Академический Документы
Профессиональный Документы
Культура Документы
SMD Resistors
Vishay Draloric / Beyschlag
KEY BENEFITS
• Broadest portfolio
• High performing products
• Standard, professional, precision, semi-precision, and ultra precision product range
FEATURES
• Resistor solutions for application-specific requirements, such as:
–– High pulse load –– Conductive gluing
–– High voltage –– Sulfur-resistant
–– High power –– Lead (Pb) bearing
–– High reliability –– Voltage divider
–– High frequency –– Trimmable
–– Low ohmic (< 1 Ω) –– Fully green
–– High ohmic (> 10 MΩ)
RESOURCES
• For technical questions, please contact: melf@vishay.com, thinfilmchip@vishay.com,
thickfilmchip@vishay.com, thinfilmarray@vishay.com, specialresistors@vishay.com
• Please find your relevant sales contacts at: www.vishay.com/doc?99914
SELECTOR GUIDE © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. 1/14
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND VMN-SG2189-1705
THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com
V I S H AY I N T E R T E C H N O L O G Y, I N C .
SMD Resistors
Vishay Draloric / Beyschlag
ACCURACY CLASSIFICATION
CRCW e3
RCA e3
Standard
CRA
e.g. TCR 100 / 1 %
RCL e3
RCC e3
Semi-Precision
CRCW-P e3
e.g. TCR 100 / 0.5 %
MC
Professional MM MC AT
e.g. TCR 50 / 1 % SMM MCW AT
ACAS
MC
MC AT
Precision MM
MCW AT
e.g. TCR 25 / 0.1 % SMM
ACAS AT
TNPW e3
TNPU e3
Ultra Precision
UM ACAS
e.g. TCR 5 / 0.05 %
ACAS AT
SELECTOR GUIDE © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. 2/14
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND VMN-SG2189-1705
THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com
V I S H AY I N T E R T E C H N O L O G Y, I N C .
SMD Resistors
Vishay Draloric / Beyschlag
Thin Film MELF Thin Film Chip Thick Film Chip Carbon Film MELF
(pp. 5-6) (pp. 7-9) (pp. 10-13) (p. 6)
CRCW-HP e3
MC CRCW-IF e3
MM
High Pulse Load MC AT RCA-IF e3 CM
SMM
MCW AT RCA-HP e3
RCS e3
CRCW-HP e3
MC AT RCL e3
MMA 0204 HT
MCW AT RCC e3
High Power MM CM
NCW AT RCS e3
SMM
MC HP RCA-HP e3
RCA-LS e3
RCA e3
MC
RCA-LS e3
MC AT
MM RCA-IF e3
Sulfur-Resistant MCW AT CM
SMM RCA-HP e3
TNPW e3
RCA-AP e4
MC HP
RCA-AU e4
MM VG03
MC VG01
High Reliability SMM0204 EN803 E8
TNPS
MS1
Low Ohmic MM
NCW AT
0.1 Ω to < 1 Ω SMM
High Ohmic OC
> 10 MΩ CRCW-HR e3
SELECTOR GUIDE © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. 3/14
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND VMN-SG2189-1705
THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com
V I S H AY I N T E R T E C H N O L O G Y, I N C .
SMD Resistors
Vishay Draloric / Beyschlag
Thin Film MELF Thin Film Chip Thick Film Chip Carbon Film MELF
(pp. 5-6) (pp. 7-9) (pp. 10-13) (p. 6)
D AP
MC ATAU CRCW-AP
Conductive Gluing
ACAS ATAU RCA AP e4
RCA AU e4
CRCW
CRCW-P
MS1 ESCC
Lead (Pb) Bearing TNPW CRCW-TR
MS1 EN803
CRCW-HR
RCA
Voltage ACAS
CRAS
Divider ACAS AT
Trimmable TC CRCW-TR e3
Fully MM
RCG e3 CM
Green SMM
CRCW e3
CRCW-P e3
ACAS AT
RCA e3
ACAS ATAU
RCL e3
MC AT
RCA-HP e3
MC ATAU
RCA-AP e4
MCW AT
AEC-Q200 MM RCA-AU e4
MC HP CM
Qualified SMM RCA-LS e3
NCW AT
RCS e3
TNPW e3
RCC e3
TNPU e3
RCA-IF e3
TNPV e3(1)
CRCW-HP e3
CRCW-IF e3
CRA
(1)
Qualification under preparation.
SELECTOR GUIDE © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. 4/14
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND VMN-SG2189-1705
THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com
V I S H AY I N T E R T E C H N O L O G Y, I N C .
SMD Resistors
Vishay Draloric / Beyschlag
MMU, MMA, MMB • Precision MELF Resistors • Precise and stable thin film technology
Precision • Size: 0102 to 0207 • IECQ-CECC approval to EN 140401-803
• Tolerance: ± 0.1 % to ± 0.5 % • Advanced level of precision and stability
• TCR: ± 15 ppm/K to ± 25 ppm/K • AEC-Q200 qualified Beyschlag
• Resistance range: 10 Ω to 1 MΩ
• Power rating: 0.2 W to 0.4 W
AUTOMOTIVE
GRADE
SMM • Precision and Professional • Precise and stable thin film technology
0102, 0204, 0207 MELF Resistors • High power rating
• Size: 0102 to 0207 • AEC-Q200 qualified
• Tolerance: ± 0.1 % to ± 5 %
Draloric
• TCR: ± 15 ppm/K to ± 100 ppm/K
• Resistance range: 0.16 Ω to 10 MΩ;
AUTOMOTIVE
(OMM) 0 Ω
GRADE
• Power rating: 0.2 W to 1 W
UMA 0204, • Ultra Precision MELF Resistors • Superior overall stability
UMB 0207 • Size: 0204; 0207 • High precision thin film technology
• Tolerance: ± 0.02 % to ± 0.25 % • IECQ-CECC approval to EN 140401-803
• TCR: ± 5 ppm/K to ± 15 ppm/K Beyschlag
• Resistance range: 22 Ω to 390 kΩ
• Power rating: 0.25 W to 0.4 W
MS1….EN803 E8 • Lead (Pb) Bearing MINI-MELF Resistors With • IECQ-CECC approval to EN 140401-803
Established Reliability version E:
• Size: 0204 Established reliability, failure rate level E8
• Tolerance: ± 0.1 %; ± 1 % • Stable metal film on high quality ceramic Draloric
• TCR: ± 15 ppm/K; ± 50 ppm/K • SnPb termination plating, Pb contents > 6 %
• Resistance range: 1 Ω to 2.21 MΩ • Meets Bellcore, MIL, and ESCC plating
• Power rating: 0.25 W requirements
SELECTOR GUIDE © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. 5/14
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND VMN-SG2189-1705
THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com
V I S H AY I N T E R T E C H N O L O G Y, I N C .
SMD Resistors
Vishay Draloric / Beyschlag
MMU 0102 HF, • High Frequency MELF Resistors • Speciality product for RF applications
MMA 0204 HF, • Size: 0102 to 0207 • Low inductance, non-helical trimmed
MMB 0207 HF • Tolerance: ± 1 % to ± 2 % product
• TCR: ± 50 ppm/K Beyschlag
• Resistance range: 1.5 Ω to 475 Ω
• Power rating: 0.3 W to 1.0 W
MMU 0102 VG03, • Precision and Professional MELF Resistors • IECQ-CECC approval to EN 140401-803,
MMA 0204 VG03, With Established Reliability version E
MMB 0207 VG03 • Size: 0102 to 0207 • Established reliability, failure rate level E6
• Tolerance: ± 0.1 % to ± 1 % (corresponds to MIL level P) Beyschlag
• TCR: ± 15 ppm/K to ± 50 ppm/K • Precise and stable thin film technology
• Resistance range: 1 Ω to 10 MΩ; 0 Ω
• Power rating: 0.2 W to 0.4 W
MMA 0204 HT • Professional High Temperature • 175 °C specified operating temperature
MINI-MELF Resistor • AEC-Q200 qualified
• Size: 0204 • Excellent stability < 0.1 %
• Tolerance: ± 0.5 % to ± 1 % Beyschlag
• TCR: ± 25 ppm/K to ± 50 ppm/K
• Resistance range: 47 Ω to 100 kΩ; 0 Ω
AUTOMOTIVE
GRADE • Power rating: 0.5 W
MMA 0204 HV • Professional High Voltage Thin Film • High operating voltage Umax. = 1000 V
MMB 0207 HV MELF Resistors • Advanced metal film technology
• Size: 0204 and 0207 • Matte Sn termination on Ni barrier layer
• Tolerance: ± 1 %
Beyschlag
• TCR: ± 50 ppm/K
• Resistance range: 340 kΩ to 10 MΩ
• Power rating: 0.4 W to 1.0 W
CMA 0204 HF • Pulse Load MELF Resistors for • Specialty product for RF applications
High Frequency Applications • ESD capability: 3 kV, human body model
• Size: 0204 • Suitable for more than 10 GHz
• Tolerance: ± 2%
Beyschlag
• TCR: -250 ppm/K
• Resistance range: 47 Ω to 300 Ω
• Power rating: 0.4 W
SELECTOR GUIDE © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. 6/14
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND VMN-SG2189-1705
THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com
V I S H AY I N T E R T E C H N O L O G Y, I N C .
SMD Resistors
Vishay Draloric / Beyschlag
TNPW • High Stability Precision Thin Film • SnPb termination plating, minimum 6 % Pb
Chip Resistors • Excellent overall stability at different
• Size: 0402 to 1210 environmental conditions
• Tolerance: ± 0.1 % to ± 1 % • Low temperature coefficient and Vishay
• TCR: ± 10 ppm/K to ± 50 ppm/K tight tolerances
• Resistance range: 10 Ω to 3.01 MΩ
• Power rating: 0.063 W to 0.33 W
TNPU e3 • High Precision Thin Film • Low temperature coefficient and
Chip Resistors tight tolerances
• Size: 0603 to 1206 • Superior moisture resistivity
• Tolerance: ± 0.02 % to ± 0.1 % • AEC-Q200 qualified Draloric
• TCR: ± 5 ppm/K to ± 10 ppm/K
• Resistance range: 100 Ω to 511 kΩ
AUTOMOTIVE
GRADE • Power rating: 0.1 W to 0.25 W
TNPV e3 • High Voltage Thin Film Flat Chip Resistors • High operating voltage Umax. up to 1000 V
• Size: 1206 and 1210 • Precision properties: TCR and tolerances
• Tolerance: ± 0.1 % to ± 1 % down to ± 10 ppm/K; ± 0.1 %
• TCR: ± 10 ppm/K to ± 50 ppm/K • Excellent overall stability at different Draloric
• Resistance range: 121 kΩ to 3.01 MΩ environmental conditions
• Power rating: 0.25 W to 0.33 W • Superior moisture resistivity
MC Professional • Professional Thin Film Chip Resistors • Excellent overall stability: Class 0.5
• Size: 0402 to 1206 • IECQ-CECC approval to EN 140401-801
• Tolerance: ± 0.5 % to ± 1 %
• TCR: ± 25 ppm/K to ± 50 ppm/K Beyschlag
• Resistance range: 1 Ω to 10 MΩ; 0 Ω
• Power rating: 0.1 W to 0.4 W
MC Precision • Precision Thin Film Chip Resistors • Superior overall stability: Class 0.1 and 0.25
• Size: 0402 to 1206 • IECQ-CECC approval to EN 140401-801
• Tolerance: ± 0.1 % to ± 0.25 %
• TCR: ± 10 ppm/K to ± 25 ppm/K Beyschlag
• Resistance range: 39 Ω to 2 MΩ
• Power rating: 0.063 W to 0.25 W
MC AT • Professional Automotive Grade Thin Film • High temperature operation up to 175 °C
Professional Chip Resistors • IECQ-CECC approval to EN 140401-801
• Size: 0402 to 1206 • AEC-Q200 qualified
• Tolerance: ± 0.5 % to ± 1 % • Superior moisture resistivity Beyschlag
• TCR: ± 25 ppm/K to ± 50 ppm/K
• Resistance range: 1 Ω to 1 MΩ; 0 Ω
AUTOMOTIVE
GRADE
• Power rating: 0.1 W to 0.4 W
MC AT • Precision Automotive Grade Thin Film Chip • Advanced level of precision and stability
Precision Resistors • IECQ-CECC approval to EN 140401-801
• Size: 0402 to 1206 • AEC-Q200 qualified
• Tolerance: ± 0.1 % • Superior moisture resistivity Beyschlag
• TCR: ± 10 ppm/K to ± 25 ppm/K
• Resistance range: 47 Ω to 1 MΩ
AUTOMOTIVE
GRADE
• Power rating: 0.1 W to 0.4 W
SELECTOR GUIDE © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. 7/14
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND VMN-SG2189-1705
THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com
V I S H AY I N T E R T E C H N O L O G Y, I N C .
SMD Resistors
Vishay Draloric / Beyschlag
MC HP • High Power Thin Film Chip Resistors • Rated dissipation P85 up to 0.4 W for size
• Size: 0402 to 0805 0805
• Tolerance: ± 0.1 % to ± 1 % • High temperature operation up to 175 °C
• TCR: ± 25 ppm/K to ± 50 ppm/K • Superior temperature cycling robustness Beyschlag
• Resistance range: 1 Ω to 100 kΩ • AEC-Q200 qualified
• Power rating: 0.2 W to 0.4 W
AUTOMOTIVE
GRADE
MCW AT • Professional Wide Terminal Thin Film Chip • Rated dissipation P85 up to 1 W
Professional Resistor • Superior temperature cycling robustness
• Size: 0406; 0612 • High temperature operation up to 175 °C
• Tolerance: ± 0.5 % to ± 1 % • AEC-Q200 qualified
Beyschlag
• TCR: ± 25 ppm/K to ± 50 ppm/K
• Resistance range: 1 Ω to 100 kΩ
• Power rating: 0.3 W to 1.0 W
AUTOMOTIVE
GRADE
MCW 0406 AT • Precision Wide Terminal Thin Film Chip • Advanced level of precision and stability
Precision Resistor • Precision (TCR of ± 15 ppm/K; ± 0.1 %
• Size: 0406 tolerance) down to 1 Ω
• Tolerance: ± 0.1 % • Superior temperature cycling robustness Beyschlag
• TCR: ± 15 ppm/K to ± 25 ppm/K • AEC-Q200 qualified
• Resistance range: 1 Ω to 100 kΩ
AUTOMOTIVE
GRADE • Power rating: 0.25 W
NCW 0406 AT • Low Ohmic Wide Terminal Thin Film • Rated power dissipation P85 = 300 mW
Chip Resistors • Resistance range down to 0.33 Ω
• Size: 0406 • Superior temperature cycling robustness
• Tolerance: ± 1 % • Superior moisture resistivity Beyschlag
• TCR: ± 50 ppm/K • AEC-Q200 qualified
• Resistance range: 0.33 Ω to 0.91 Ω
AUTOMOTIVE
GRADE • Power rating: 0.3 W
MC VG01 • Thin Film Chip Resistors With Established • Established reliability, failure rate level 6
Reliability (corresponds to MIL level P)
• Size: 0402 to 1206 • Advanced level of precision and stability
• Tolerance: ± 0.1 %; ± 1 % • IECQ-CECC Approval to EN 140401-801, Beyschlag
• TCR: ± 15 ppm/K; ± 50 ppm/K Version E
• Resistance range: 1 Ω to 1 MΩ; 0 Ω
• Power rating: 0.063 W to 0.25 W
TNPS...ESCC • Hi-Rel Thin Film Chip Resistors • ESA approval to ESCC 4001/029
• Size: 0603 to 1206 • Advanced level of precision and stability
• Tolerance: ± 0.1 % to ± 1 % • SnPb termination plating, minimum 6 % Pb
• TCR: ± 15 ppm/K to ± 50 ppm/K Draloric
• Resistance range: 10 Ω to 1 MΩ
• Power rating: 0.1 W to 0.25 W
SELECTOR GUIDE © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. 8/14
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND VMN-SG2189-1705
THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com
V I S H AY I N T E R T E C H N O L O G Y, I N C .
SMD Resistors
Vishay Draloric / Beyschlag
ACAS 0612 • Precision Thin Film Chip Resistor Array • Four insulated resistors on one substrate
Precision • Size: 0612 • Tight TCR tracking and tolerance matching
• Relative tolerance: down to ± 0.05 % • Resistance ratio up to 5:1
• Relative TCR: down to ± 5 ppm/K • For all applications with matched resistors
Beyschlag
• Resistance range: 47 Ω to 221 kΩ like voltage dividers or feedback circuits
• Power rating per element: 0.1 W
ACAS 0606 AT, • Precision Automotive Grade Thin Film • Superior moisture resistivity
ACAS 0612 AT Chip Resistor Array • Two or four insulated resistors on
• Size: 0606 and 0612 one substrate
• Relative tolerance: down to ± 0.05 % • Tight TCR tracking and tolerance matching
• Relative TCR: down to ± 5 ppm/K • Resistance ratio up to 20:1 Beyschlag
• Resistance Range: 47 Ω to 150 kΩ • AEC-Q200 qualified
• Power rating per element: 0.125 W • Perfect for automotive and industrial
AUTOMOTIVE
applications with matched resistors like
GRADE
voltage dividers or feedback circuits
ACAS 0606 ATAU • Precision Gold-Terminated Thin Film Chip • Gold terminations for conductive gluing
Precision Resistor Array for Conductive Gluing • Two insulated resistors on one substrate
• Size: 0606 • Tight TCR tracking and tolerance matching
• Relative tolerance: down to ± 0.05 % • Resistance ratio up to 20:1
Beyschlag
• Relative TCR: down to ± 5 ppm/K • Superior moisture resistivity
• Resistance range: 100 Ω to 150 kΩ • AEC-Q200 qualified
AUTOMOTIVE
• Power rating per element: 0.125 W
GRADE
SELECTOR GUIDE © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. 9/14
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND VMN-SG2189-1705
THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com
V I S H AY I N T E R T E C H N O L O G Y, I N C .
SMD Resistors
Vishay Draloric / Beyschlag
RCA e3 • Automotive Grade, Sulfur-Resistant, Lead • Superior resistance against H2S atmosphere
(Pb)-Free, Thick Film Chip Resistors • AEC-Q200 qualified
• Size: 0402 to 2512 • Metal glaze on high quality ceramic
• Resistance range: 1 Ω to 10 MΩ Draloric
• Power rating: 0.063 W to 1 W
• Zero ohm jumper: available for all sizes
RCA • Lead (Pb)-Bearing Automotive Grade, • Superior resistance against H2S atmosphere
Sulfur-Resistant, Thick Film Chip Resistors • SnPb termination plating on Ni barrier,
• Size: 0402 to 2512 minimum 10 % Pb
• Resistance range: 1 Ω to 10 MΩ Vishay
• Power rating: 0.063 W to 1 W
• Zero ohm jumper: available for all sizes
RCC e3 • Medium Power Thick Film Chip Resistors • Enhanced power rating up to 0.25 W
• Size: 0603; 0805 • AEC-Q200 qualified
• Resistance range: 1 Ω to 10 MΩ Vishay
• Power rating: 0.2 W to 0.25 W
• Zero ohm jumper available
CRCW-HP e3 • Pulse-Proof, High Power Thick Film Chip • Excellent pulse load capability
Resistors • Enhanced power rating
• Size: 0402 to 2512 • Double-sided printed resistor element
• Resistance range: 1 Ω to 1 MΩ • Protective overglaze Draloric
• Power rating: 0.125 W to 1.5 W • AEC-Q200 qualified, rev. C compliant
• Tolerance: ± 0.5 %
SELECTOR GUIDE © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. 10/14
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND VMN-SG2189-1705
THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com
V I S H AY I N T E R T E C H N O L O G Y, I N C .
SMD Resistors
Vishay Draloric / Beyschlag
RCG e3 • Fully RoHS-Compliant, Green, Thick Film, • Green resistor – does not use
Rectangular Chip Resistors RoHS exemptions
• Size: 0402 to 1206 • Stability: ± 1 % for 1000 h at 70 °C, for
Draloric
• Resistance range: 1 Ω to 10 MΩ ± 1 % tolerance
• Power rating: 0.063 W to 0.25 W • Metal glaze on high quality ceramic
D AP, CRCW-AP • Thick Film, Rectangular Chip Resistors for • AgPd terminations for conductive gluing
Conductive Gluing • Stability: ± 1 % for 1000 h at 70 °C, for
• Size: 0402 to 2512 ± 1 % tolerance
Draloric
• Resistance range: 3.6 Ω to 10 MΩ • Metal glaze on high quality ceramic
• Power rating: 0.063 W to 1 W
• Zero ohm jumper: available for all sizes
SELECTOR GUIDE © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. 11/14
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND VMN-SG2189-1705
THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com
V I S H AY I N T E R T E C H N O L O G Y, I N C .
SMD Resistors
Vishay Draloric / Beyschlag
RCA-AU e4 • Sulfur-Resistant, Gold-Terminated Thick Film • Gold (Au) terminations for conductive gluing
Chip Resistors for Conductive Gluing • Excellent performance in sulfur environments
• Size: 0402; 0603 • High temperature operation up to 175 °C
• Resistance range: 1 Ω to 10 MΩ • AEC-Q200 qualified Vishay
• Power rating: 0.1 W to 0.15 W
• Zero ohm jumper available
D/CRCW-HR e3 • Thick Film, Rectangular, High Value Chip • High resistance values (up to 470 MΩ)
Resistors • Suitable for voltage dividers and hybrids
• Size: 0603 to 1206 • Metal glaze on high quality ceramic
• Resistance range: 11 MΩ to 470 MΩ • Protective overglaze Vishay
• Power rating: 0.1 W to 0.25 W
OCT 0603, • High Ohmic Thick Film Flat Chip Resistors • Wide ohmic range from 11 MΩ to 130 MΩ
OCU 0805 • Size: 0603; 0805 • Excellent overall stability
• Tolerance: ± 5 %
• TCR: ± 100 ppm/K to ± 250 ppm/K Beyschlag
• Resistance range: 11 MΩ to 130 MΩ
• Power rating: limited by Umax
D/CRCW-HR • Lead (Pb)-bearing Thick Film, Rectangular • High resistance values (up to 470 MΩ)
High Value Chip Resistor • Suitable for voltage dividers and hybrids
• Size: 0603 to 1206 • SnPb termination plating on Ni barrier,
• Resistance range: 11 MΩ to 470 MΩ minimum 10 % Pb Vishay
• Power rating: 0.1 W to 0.25 W • Metal glaze on high quality ceramic
• Protective overglaze
D/CRCW-TR e3 • Thick Film, Rectangular, Trimmable Chip • Can be trimmed to the required value
Resistors after insertion
• Size: 0402 to 2512 • For applications in precision circuitry where
• Resistance range: 0.47 Ω to 10 MΩ relative tolerances can be compensated Vishay
• Power rating: 0.063 W to 1.0 W by trimming
• Metal glaze on high quality ceramic
• Protective overglaze
D/CRCW-TR • Lead (Pb) Bearing Thick Film, Rectangular, • Can be trimmed to the required value
Trimmable Chip Resistors after insertion
• Size: 0402 to 2512 • For applications in precision circuitry where
• Resistance range: 0.47 Ω to 10 MΩ relative tolerances can be compensated
• Power rating: 0.063 W to 1.0 W by trimming Vishay
• SnPb termination plating on Ni barrier,
minimum 10 % Pb
• Metal glaze on high quality ceramic
• Protective overglaze
SELECTOR GUIDE © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. 12/14
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND VMN-SG2189-1705
THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com
V I S H AY I N T E R T E C H N O L O G Y, I N C .
SMD Resistors
Vishay Draloric / Beyschlag
CRCW0201 e3 • Commodity Thick Film Chip Resistors • High volume product suitable for
• Size: 0201 commercial applications
• Resistance range: 1 Ω to 10 MΩ • Metal glaze on high quality ceramic Vishay
• Power rating: 0.05 W
• Tolerance: ± 0.5 %
CRCW01005 e3 • Commodity Thick Film Chip Resistors • High volume product suitable for
• Size: 01005 commercial applications
• Resistance range: 1 Ω to 1 MΩ • Metal glaze on high quality ceramic Vishay
• Power rating: 0.031 W
• Tolerance: ± 1 %
CRA04S • Thick Film Chip Resistor Array • Convex terminal array with square corners
• Size: 0404 to 0408 • 4- or 8-terminal package with isolated
• Power rating per element: 0.063 W resistors Vishay
• Resistance range: 10 Ω to 1 MΩ
CRA04P • Thick Film Chip Resistor Array • Concave terminal array with square corners
• Size: 0408 • 8-terminal package with isolated resistors
• Power rating: 0.063 W Vishay
• Resistance range: 1 Ω to 1 MΩ
CRA06E, CRA06S • Thick Film Chip Resistor Array • Convex terminal array available with either
• Size: 0606 to 0612 scalloped corners (E version) or square
• Power rating per element: 0.063 W corners (S version)
• Resistance range: 10 Ω to 1 MΩ • 4- or 8-terminal package with isolated Vishay
resistors
CRA06P • Thick Film Chip Resistor Array • Concave terminal array with square corners
• Size: 0606 to 0612 • 4- or 8-terminal package with isolated
• Power rating per element: 0.063 W resistors Vishay
• Resistance range: 10 Ω to 1 MΩ
CRA12E, CRA12S • Thick Film Chip Resistor Array • Convex terminal array available with either
• Size: 1220 to 1225 scalloped corners (E version) or square
• Power rating per element: 0.1 W to 0.125 W corners (S version)
• Resistance range: 10 Ω to 1 MΩ • Wide ohmic range: 10 Ω to 1 MΩ Vishay
• 8- or 10-terminal package with isolated
resistors
CRAS0606, • Thick Film Chip Resistor Array, • 4- or 8-terminal package with isolated
CRAS0612, Different Values resistors
CRAE0612 • Size: 0606; 0612 • Different values (CRAS0606 model) or two
• Power rating per element: 0.063 W pairs of values (CRAS0612 / CRAE0612
• Resistance range: 10 Ω to 1 MΩ model)
• Wide ohmic range: 10 Ω to 1 MΩ Draloric
• Convex terminal array available with either
scalloped corners (E version) or square
corners (S version)
• AEC-Q200 qualified
SELECTOR GUIDE © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. 13/14
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND VMN-SG2189-1705
THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com
V I S H AY I N T E R T E C H N O L O G Y, I N C .
SMD Resistors
Selector Guide
www.vishay.com
Two of the most important manufacturers of fixed film resistors are the Vishay Draloric and the Vishay Beyschlag brands.
Visit us at:
http://www.vishay.com/company/brands/draloric
SELECTOR GUIDE © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. 14/14
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND VMN-SG2189-1705
THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com