Вы находитесь на странице: 1из 4

Pressure applied inside a pipe creates stress in

the pipe wall. These stresses are highest on which Longitudinal weld
weld orientation?

Per B31.3, how much RT is conducted on


5%
circumferential welds of a pipe in normal service?

For welded pipe, the normal thickness of


Mill tolerances : 0.01”
under-tolerance is?

The corrosiveness of soils can be


Resistivity
determined by measuring the soils

When qualifying a weld procedure the


Be recorded on both the WPS & PQR
essential variables must
In severe refinery services which type of pipe Seamless Pipe
is normally used?

A pipe has a thickness designation of "40S".


Stainless
What does the "S" mean?

Generally socket-welded pipe is not used


More than 2 inches
for nominal pipe sizes above:

A propane piping system should be


classified as? Class 1

According to ASME/ANSI B16.5 flanges from Blind Flange


plate materials can only be used for :

Вам также может понравиться