Академический Документы
Профессиональный Документы
Культура Документы
Double click on the scale at the bottom of the screen set the value to 0.800
Create the Crank Shaft Drawing
Click on the Show/Erase button
Click on the
dimension,
and axis
buttons
Select Part
and View
Select the
view shown
Create the Crank Shaft Drawing
Highlight the dimensions shown, click OK
Click Close
Create the Crank Shaft Drawing
Rearrange the dimensions as shown on the next slide
To move a dimension left click and drag the mouse
To change the orientation of arrows right click while dragging (for
instance, to change the arrows from inside the dimension leaders or
outside)
See example below
Create the Crank Shaft Drawing
Create the Crank Shaft Drawing
Right click on the axis shown below and select Properties
Change the Type and enter A for the axis name
Place the Datum in the 0.5 dimension
Click OK
Create the Crank Shaft Drawing
Click on the Add Geom Tol button on the toolbar
Select the cylindrical tolerance
Click Select Entity and select the surface shown highlighted below
Create the Crank Shaft Drawing
Click Place Gtol and select the dimension highlighted below
Click on the Tol Value tab and change the tolerance value to 0.01
Click OK
Create the Crank Shaft Drawing
Click on the Add Geom Tol button on the toolbar
Select the total indicator run-out tolerance
Click Select Entity and select the surface shown highlighted below
Select Leaders as the placement type and place the dimension as
shown below
Create the Crank Shaft Drawing
Click Place Gtol and select the dimension highlighted below
Click on the Datum Refs tab and set the primary reference to datum A
and set the condition to MMC
Click on the Tol Value tab and change the tolerance value to 0.001
Click OK
Create the Crank Shaft Drawing
Select File-Properties-Drawing Options
Search for tol_dispay
Change the value to yes
Click Add/Change
Click OK
Select Done/Return
Create the Crank Shaft Drawing