Вы находитесь на странице: 1из 17

Technical Education and Skills Development Authority

TRAINEE RECORD BOOK

Student No. 012017

NAME : RAPHAEL B. OFRACIO

COURSE : ELECTRICAL INSTALLATION AND MAINTENANCE NC II

TRAINING DURATION : 264 HRS / 33 DAYS

INSTRUCTOR : ENGR. MARK AŇONUEVO

1
Instructions:

This Trainees Record Book (TRB) is intended to serve


as record of all accomplishment/task/activities while
undergoing training in the school and industry. It will
eventually become evidence that can be submitted for
portfolio assessment and for whatever purpose it will serve
you. It is therefore important that both the trainees and
instructor viably enter all its contents.

The Trainees Record Book contains all the required


competencies in ELECTRICAL INSTALLATION AND
MAINTENANCE NC II. All you have to do is to fill in the
column “Task Required” and “Date Accomplished” will all the
activities in accordance with the training program and to be
taken up in the school and with the guidance of the instructor.
The instructor will likewise indicate his/her remarks on the
“Instructors remarks” column regarding the outcome of the
task accomplished by the trainees. Be sure that the trainee will
personally accomplish the task and confirmed by the
instructor.

It is of great importance that the content should be


written legibly on ink. Avoid any corrections or erasures and
maintain the cleanliness of this record.

This will be collected by your instructor and submit the


same to the Acting Vocational Instruction Supervisor (VIS) and
shall form part of the permanent trainee’s document on file.

Thank You.

Trainer

2
Unit of Competency:

PARTICIPATE IN WORKPLACE COMMUNICATION

Learning Task Required Date Instructors


Outcome Accomplished Remarks
Obtain and convey Use Effective 4/15/2017 COMPLETED
workplace questioning , active
information listening and
speaking skills

Use appropriate
medium to transfer
information and
ideas

Conduct Workplace 4/15/2017 COMPLETED


Participate in interactions in a
workplace courteous manner
meetings and
discussions
Complete relevant Complete accurately 4/15/2017 COMPLETED
work related and legibly the range
documents of forms relating to
conditions of
employment.

Use Basic
mathematical
processes for routine
calculations

Raphael Ofracio Mark Anonuevo


RAPHAEL B. OFRACIO MARK AŇONUEVO
Trainee’s Signature Trainer’s Signature

3
Unit of Competency:

WORK IN TEAM ENVIRONMENT

Learning Task Required Date Instructors


Outcome Accomplished Remarks
Describe team role Identify from 4/15/2017 COMPLETED
and scope available sources of
information the role
and objective of the
team

Identify own role Identify and 4/15/2017 COMPLETED


and responsibility recognize the roles
within team and responsibility
of other team
members
Work as a team Observe protocols 4/15/2017 COMPLETED
member in reporting using
standard operating
procedures

Raphael Ofracio Mark Anonuevo


RAPHAEL B. OFRACIO MARK AŇONUEVO
Trainee’s Signature Trainer’s Signature

4
Unit of Competency:

PRACTICE CAREER PROFESSIONALISM

Learning Outcome Task Required Date Instructors


Accomplished Remarks
Integrate personal Improve the 4/15/2017 COMPLETED
qualifications set
objectives with
for the profession
organizational goals towards personal
growth and work
plans

Maintain Intra-
and interpersonal
relationships in
the course of
managing oneself
based on
performance
evaluation

Set and meet work Utilize Resources 4/15/2017 COMPLETED


are efficiently and
priorities
effectively to
manage work
priorities and
commitments
Maintain professional Identify and avail 4/15/2017 COMPLETED
Trainings and
growth and
career opportunities
development based on job
requirements

Raphael Ofracio Mark Anonuevo


RAPHAEL B. OFRACIO MARK AŇONUEVO
Trainee’s Signature Trainer’s Signature

5
Unit of Competency:

PRACTICE OCCUPATIONAL HEALTH AND SAFETY PROCEDURES

Learning Task Required Date Instructors


Outcome Accomplished Remarks
Identify hazards Clarify and explain 4/15/2017 COMPLETED
and risks Safety regulations
and workplace safety
and hazard control
practices and
procedures based on
organization
procedures

Identify
Hazards/risks in the
workplace and their
corresponding
indicators to
minimize or
eliminate risk to co-
workers, workplace
and environment in
accordance with
organization
procedures

Recognize and
establish
Contingency
measures during
workplace accidents,
fire and other
emergencies in
accordance with
organization
procedures
Evaluate hazards Determine the 4/15/2017 COMPLETED
and risks Effects of the
hazards
Control hazards Follow consistently 4/15/2017 COMPLETED
and risks the Occupational
Health and Safety
(OHS) procedures for
controlling
hazards/risks in
workplace
6
Maintain OHS Participate in 4/15/2017 COMPLETED
awareness Emergency-related
drills and trainings as
per established
organization guidelines
and procedures

Complete and update


OHS personal records
are in accordance with
workplace
requirements

Raphael Ofracio Mark Anonuevo


RAPHAEL B. OFRACIO MARK AŇONUEVO
Trainee’s Signature Trainer’s Signature

7
Unit of Competency:

USE HAND TOOLS

Learning Outcome Task Required Date Instructors


Accomplished Remarks

Plan and prepare Identify hand tools 4/15/2017 COMPLETED


for tasks to be
undertaken
Prepare hand tools Check hand tools for 4/15/2017 COMPLETED
proper operation and
safety

Use appropriate Observe All safety 4/15/2017 COMPLETED


hand tools and test procedures in using
equipment tools at all times

Use appropriate
personal protective
equipment (PPE)
Plan and prepare Routine maintenance 4/15/2017 COMPLETED
for tasks to be of tools undertaken
undertaken according to
standard operational
procedures,
principles and
techniques

Proper tool keeping

Raphael Ofracio Mark Anonuevo


RAPHAEL B. OFRACIO MARK AŇONUEVO
Trainees Signature Trainer’s Signature

8
Unit of Competency:

PERFORM MENSURATION AND CALCULATION

Learning Task Required Date Instructors


Outcome Accomplished Remarks
Select measuring Identify of measuring 4/15/2017 COMPLETED
instruments instruments

Carry out Obtain measurements 4/15/2017 COMPLETED


measurements and and calculation
calculation
Maintain Clean measuring 4/15/2017 COMPLETED
measuring Instrument tools and
instruments proper storage

Raphael Ofracio Mark Anonuevo


RAPHAEL B. OFRACIO MARK AŇONUEVO
Trainees Signature Trainer’s Signature

9
Unit of Competency:
PREPARE AND INTERPRET TECHNICAL DRAWING

Learning Task Required Date Instructors


Outcome Accomplished Remarks
Segregate Technical 4/15/2017 COMPLETED
Identify
drawings in accordance
different kinds
with the types and kinds
of technical
of drawings
drawings
Interpret technical 4/15/2017 COMPLETED
Interpret
drawing
technical
Identify Signs and symbols
drawing
Draw Electrical/electronic 4/15/2017 COMPLETED
Prepare/ make
schematic and wiring
changes to
diagrams.
electrical/
electronic
schematics
and drawings
Select storage of technical 4/15/2017 COMPLETED
Store technical
drawing, tools and
drawings and
equipment/ instruments.
equipment/
instruments

Raphael Ofracio Mark Anonuevo


RAPHAEL B. OFRACIO MARK AŇONUEVO
Trainees Signature Trainer’s Signature

10
Unit of Competency:
APPLY QUALITY STANDARDS

Learning Task Required Date Instructors


Outcome Accomplished Remarks
Check Received materials 4/15/2017 COMPLETED
1. Assess quality
or component parts
of received
materials or Identify materials or
components
components
Check Completed work 4/15/2017 COMPLETED
2. Assess own
work
Monitor Performance of 4/15/2017 COMPLETED
3. Engage in
operation or quality of
quality
product or service to
improvement
ensure customer
satisfaction

Raphael Ofracio Mark Anonuevo


RAPHAEL B. OFRACIO MARK AŇONUEVO
Trainees Signature Trainer’s Signature

11
Unit of Competency:
TERMINATE AND CONNECT ELECTRICAL WIRING AND
ELECTRONICS CIRCUIT

Learning Task Required Date Instructors


Outcome Accomplished Remarks
Prepare plan for work 4/15/2017 COMPLETED
1. Plan and
prepare for
Identify tools and
termination/
materials
connection of
electrical
Perform termination/
wiring/electro
connection of electrical
nics circuits
wiring

Observe OHS
Plan for work 4/15/2017 COMPLETED
2. Terminate/
connect
Perform wiring connection
electrical
wiring/
Observe OHS
electronic
circuits
Identify tools and 4/15/2017 COMPLETED
3. Test
materials
termination/
connections
Perform testing activities
of electrical
using test Instruments
wiring/
electronics
Observe OHS
circuits

Raphael Ofracio Mark Anonuevo


RAPHAEL B. OFRACIO MARK AŇONUEVO
Trainees Signature Trainer’s Signature

12
CORE COMPETENCIES

Unit of Competency:
PERFORM ROUGHING –IN ACTIVITIES,WIRING AND
CABLING WORKS FOR SINGLE PHASE DISTRIBUTION, POWER
LIGHTING AND AUXILLIARY SYSTEM

Learning Task Required Date Instructors


Outcome Accomplished Remarks
Interpret electrical plan 4/15/2017 COMPLETED
Install electrical
Prepare and identify tools
metallic/non-
and materials needed
metallic (PVC
conduit)
Install metallic and non
metallic (PVC) conduit

Perform pipe laying


installation
Observe OHS

Install wire ways Prepare and identify tools 4/15/2017 COMPLETED


and cable tray and materials needed

Plan for Work

Install wire ways and


cable trays

Observe OHS

Install auxiliary Plan for work 4/15/2017 COMPLETED


terminal cabinet
and distribution Install auxiliary terminal
panel cabinet and distribution
panel

Perform cabling works


Prepare force Prepare tools and material 4/15/2017 COMPLETED
able pulling and needed
installation Perform cable lay out
Perform cable pulling
activity

13
Perform wiring Perform wiring and cabling 4/15/2017 COMPLETED
and cabling lay lay out
out Observed OHS

Notify Notify supervisor upon 4/15/2017 COMPLETED


completion of completion of work
work

Raphael Ofracio Mark Anonuevo


RAPHAEL B. OFRACIO MARK AŇONUEVO
Trainees Signature Trainer’s Signature

14
Unit of Competency :

INSTALL ELECTRICAL PROTECTIVE DEVICES FOR DISRIBUTION,


POWER, LIGHTING, AUXILLIARY, LIGHTNING PROTECTION AND
GROUNDING SYSTEMS

Learning Task Required Date Instructors


Outcome Accomplished Remarks

Plan and prepare Plan and prepare for work 4/15/2017 COMPLETED
work
Prepare tools/ PPE equipment
and materials needed

Install electrical Prepare tools/ PPE 4/15/2017 COMPLETED


protective equipment and materials
devices needed

Install electrical protective


device

Install lighting Prepare tools/ equipment 4/15/2017 COMPLETED


fixture and and materials needed
auxiliary outlet
Perform / install lighting
fixture and outlets

Apply OHS and PPE


Notify Notify Supervisor upon 4/15/2017 COMPLETED
completion of Completion of work
work.

Raphael Ofracio Mark Anonuevo


RAPHAEL B. OFRACIO MARK AŇONUEVO
Trainees Signature Trainer’s Signature

15
Unit of Competency:
INSTALL WIRING DEVICES OF FLOOR AND WALL MOUNTED
OUTLETS, LIGHTING FIXTURES / SWITCHES, AND AUXILLIARY
OUTLETS

Learning Outcome Task Required Date Accomplished Instructors


Remarks
Select wiring Prepare tools / 4/15/2017 COMPLETED
devices equipment and
materials

Inspect materials
and wiring devices
Install wiring Follow safety 4/15/2017 COMPLETED
devices procedures

Install wiring
devices
3 Install lighting Install lighting 4/15/2017 COMPLETED
fixture/switches fixtures and
switches

Observe OHS

Notify completion Notify Supervisor 4/15/2017 COMPLETED


of work upon Completion
of work

Raphael Ofracio Mark Anonuevo


RAPHAEL B. OFRACIO MARK AŇONUEVO
Trainees Signature Trainer, Signature

16
Notes:

The trainee is participative


The trainee is dedicated to his work
The trainee has full interest on his training.

17

Вам также может понравиться