Академический Документы
Профессиональный Документы
Культура Документы
Key Words: Gravity load, Hostel, building.Etabs, Design. There are three philosophies for the design of reinforced
concrete namely:
1. INTRODUCTION
1) Working stress method
As our country is the fastest growing country across 2) Ultimate load method
the globe so the need of shelter for highly populated cities 3) Limit state method
where the cost of land is high and further horizontal
expansion is not possible due to unavailability of space, so 1.2 STAGES IN STRUCTURAL DESIGN
the only solution is vertical expansion. Structural design is
the primary aspect of civil engineering. The foremost basics The process of structural design involves the following
in structure is the design of simple basic components and stages
members of a building like slabs, beams, columns, and
footings. In order to design them it is important to first Structural planning.
obtain the plan of the particular building. Thereby Estimation of loads.
depending on the suitability plan layout of beams and the
© 2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 3504
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395 -0056
Volume: 04 Issue: 05 | May -2017 www.irjet.net p-ISSN: 2395-0072
2 OBJECTIVE
Following are the objectives
6. ANALYSIS RESULT
Mux
Sl. No. of Pu Muy
Column (KN-
No. Column (KN) (KN-m)
m)
© 2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 3505
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395 -0056
Volume: 04 Issue: 05 | May -2017 www.irjet.net p-ISSN: 2395-0072
© 2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 3506
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395 -0056
Volume: 04 Issue: 05 | May -2017 www.irjet.net p-ISSN: 2395-0072
© 2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 3507
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395 -0056
Volume: 04 Issue: 05 | May -2017 www.irjet.net p-ISSN: 2395-0072
© 2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 3508
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395 -0056
Volume: 04 Issue: 05 | May -2017 www.irjet.net p-ISSN: 2395-0072
BIOGRAPHIES
Rohit kumar.B.R.
Assistant Professor.
Department of Civil Engineering.,
Jain Institute of Technology.
Davanagere, Karnataka, India.
Sachin.P.Dyavappanavar.
Assistant Professor.
Department of Civil .
Engineering,
Jain Institute of Technology.
Davanagere, Karnataka, India.
Sushmitha.N.J.
U.G.Scholar.
Department of Civil Engineering,
Jain Institute of Technology.
Davanagere, Karnataka, India.
Sunitha.V.
U.G.Scholar
Department of Civil
Engineering,
Jain Institute of Technology.
Davanagere, Karnataka, India.
Vinayak.Yadwad
U.G.Scholar
Department of Civil
Engineering,
Jain Institute of Technology.
Davanagere, Karnataka, India
© 2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 3509