Академический Документы
Профессиональный Документы
Культура Документы
OBJECTIVE:
In this experiment we connect VFD to Induction motor and enable the motor.
Procedure:-
Switch ON the trainer checks supply voltage 220Vac on 220Vac supply section with DMM.
Connect the power supply L and N to VFD as shown in the below figure.
Switch OFF the trainer connects the enabling connection of the VFD.
Connection of the VFD enabling mention below
Connect 8 and 7.
Connect 8 and 5
Connect 2 and 4
Connect 1 to potentiometer B
Connect 2 to potentiometer A
Connect 3 to Potentiometer Z
Increase the motor Frequency 0-50HZ and fill the table mention below.
Frequency RPM Amperes