Академический Документы
Профессиональный Документы
Культура Документы
Environment Reliability
Test Report
This document contains proprietary and confidential information of Foxconn. All rights and titles
hereto remain with Foxconn. The recipient shall keep this document in strict confidence and shall
use this document in the manner and solely for purposes expressly agreed to by Foxconn. The
recipient shall not disclose or allow access to this document, in whole or in part, by third parties, nor
use it for the benefit of the recipient or third parties. The recipient shall not change this document in
form and substance by any means, including without limitation, decompile, reproduce, revise, and
amend.
FOXCONN CONFIDENTIAL
FX ML350p Gen8 Sustaining ER Test Report
※※ MODIFIED HISTORY ※※
FOXCONN CONFIDENTIAL
FX ML350p Gen8 Sustaining ER Test Report
Test Item Summary
Sampling Test
No. Test Item Spec
QTY Stage Result
Temperature:0°C~40°C;
Operating Temperature Humidity: 5~95%;
1 1 Sustaining Pass
and Humidity test Test duration: 4 days;
Test software: ETD Meatgrinder 4.730
FOXCONN CONFIDENTIAL 1
FX ML350p Gen8 Sustaining ER Test Report
Table of Contents
Test Configuration .............................................................................................................. 3
FOXCONN CONFIDENTIAL 2
FX ML350p Gen8 Sustaining ER Test Report
Test Configuration
FOXCONN CONFIDENTIAL 3
FX ML350p Gen8 Sustaining ER Test Report
Test Equipment
1) Unit Under Test (UUT)
2) Temperature/Humidity Chamber
3) Test Software: OS Window 2012, ETD Meatgrinder 4.730.
Note: Test site is FXN TJ R&D lab.
Test Samples
1. The UUT configuration shall be approved by HP prior to testing.
2. Multiple configurations may be required to be tested, depending on the project’s complexity and
goals. Each configuration shall be tested separately.
Note: Serial number PBYFTXCTM2A00F
Test Specifications
The unit shall be fully functional from 5 to 95% relative humidity, 28℃ maximum wet bulb
temperature, (non-condensing) across the operating temperature range of 0℃ to 40℃
Test Conditions
1. Run ETD Meatgrinder 4.730;
2. Test duration: 4 cycles.
FOXCONN CONFIDENTIAL 4
FX ML350p Gen8 Sustaining ER Test Report
Test Procedure
1. Begin with the UUT powered off
2. Log all UUT configuration information, software used, revision level, etc. for report
generation once testing is complete.
3. Place UUT in Humidity test chamber.
4. Power UUT on and launch Meatgrinder using the approved configuration file.
5. Allow Meatgrinder to run a minimum of twenty minutes.
6. Halt Meatgrinder and examine the log file for any failures or warnings.
7. If any failures or warnings are logged, they must be documented in the test report and
corrected before the test is continued.
8. Save the Meatgrinder log file for attachment to the report.
9. If the unit passed the pre-test in Steps 4 through 7, proceed to Step 10.
10. Program the test chamber per the Operational Temperature and Humidity profile as above.
11. Complete the Operational Temperature and Humidity test as shown above. The standard
test duration shall be four 24-hour cycles.
12. Launch Meatgrinder using the approved configuration file.
13. Allow Meatgrinder to run a minimum of twenty minutes.
14. Halt Meatgrinder and examine the log file for any failures or warnings.
15. If any failures or warnings are logged, they must be documented in the test report.
16. Save the Meatgrinder log file for attachment to the report.
Pass/Fail Criteria:
1. During and after the Operational Temperature and Humidity test, the UUT must perform
functionally as intended.
2. No cosmetic damage to the UUT is allowed.
FOXCONN CONFIDENTIAL 5
FX ML350p Gen8 Sustaining ER Test Report
Test Picture:
During Test
Test Result:
Test Software Visual Check Functional Check Test Result
ETD Meatgrinder 4.730 Pass Pass Pass
Test Logs:
ETD Logs
logs.zip
FOXCONN CONFIDENTIAL 6