Академический Документы
Профессиональный Документы
Культура Документы
ACROW MISR Provides Full Site Service Based On More Than 35 Years Experience In The Field
C
Contents
Contents
Introduction
Advantages
2
Features 4
Application 7
Componants 10
Introduction
Being one of the largest formwork This formwork slab support can be is the only tool required for erection
and scaffolding companies, we are used in a wide variety of applications and dismantling of the system.
introducing the Cuplock system. It from light to heavy duty scaffolding Several accessories ensure the
is a complete system that provides and shoring for buildings and other adaptability of the system to a wide
access scaffolding and formwork slab civil engineering work. In addition, no variety of applications.
support. loose fittings are required. A hammer
2
Advantages
•It can be used for both scaffolding components, all can be easily handled speedily and simply without disturbing
and shoring systems. by one man. the main structure of the scaffold.
•Minimum supervision is required •Ledgers are non-load bearing •Cup-lock system components are
since the system is rapidly erected and can therefore be assembled at manufactured from high quality tube
and dismantled using the interlocking handrail height on external faces of having the same outside diameter
components which are rigidly secured independent scaffolding, thus offering as the traditional scaffold tube to
with two cups. Simply hammered with the additional safety of handrails at all facilitate tying scaffold to the building.
no need for spanners. working levels.
•Due to the lightness of the system •Working levels can be changed
3
Features
The standard is the vertical member of cup lock system. It is made from high grade steel
tube with outer diameter of 48.3 mm and thickness of 3.2 mm.
1- Standards A series of bottom cups are welded at nominal 500 mm centers and free top cup to
ensure providing a safe connection at any direction for the horizontal ledger attachment.
Cup-lock sizes vary from 0.5 m to 3.0 m.
4
Features
The ledger is the horizontal member used to connect the standards in both the
longitudinal and transversal directions. It is made of the same vertical tube.
2 -Ledger
They are welded together to blade the ends and fit in the bottom cup located in the
standard.
Ledger sizes vary from 0.6 m to 2.4 m.
5
Cup lock standards loadings
Technical Data
unbraced length
7.15 t
4.20 t
2.20 t
1.40 t
100 cm 150 cm 200 cm 250 cm
unbraced length
8.00 t
6.10 t
3.45 t
2.20 t
6
Application
7
Applications
Bracing Tube
Steel Plank
Cuplock Standard
Cuplock Ledger
8
Applications
9
Componants
Cuplock ledger
2.40m 6221177056018 8.34
2.10m 6221177056001 7.33
1.80m 6221177055998 6.33
1.50m 6221177055981 5.32
1.20m 6221177055974 4.32
0.90m 6221177055967 3.31
10
Componants
11
Componants
12
Componants
13
acrow
acrow
5
7
acrow
acrow
acrow
3 acrow
1 9 8
2
6
acrow
acrow
8 UAE 9 Qatar
Acrow Gulf Acrow Qatar
Tel: +971 4343 94 98 Tel: +974 4582 357 acrow
acrow
Fax: +971 4343 95 98
acrow
Fax: +974 4582 376
E.mail: acrowgulf@acrow.co E.mail: acrowqatar@acrow.co
Acrow H20 & solider Acrow One shutter solider
Acrow V.M.C Acrow Tech-Form Acrow Cuplock Acrow Bridge table form
Acrow Circular column Acrow climbing system Acrow shorbrace Table form Acrow Big steel panel
Acrow European prop Acrow Vari form Acrow Prop table form Acrow frame
02/2013, Code No.: 2007050061012
w w w. a c ro w. c o