ABSTRACT This iot servos are motion controlled that imitates our action ,display colors based on the finger position over the pad position. We need some hardware and software for this project. For leap motion controller we are going to install java SDK for source code we need to install leap motion and PubNub java libraries. Then we have to setup the Raspberry pi. Then we are going to set up Raspberry pi to servos driver connection . Then we are going to use the python code to control the servos. Then we have to put PubNub keys. For showdown Raspberry pi then installed the push button on the back of the box with RGBLED indicator. Then we need to build the physical box.