Академический Документы
Профессиональный Документы
Культура Документы
Founded in 1983, Pro-Therm has served to the industry on design and manufacturing needs of
process equipment such as shell and tube heat exchangers, Air Coolers, compression systems,
filtration and drying of air and gases, pressure vessels, cooling towers, etc.
GAS
Two CO2 dryer units using adsorption technology with Activated Alumina. Hydrate
formation must be avoided. Designed for 25 MMscfd each one @ 33 Atm. 2017.
13 air coolers for naphtha, diesel and other components for a naphtha destination plant.
2017
NRU skid for the control of the Fuel Gas Heat Value, feeding natural gas from Atasta or
Akal gas C8 to produce 60 of MMscfd of fuel conditioned gas, rejecting the excess content
of Nitrogen and make richer the product gas. (2014).
Gas separation plant with Membrane technology, for a flow rate of 150 MMscfd, lowering
the CO2 content from 70% to less than 5% and from 7,900 ppm of H2S to less than 100
ppm in the Pemex Carmito plant PEP in 1997.
Design, install and commissioning a CO2 and H2S removal plant using MDEA (tertiary
amines) in Mexico for Hylsa company, in Monterrey Mexico.
12 years operating production batteries at Burgos Basin, which covers Culebra Norte,
Culebra Sur, Francisco Cano, Monclova Station, Merced, Pandura, Km 19 Battery, etc.
Design, Manufacture and Operation of natural gas batteries for MPG Oil Gas company
on Pirineos gas Basin.
Design, Manufacture and Operation of natural gas batteries for MPG Oil Gas company
on Monclova gas Basin.
PRO-THERM, S.A. de C.V.
Environmental, Process & Thermal Products
www.pro-therm.net info@pro-therm.net
Gas Processing Monterrey- México
CRUDE OIL.
Vertical Hydrostatic Oil Dehydrator for 10,000 BPD built for UOP (Unites States).
Actually running at Republic of the Congo.
Indirect Oil Heaters for heavy oil for ICA-Fluor- Pemex ATG
We have achieved good results 0n crude oil dehydration, using a feed oil with 20
API, flow rate of 33,000 bbpd in 1997. Feed with more than 40% of water (water
with more than 250,000 ppm of salt) and exiting with 0.02% of water And less than
10 pounds of salt/ a thousand bbls of oil.
In a 10-day running test with the chemical treatment of Marine Light Crude at
Terminal of Dos Bocas port, results were achieved from the first day of up to 6
pounds / Mbbl of oil & grease content on water and water content in oil, of not
more than 0.4%.
We also designed, manufactured, installed and commissioned two indirect oil
heaters to improve transportation of heavy oil with API 11 in EPC (Ebano-Panuco-
Cacalilao) reducing the viscosity from about 60,000 to less than 9 Cp, In order to
minimize the handling risks and energy saving as well. Designed according to
ASME and API Codes, NRF-089-PEMEX-2004, among others.
OTHERS.
Membrane unit to reduce the content of H2S with 57,000 ppm to less than 200
ppm for lift gas.
Dew Point Control Unit to avoid hydrates formation for the Pandora station in the
North of Mexico.
PRO-THERM, S.A. de C.V.
Environmental, Process & Thermal Products
www.pro-therm.net info@pro-therm.net
Gas Processing Monterrey- México
100% Oil Free system skid for Natural gas at 440 Psig
Valve skid for thermal fluid. Design and manufacturing gas separator.
For BURGOS Gas Field. 2010
SOME PROJECTS
Cooling Tower System, for 3,450 GPM Client: Vitro Flex, S.A. de C.V.
1994
OTHERS.
Exclusive representative of Membrane Technology and Research Inc. (MTR),
membrane technology, related to:
We have a collaborative agreement with Virtual Material Group, who has a long
history on oil, gas and petrochemical industry all over the world.