Use this Guide. . . . . . . . . . . . . . . . . . 8
Vive Local Solutions | Layout . . . . . . . . . . . . 10
Applications
Atrium
New Construction (Dimming 0–10 V). . . . . . . 12
Break Room
New Construction (Dimming 0–10 V). . . . . . . 14
Classroom
New Construction (Dimming 0–10 V). . . . . . . 16
Recommended (Fixture Control). . . . . . . . . . 18
Conference Room
New Construction (Dimming 0–10 V). . . . . . . 20
Recommended (Fixture Control). . . . . . . . . . 22
Egress Corridor
New Construction (Dimming 0–10 V). . . . . . . 24
Open Office
New Construction (Dimming 0–10 V). . . . . . . 26 This document summarizes the lighting
Recommended (Fixture Control). . . . . . . . . . 28 and receptacle control requirements for
commercial buildings. It is for information
purposes only. It is not meant to replace your
Private Office state’s or local jurisdiction’s official energy
New Construction (Dimming 0–10 V). . . . . . . 30 code. Please refer to your local building energy
code or authority having jurisdiction for your
Restroom (Multi-Stall) precise requirements. Only the authority having
jurisdiction can guarantee code compliance.
New Construction (Dimming 0–10 V). . . . . . . 32
Egress Stairwell
New Construction (Fixture Control). . . . . . . . 34
Recommended (Fixture Control). . . . . . . . . . 36
Solutions Overview
IECC 2018
Energy-saving lighting control strategies Codes can sometimes be complicated and difficult to navigate. This commercial application guide provides
examples of how Lutron products can be used to meet or exceed code requirements. This guide focuses
on Vive and Vive compatible solutions, but our other control systems offer similar features.
Multi-level
Heating Cooling
air conditioning systems through a contact closure.* response
BACnet
integration
* For the latest information on products compatible with the Vive wireless hub go to lutron.com/vive.
** Requires QS timeclock.
†
Automated Demand Response capability requires signal from a third-party device.
2 3
Summary of Requirements for Lighting and Receptacle Controls Daylight Zone Requirements
IECC 2018 IECC 2018
Switch manual device for control of the lighting within a space. See code for spaces C405.2.5
exist, based on space type, window area, neighboring
that allow remote location of control.
obstructions, and glass transmittance.
Lighting shall be capable of being reduced by at least 50% of maximum
Section View
Dimmer or lighting power. There shall be at least one manual control device for light
scene control reduction within a space. See code for spaces that allow remote location of
C405.2.2.2 Sidelighting (Window) NOT TO SCALE
DAYLIGHT ZONE
Occupancy Automatic control turns lighting ON upon occupancy or OFF after a vacancy WINDOW
C405.2.1
sensor of 20 minutes or less. HEAD AVERAGE
HEIGHT (HW) CEILING
When initiated by a timeclock or occupancy sensor, lighting is automatically C405.2.1.1 HEIGHT (HC)
Full ON Section View Plan View Section View
turned ON to maximum lighting power. Exception NOT TO SCALE NOT TO SCALE NOT TO SCALE
Manual ON Lighting is turned ON manually by an occupant. C405.2.1.1 Section View Section View
NOT TO SCALE
Toplighting
2 ft (Skylight) 2 ft
NOT TO SCALE
Demand response Demand response is not required by this energy code. N/A
For areas being used as a path of egress or fixtures being used for emergency, verify compliance with your local authority having jurisdiction.
2 ft 2 ft
Acceptance (functional) testing is required for all new construction applications to ensure that control hardware and software are calibrated, 0.7 x HC
programmed and functioning properly (Code provision C408.3).
1.0 x HW
Enhanced Digital Lighting Controls is one compliance path of the Additional Efficiency Package requirement (Section C406).
DAYLIGHT
1 Luminaire level lighting controls (LLLC) can be can be used as an alternate compliance ZONE
path. See Section C405.2 for more information.
4 SKYLIGHT ZONE 5
Suggested Code Compliant Solutions Suggested Code Compliant Solutions
IECC 2018 IECC 2018
The compliant solutions listed below are suggested based on total installed cost, simplicity of design, and Diagram key:
basic functional needs for the space. These solutions represent one of multiple compliant options to meet = Lighting retrofit
1 = New construction and retrofit1
= New construction
lighting and receptacle control requirements. ASHRAE 90.1 2016 can also be used as a compliance option
in meeting IECC 2018 requirements. Applications in this guide will illustrate these solutions and/or alternate
solutions for advanced functionality.
Classroom,
Lecture Hall, Conference, Open Office Parking Private Office Storage Facade/ Other
Atrium Training Room Break Room Corridor2 Guestroom3 Lobby (>300 sq. ft.) Garage4 (<300 sq. ft) Restroom Stairwell2 Room Landscape Exterior5
Switch
Control
Manual
Dimmer or
scene control
Timeclock
Occupancy 6
sensor
Automatic ON/OFF Control
Full ON
Partial ON
Settings
Manual ON
Full OFF
7 7
Partial OFF
Daylight responsive 8 8 8 8
control
Other
Receptacle control 9
Demand response
1 All retrofits altering more than 10% of the luminaires, or retrofits that increase the installed lighting power must comply with all new construction 5 Astronomical timeclock shall ensure all lights are off during daylight hours. Lights should be scheduled to Partial OFF during night hours.
requirements. See section C405.2.6.3 for scheduling times.
2 To comply with some life safety code requirements for egress illumination, automatic full OFF is not suggested. For non-egress areas, the occupancy 6 Control zone is limited to 600 sq. ft. Sensor must automatically reduce lighting in each control zone individually by at least 80%, or turn all
sensor should turn the lights to full OFF and a switching control may be used. lighting OFF, within 20 minutes of vacancy.
3 Automatic shutoff is required for all installed luminaires and switched receptacles. 7 Not a code requirement. Lutron recommends this solution for spaces designated as a path of egress.
4 Timeclock ensures the lights are on when typically occupied. Occupancy sensor controls lights 8 These spaces require continuous daylight dimming to OFF.
when typically unoccupied.
6 7
How to Use this Guide
IECC 2018
Occupant Enters:
for each space. Lights do not automatically turn on when an
occupant enters the space; lights must be turned Manual On Auto Off
light levels for both general and white-board lights. Personal Dimming
Radio Powr Savr wireless corner-mount
products for each application. LRF2-VKLB-P-WH
vacancy sensor
1 $ 85.00
Occupant Exits: 85%
All lights automatically turn off 15 minutes Max: 100% Max: 85%
PJ2-3BRL-GWH-L01 Pico wireless 2-button control 2 $ 21.00 after all occupants exit. High-end Trim/Tuning
PICO-WBX-ADAPT Pico wallbox adapter 2 $ 8.00 Add a Vive wireless hub to enable simple setup
and rezoning, system monitoring, timeclock
functionality, and advanced integration.
16 17
8 9
Vive Local Solutions Layout
IECC 2018
PowPak module
Occupancy sensor
Pico wireless remote control
Daylight sensor
10 11
Atrium | New Construction Atrium | New Construction
IECC 2018 IECC 2018
DZ 1 Low-voltage
wiring
Clear Connect
RF Communication
DZ 1
DZ 1 & DZ 2 =
Daylight Zones
DZ 1
Pico wireless Radio Powr Savr wireless
4-button daylight sensor
scene control
DZ 1
85%
Symbol Model Number Description Qty List Price Each Manual: Occupant selects scenes or uses dimmers
to set desired light levels for all lights. Entry scene Max: 100% Max: 85%
RMJS-8T-DV-B PowPak dimming module with 0-10 V 4 $ 150.00 controller has 3 user preferred presets and 1 all High-end Trim/Tuning
off button.
LRF2-DCRB-WH Radio Powr Savr wireless daylight sensor 2 $ 120.00 Timeclock: 7am: Dim 7pm: Off
Scene 1 Scene 2
PICO-WBX-ADAPT Pico wallbox adapter 1 $ 8.00 Timeclock turns lights off during normally Scene Control
unoccupied hours.
Consult your local rep
HJS-1-FM Vive wireless hub Shared for hub pricing and
service options.
12 13
Break Room | New Construction Break Room | New Construction
IECC 2018 IECC 2018
Low-voltage
wiring
Clear Connect
RF Communication
85%
Symbol Model Number Description Qty List Price Each When Occupied:
Manual: Occupant uses wall dimmer Max: 100% Max: 85%
RMJS-8T-DV-B PowPak dimming module with 0-10 V 1 $ 150.00 to set desired light levels for all lights. High-end Trim/Tuning
Occupant Exits:
Radio Powr Savr wireless corner-mount
LRF2-VKLB-P-WH 1 $ 85.00 All lights automatically turn off 15 minutes
vacancy sensor
after all occupants exit.
PJ2-3BRL-GWH-L01 Pico wireless 3-button with raise/lower control 1 $ 21.00
Add a Vive wireless hub to enable simple setup
and rezoning, system monitoring, timeclock
PICO-WBX-ADAPT Pico wallbox adapter 1 $ 8.00
functionality, and advanced integration.
Code Notes: For break rooms with daylight, include a 0-10 V dimming module per zone and a daylight sensor.
Want to add a Vive wireless hub for more features? Go to lutron.com/vive for complete compatibility and design details.
This solution requires 0-10 V enabled ballasts and drivers by others.
45%
* Go to lutron.com/references for more information.
14 15
Classroom | New Construction Classroom | New Construction
IECC 2018 IECC 2018
Low-voltage
DZ 1 DZ 1 DZ 1 wiring
2 2 2
Clear Connect
RF Communication
1
DZ 1 =
Daylight Zone
1 2 2 2
Pico wireless control Radio Powr Savr
wireless corner-mount
1 vacancy sensor and
daylight sensor
1 2
Occupant Enters:
Lights do not automatically turn on when an
occupant enters the space; lights must be turned Manual On Auto Off
Symbol Model Number Description Qty List Price Each When Occupied:
Automatic: Overhead lights dim/brighten based Full On Dim
RMJS-8T-DV-B PowPak dimming module with 0-10 V 3 $ 150.00 on daylight availability. There is one perimeter Daylight Harvesting
daylight zone.
LRF2-DCRB-WH Radio Powr Savr wireless daylight sensor 1 $ 120.00 Manual: Occupant uses wall dimmers to set desired Full On Dim
light levels for both general and white-board lights. Personal Dimming
Radio Powr Savr wireless corner-mount
LRF2-VKLB-P-WH 1 $ 85.00
vacancy sensor Occupant Exits: 85%
All lights automatically turn off 15 minutes Max: 100% Max: 85%
PJ2-3BRL-GWH-L01 Pico wireless 2-button control 2 $ 21.00 after all occupants exit. High-end Trim/Tuning
PICO-WBX-ADAPT Pico wallbox adapter 2 $ 8.00 Add a Vive wireless hub to enable simple setup
and rezoning, system monitoring, timeclock
functionality, and advanced integration.
Code Notes: For non-daylight classrooms, all general lighting can be connected to a single 0-10 V dimming module.
Want to add a Vive wireless hub for more features? Go to lutron.com/vive for complete compatibility and design details.
This solution requires 0-10 V enabled ballasts and drivers by others.
60%
* Go to lutron.com/references for more information.
16 17
Classroom | Recommended Classroom | Recommended
IECC 2018 IECC 2018
Clear Connect
RF Communication
2 2 2
1 2 2 2
Pico wireless control Pico wireless Integral fixture
4-button control with
1 scene control sensor
1 2
Occupant Enters:
All lights automatically turn on to 50% light level.
Occupant turns on lights to maximum level Partial On Auto Off
Symbol Model Number Description Qty List Price Each When Occupied:
Automatic: Overhead lights dim/brighten based Full On Dim
Integral to fixture1 Integral fixture control with sensor 12 $ 70.002 on daylight availability. There are two perimeter Daylight Harvesting
daylight zones.
PJ2-4B-GWH-L31 Pico wireless 4-button scene control 1 $ 39.00 Manual: Occupant selects scenes or uses Full On Dim
dimmers to set desired light levels for all lights. Personal Dimming
PJ2-3BRL-GWH-L01 Pico wireless 3-button with raise/lower control 2 $ 21.00
Entry scene controller has 3 user preferred
presets and 1 all off button. 85%
Go to lutron.com/findafixture for a complete list of compatible fixtures and drivers. Scene 1 Scene 2
2 Fixture adder for the control module may vary. Add a Vive wireless hub to enable simple setup Scene Control
and rezoning, system monitoring, timeclock
functionality, and advanced integration.
Want to add a Vive wireless hub for more features? Go to lutron.com/vive for complete compatibility and design details.
This solution requires digitally enabled ballasts and drivers by others.
This solution meets the requirements of the Luminaire Level Lighting Controls (LLLC) prescriptive path specified in section C405.2.2.
This solution meets the requirements of the Enhanced Digital Lighting Controls Additional Efficiency Package (Section C406).
65%
* Go to lutron.com/references for more information.
18 19
Conference Room | New Construction Conference Room | New Construction
IECC 2018 IECC 2018
Low-voltage
wiring
DZ 1 DZ 1 DZ 1
Clear Connect
RF Communication
DZ 1 & DZ 2 =
Daylight Zones
Symbol Model Number Description Qty List Price Each When Occupied:
Automatic: Overhead lights dim/brighten based Full On Dim
RMJS-8T-DV-B PowPak dimming module with 0-10V 2 $ 150.00 on daylight availability. There are two perimeter Daylight Harvesting
daylight zones.
LRF2-DCRB-WH Radio Powr Savr wireless daylight sensor 1 $ 120.00 Manual: Occupant uses wall dimmer to set Full On Dim
All lights automatically turn off 15 minutes Max: 100% Max: 85%
PJ2-3BRL-GWH-L01 Pico wireless 2-button control 2 $ 21.00 after all occupants exit. High-end Trim/Tuning
PICO-WBX-ADAPT Pico wallbox adapter 2 $ 8.00 Add a Vive wireless hub to enable simple setup
and rezoning, system monitoring, timeclock
functionality, and advanced integration.
Code Notes: For non-daylight conference rooms, the lighting can be connected to a single 0-10 V dimming module.
Want to add a Vive wireless hub for more features? Go to lutron.com/vive for complete compatibility and design details.
This solution requires 0-10 V enabled ballasts and drivers by others.
60%
* Go to lutron.com/references for more information.
20 21
Conference Room | Recommended Conference Room | Recommended
IECC 2018 IECC 2018
Clear Connect
DZ 1 DZ 1 DZ 1 RF Communication
DZ 1 & DZ 2 =
Daylight Zones
DZ 2
Symbol Model Number Description Qty List Price Each When Occupied:
Automatic: Overhead lights dim/brighten based Full On Dim
EcoSystem-enabled Hi-Lume Soft-on, on daylight availability. There are two perimeter Daylight Harvesting
Multiple 10 $ 67.00 - $ 81.00
Fade-to-Black series ballasts/drivers daylight zones.
FCJS-ECO Wireless fixture control with EcoSystem 10 $ 75.00 Manual: Occupant selects scenes to set desired Full On Dim
light levels for all lights. Entry scene controller Personal Dimming
LRF2-DCRB-WH Radio Powr Savr wireless daylight sensor 1 $ 120.00
has 3 user preferred presets and 1 all off button.
85%
Occupant Exits:
Radio Powr Savr wireless corner-mount Max: 100% Max: 85%
LRF2-VKLB-P-WH 1 $ 85.00 All lights automatically turn off 15 minutes High-end Trim/Tuning
vacancy sensor
after all occupants exit.
PJ2-4B-GWH-L31 Pico wireless 4-button scene control 2 $ 39.00 Scene 1 Scene 1
Scene 1 Scene 2
Want to add a Vive wireless hub for more features? Go to lutron.com/vive for complete compatibility and design details.
60%
* Go to lutron.com/references for more information.
22 23
Egress Corridor | New Construction Egress Corridor | New Construction
IECC 2018 IECC 2018
Occupancy/Vacancy
When Occupied:
85%
Symbol Model Number Description Qty List Price Each Manual: Occupant uses wall dimmer to set desired
light levels for all lights. Manual control cannot fully Max: 100% Max: 85%
RMJS-8T-DV-B PowPak dimming module with 0-10 V 1 $ 150.00 shut off the lights. Minimum light level is set to 10%. High-end Trim/Tuning
Occupant Exits:
Radio Powr Savr wireless hallway
LRF2-OHLB-P-WH 1 $ 85.00 All lights automatically go to minimum light
occupancy sensor
level 15 minutes after all occupants exit.
PJ2-3BRL-GWH-L01 Pico wireless 3-button with raise/lower control 2 $ 21.00
Emergency Mode:
Lighting connected to emergency power
PICO-WBX-ADAPT Pico wallbox adapter 2 $ 8.00 turns on to full output.
Code Notes: Verify that the egress fixtures go to full output upon loss of control signal. For projects that require UL 924 compliance, provide an
automatic load control relay (ALCR) per load controller connected to emergency fixtures. Add a daylight sensor for corridors with daylight zones.
Want to add a Vive wireless hub for more features? Go to lutron.com/vive for complete compatibility and design details.
This solution requires 0-10 V enabled ballasts and drivers by others. Code Notes: For non-egress corridors, set the minimum light level to full off.
60%
* Go to lutron.com/references for more information.
24 25
Open Office | New Construction Open Office | New Construction
IECC 2018 IECC 2018
Low-voltage
wiring
DZ 1 DZ 1 DZ 1 DZ 1
Clear Connect
RF Communication
DZ 1 =
Daylight Zone
DZ 1 DZ 1 DZ 1 DZ 1
Symbol Model Number Description Qty List Price Each When Occupied:
Automatic: Overhead lights dim/brighten based Full On Dim
RMJS-8T-DV-B PowPak dimming module with 0-10 V 2 $ 150.00 on daylight availability. There is one perimeter Daylight Harvesting
daylight zone.
85%
LRF2-DCRB-WH Radio Powr Savr wireless daylight sensor 1 $ 120.00 Manual: Occupant uses wall dimmer to set Max: 100% Max: 85%
PICO-WBX-ADAPT Pico wallbox adapter 1 $ 8.00 Add a Vive wireless hub to enable simple setup
and rezoning, system monitoring, timeclock
functionality, and advanced integration.
Code Notes: For non-daylight open offices, the lighting can be connected to a single 0-10 V dimming module.
Want to add a Vive wireless hub for more features? Go to lutron.com/vive for complete compatibility and design details.
This solution requires 0-10 V enabled ballasts and drivers by others.
50%
* Go to lutron.com/references for more information.
26 27
Open Office | Recommended Open Office | Recommended
IECC 2018 IECC 2018
Clear Connect
RF Communication
Internal to fixture1 Internal fixture control with sensor 16 $ 70.002 Automatic: Each individual overhead light dims/ Daylight Harvesting
brightens based on local daylight availability.
PJ2-3BRL-GWH-L01 Pico wireless 3-button with raise/lower control 1 $ 21.00 Manual: Occupant uses wall dimmer to set Full On Dim
1 Fixture control comes pre-installed in fixture. Look for the Clear Connect Wireless symbol for fixtures containing this module. off 15 minutes after all occupants exit
High-end Trim/Tuning
Go to lutron.com/findafixture for a complete list of compatible fixtures and drivers. fixture proximity.
2 Fixture adder for the control module may vary.
Want to add a Vive wireless hub for more features? Go to lutron.com/vive for complete compatibility and design details.
This solution requires digitally enabled ballasts and drivers by others.
This solution meets the requirements of the Luminaire Level Lighting Controls (LLLC) prescriptive path specified in section C405.2.2.
This solution meets the requirements of the Enhanced Digital Lighting Controls Additional Efficiency Package (Section C406).
60%
* Go to lutron.com/references for more information.
28 29
Private Office | New Construction Private Office | New Construction
IECC 2018 IECC 2018
Low-voltage
wiring
DZ 1 DZ 1
Clear Connect
RF Communication
DZ 1 & DZ 2 =
Daylight Zones
Pico PowPak
1 required for each fixture control wireless control fixture sensor
DZ 2 DZ 2
Control Functionality Control Strategies
Occupant Enters:
Lights do not automatically turn on when an
occupant enters the space; lights must be turned on Manual On Auto Off
Symbol Model Number Description Qty List Price Each When Occupied:
Automatic: Overhead lights dim/brighten based Full On Dim
FCJS-010 Wireless fixture control with 0-10 V 2 $ 75.00 on daylight availability. There are two perimeter Daylight Harvesting
daylight zones.
FC-SENSOR PowPak fixture sensor 2 $ 35.00 Manual: Occupant uses wall dimmer to set Full On Dim
All lights automatically turn off 15 minutes Max: 100% Max: 85%
PICO-WBX-ADAPT Pico wallbox adapter 1 $ 8.00 after all occupants exit. High-end Trim/Tuning
FCJS models are capable of controlling up to 3 ballasts or drivers. Review the “Vive PowPak Fixture Controls” submittal document for more design details.
Want to add a Vive wireless hub for more features? Go to lutron.com/vive for complete compatibility and design details.
This solution requires 0-10 V enabled ballasts and drivers by others.
60%
* Go to lutron.com/references for more information.
30 31
Multi-Stall Restroom | New Construction Multi-Stall Restroom | New Construction
IECC 2018 IECC 2018
Low-voltage
wiring
Clear Connect
RF Communication
Occupancy/Vacancy
When Occupied:
85%
Symbol Model Number Description Qty List Price Each Manual: Occupant uses wall dimmer
to set desired light levels for all lights. Max: 100% Max: 85%
PJ2-3BRL-GWH-L01 Pico wireless 3-button with raise/lower control 1 $ 21.00 Add a Vive wireless hub to enable simple setup
and rezoning, system monitoring, timeclock
functionality, and advanced integration.
PICO-WBX-ADAPT Pico wallbox adapter 1 $ 8.00
Want to add a Vive wireless hub for more features? Go to lutron.com/vive for complete compatibility and design details.
This solution requires 0-10 V enabled ballasts and drivers by others.
50%
* Go to lutron.com/references for more information.
32 33
Egress Stairwell | New Construction Egress Stairwell | New Construction
IECC 2018 IECC 2018
Clear Connect
RF Communication
To To
emergency emergency
power power
Occupancy/Vacancy
Occupant Exits:
85%
Symbol Model Number Description Qty List Price Each All lights dim to minimum light level
15 minutes after all occupants exit. Max: 100% Max: 85%
FXSWLX4H Lutron 4 ft. stairwell LED fixture 2 $ 540.00 Minimum light level is set to 10%. High-end Trim/Tuning
(per floor)
Emergency Mode:
Radio Powr Savr wireless corner-mount 1
LRF2-OKLB-P-WH $ 85.00 Lighting connected to emergency
occupancy sensor (per floor)
power turns on to full output.
34 35
Egress Stairwell | Recommended Egress Stairwell | Recommended
IECC 2018 IECC 2018
Clear Connect
RF Communication
To To
emergency emergency
power power
Occupancy/Vacancy
Occupant Exits:
85%
Symbol Model Number Description Qty List Price Each All lights dim to minimum light level
15 minutes after all occupants exit. Max: 100% Max: 85%
Integral to fixture1 Integral fixture control 2 $ 60.002 Minimum light level is set to 10%. High-end Trim/Tuning
(per floor)
Emergency Mode:
Radio Powr Savr wireless corner-mount 1
LRF2-OKLB-P-WH $ 85.00 Lighting connected to emergency
occupancy sensor (per floor)
power turns on to full output.
1 Fixture control comes pre-installed in fixture. Look for the Clear Connect Wireless symbol for fixtures containing this module.
Go to lutron.com/findafixture for a complete list of compatible fixtures and drivers.
2 Fixture adder for the control module may vary.
Code Notes: Verify that the egress fixtures go to full output upon loss of control signal. For projects that require UL 924 compliance, provide an
automatic load control relay (ALCR) per load controller connected to emergency fixtures. Add a daylight sensor for stairwells with daylight zones.
This solution requires digitally enabled ballasts and drivers by others. Code Notes: For non-egress stairwells, set the minimum light level to full off.
80%
* Go to lutron.com/references for more information.
36 37
Clear Connect, EcoSystem, Hi-Lume, Lutron, Maestro, Pico, PowPak, and Quantum are trademarks of Lutron Electronics Co., Inc.,
registered in the U.S. and other countries. Energi Savr Node, Radio Powr Savr, and Vive are trademarks of Lutron Electronics Co., Inc.
lutron.com
Lutron Electronics Co., Inc., 7200 Suter Road, Coopersburg, PA 18036-1299
Customer Assistance
Online: lutron.com/help
Email: support@lutron.com
Phone: 1.844.LUTRON1 (588.7661) — includes 24/7 technical support
I
© 09/2017 Lutron Electronics Co., Inc. P/N 367-2756 REV A