Академический Документы
Профессиональный Документы
Культура Документы
Project Summary
General Settings
Analysis Options
Bishop simplified
Janbu simplified
Number of slices: 25
Tolerance: 0.005
Maximum number of iterations: 50
Check malpha < 0.2 : Yes
Initial trial value of FS: 1
SteffensenIteration: Yes
Groundwater Analysis
GroundwaterMethod: WaterSurfaces
Pore Fluid Unit Weight: 9.81 kN/m3
AdvancedGroundwaterMethod: None
Random Numbers
Surface Options
SurfaceType: Circular
SearchMethod: Grid Search
Radius Increment: 10
Composite Surfaces: Disabled
ReverseCurvature: CreateTension Crack
Minimum Elevation: Not Defined
Minimum Depth: Not Defined
Loading
1 DistributedLoad present
Distributed Load 1
Distribution: Constant
Magnitude[kN/m2]: 50
Orientation: Normal to boundary
Material Properties
Global Minimums
ErrorCodes:
ErrorCodes:
ErrorCodes
-103 = Two surface/ slope intersections,but one or more surface/ nonslope externalpolygon intersectionslie between
them. This usually occurs when the slip surfaceextendspast the bottom of the soil region, but may also occur on a
benched slope model with two sets of Slope Limits.
-107 = Total driving moment or total driving forceis negative.This will occur if the wrong failuredirection is specified, or if
high externalor anchor loads areapplied againstthe failuredirection.
-108 = Total driving moment or total driving force< 0.1. This is to limit the calculation of extremelyhigh safetyfactorsif
the driving forceis verysmall (0.1 is an arbitrarynumber).
Slice Data
List Of Coordinates
Water Table
X Y
0 30
50 30
80 50
130 50
130 0
0 0
0 30
Line Load
X Y
130 50
80 50
50 30
0 30
ExternalBoundary
X Y
0 0
130 0
130 31.463
130 37.4744
130 50
80 50
50 30
0 30
0 20.986
0 14.9746
MaterialBoundary
X Y
0 14.9746
130 31.463
MaterialBoundary
X Y
0 20.986
130 37.4744