Вы находитесь на странице: 1из 1

LIFE-SAVING RULES

Bypassing Safety Controls Confined Space Driving


Obtain authorisation Obtain authorisation Follow safe driving
before overriding before entering a rules
or disabling safety confined space • I always wear a
controls • I confirm energy seatbelt
• I understand and use safety-critical sources are isolated • I do not exceed the speed
equipment and procedures which • I confirm the atmosphere has been limit, and reduce my speed for
apply to my task tested and is monitored road conditions
• I obtain authorisation before: • I check and use my breathing • I do not use phones or operate
–– disabling or overriding safety apparatus when required devices while driving
equipment • I confirm there is an attendant • I am fit, rested and fully alert while
–– deviating from procedures standing by driving
–– crossing a barrier • I confirm a rescue plan is in place • I follow journey management
• I obtain authorisation to enter requirements 

Energy Isolation Hot Work Line of Fire


Verify isolation and Control flammables Keep yourself and
zero energy before and ignition sources others out of the
work begins line of fire
0

• I identify and control


• I have identified all ignition sources • I position myself to
energy sources • Before starting any hot work: avoid:
• I confirm that hazardous energy –– I confirm flammable material –– moving objects
sources have been isolated, locked, has been removed or isolated –– vehicles
and tagged –– I obtain authorisation –– pressure releases
• I have checked there is zero –– dropped objects
• Before starting hot work in a
energy and tested for residual hazardous area I confirm: • I establish and obey barriers and
or stored energy exclusion zones
–– a gas test has been completed
• I take action to secure loose objects
–– gas will be monitored continually
and report potential dropped objects

Safe Mechanical Lifting Work Authorisation Working at Height


Plan lifting Work with a valid Protect yourself
operations and permit when against a fall when
control the area required working at height
• I confirm that the • I have confirmed if • I inspect my fall
equipment and load a permit is required protection equipment
have been inspected and • I am authorised to perform before use
are fit for purpose the work • I secure tools and work materials
• I only operate equipment that I am • I understand the permit to prevent dropped objects
qualified to use • I have confirmed that hazards are • I tie off 100% to approved anchor
• I establish and obey barriers and controlled and it is safe to start points while outside a protected area
exclusion zones • I stop and reassess if conditions
• I never walk under a suspended load change

Вам также может понравиться