Вы находитесь на странице: 1из 11

Yousif Khalid Al-Adasani Est.

Plastic Pipes & Fittings Factory

HDPE PIPES & FITTINGS


‫‪Plastic Pipes & Fittings Factory‬‬ ‫م�صنع الأنابيب البال�ستيكية ولوازمها‬
‫‪Yousif Khalid Al-Adasani Ent.‬‬ ‫م�ؤ�س�سة يو�سف خالد العد�ساين‬

‫‪2‬‬
Plastic Pipes & Fittings Factory ‫م�صنع الأنابيب البال�ستيكية ولوازمها‬
Yousif Khalid Al-Adasani Ent. ‫م�ؤ�س�سة يو�سف خالد العد�ساين‬

High Density Polyethylene (HDPE) / HDPE Silent

Polyethylene is a thermoplastic composed of long chain of methylene (CH2 - CH2)


monomer.
HDPE possesses high chemical resistance and it is stabilized against UV rays
by the addition of carbon black. It has special properties, including acoustic
properties, that makes it suitable for drains and sewers applications.

Resistance to high and low temperatures :


Al-Adasani HDPE pipes and fittings can be used safely as a waste pipe up to 80˚C
and for cold water down to less than 0˚C.

Density :
The density of HDPE material is about 0.95 g/cm3 (HDPE silent density is
1.1 - 1.25 g/cm3 ),so it is light in weight and easy to transport and to install.

Resistance to UV rays :
Al-Adasani HDPE pipes and fittings are stabilized against UV rays.

Flexibility ;
Due to its flexibility, Al- Adasani HDPE pipes and fittings are suitable for buildings
and bridges exposed to vibration.

Resistance to Impact :
Al-Adasani HDPE pipes and fittings are very much resistant to impact at high and
very low temperatures.

Thermal Conductivity :
Thermal conductivity of Al-Adasani HDPE pipes and fittings is very low (about
0.41w/k.m).

Expansion and Contraction :


The mean coefficient of linear thermal expansion is about 0.175mm /m˚.C
( HDPE silent is about 0.1mm/m.ºc) which is relatively high, so special care to be
taken during installation.

Ease of Jointing :
Using butt and electrofusion welding techniques, for jointing, give complete
tightness for the joint without any risk of blocking.

3
Plastic Pipes & Fittings Factory ‫م�صنع الأنابيب البال�ستيكية ولوازمها‬
Yousif Khalid Al-Adasani Ent. ‫م�ؤ�س�سة يو�سف خالد العد�ساين‬

Protection against Blockage :


Due to the smooth surface of HDPE pipes, the flow of waste water is easy and
enables the system to be cleaned without blockage.

Table No.1

4
Plastic Pipes & Fittings Factory ‫م�صنع الأنابيب البال�ستيكية ولوازمها‬
Yousif Khalid Al-Adasani Ent. ‫م�ؤ�س�سة يو�سف خالد العد�ساين‬

High Density Polyethylene ( HDPE) Pipes & Fittings for sewage and drainage

1- HDPE pipes for sewage and drainage Inside buildings


As per DIN 8074 / 8075 , DIN 19535 and DIN EN / BS EN 1519

Wall thicness, s
Outside Diameter mm
O.D. (mm)
S 16 S 12.5
40 3.0 3.0
50 3.0 3.0
75 3.0 3.0
110 3.4 4.2
160 4.9 6.2
200 6.2 7.7
250 7.7 9.6
315 9.7 12.1

2- HDPE pipes for sewage and drainage underground.


As per DIN 8074 / 8075 , DIN 19537 and DIN EN / BS EN 12666

Wall thicness, s
Outside Diameter mm
O.D. (mm)
SDR 33 SDR 26 SDR 21

110 3.4 4.2 5.3


160 4.9 6.2 7.7
200 6.2 7.7 9.6
250 7.7 9.6 11.9
315 9.7 12.1 15
400 12.3 15.3 19.1

5
Plastic Pipes & Fittings Factory ‫م�صنع الأنابيب البال�ستيكية ولوازمها‬
Yousif Khalid Al-Adasani Ent. ‫م�ؤ�س�سة يو�سف خالد العد�ساين‬

Al-Adasani HDPE Silent Piping System

Al-Adasani HDPE silent pipes & fittings are manufactured specially to


improve the acoustic properties in sewage & drainage piping system
inside buildings.
Standards:
DIN 8074/8075, DIN EN 1519, DIN 4109

HDPE Silent Pipes / Fittings Properties

6
Plastic Pipes & Fittings Factory ‫م�صنع الأنابيب البال�ستيكية ولوازمها‬
Yousif Khalid Al-Adasani Ent. ‫م�ؤ�س�سة يو�سف خالد العد�ساين‬

HDPE & HDPE Silent Pipes Fittings

DIN 19535 / 19537, DIN EN / BS EN 1519 & 12666

7
‫‪Plastic Pipes & Fittings Factory‬‬ ‫م�صنع الأنابيب البال�ستيكية ولوازمها‬
‫‪Yousif Khalid Al-Adasani Ent.‬‬ ‫م�ؤ�س�سة يو�سف خالد العد�ساين‬

‫‪8‬‬
Plastic Pipes & Fittings Factory ‫م�صنع الأنابيب البال�ستيكية ولوازمها‬
Yousif Khalid Al-Adasani Ent. ‫م�ؤ�س�سة يو�سف خالد العد�ساين‬

SHORT REDUCERS
ECCENTRIC (RES)

d d1 X1 X2 H
mm mm mm mm mm

75 50 35 37 80
110 50 31 34 80
110 75 31 38 80
160 110 35 37 100

GULLY BODY (GB)

160x110x50mm

9
Plastic Pipes & Fittings Factory ‫م�صنع الأنابيب البال�ستيكية ولوازمها‬
Yousif Khalid Al-Adasani Ent. ‫م�ؤ�س�سة يو�سف خالد العد�ساين‬

GULLY BODY EXTENTION WITH RING & BRASS INSERT

A
H
E
F
B I
C C
G

Stainless steel blind cover Stainless steel grill cover

Gully body extention


H

Note: All other extention length


are available upon request
D

10
Yousif Khalid Al-Adasani Est.
‫ـــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ‬
Plastic Pipes & Fittings Factory
P.O. Box 1653, 13017 SAFAT, KUWAIT /
Sabhan Industrial Area Cable: YOUKADSAN
Telephone: 24743800 - 24743801 - 24730225 - 24730226 - 24714870
Fax: 24718258 - 24764115
Website: www.aladasani.com
Email: info@aladasani.com - sales@aladasani.com
11/2017

Вам также может понравиться