Академический Документы
Профессиональный Документы
Культура Документы
Pavers
Hydrostatic Sensor Pavers, Mechanical Pavers, Curb Pavers
Nové Město
nad Metují CZE
Alfeld GER
Hennef GER
Ettlingen GER
Langenthal SUI
Headquarters
Verona ITA
Shanghai CHN
Ahmedabad IND
Factories
Subsidiaries
True to our motto, “Productivity Partnership for a Lifetime,” we gear our activities to the needs and requirements
of our customers around the globe. We are aware that plants and machines that prove their merits day after day
under tough operating conditions are the only way to give our customers the critical, competitive edge they need.
As you would expect, we provide a well-developed service network and reliable supply of spare parts, together
with support throughout the lifetimes of the plants and machines that we offer.
2
Ammann Apollo India Private Limited –
a member of Ammann Group
Apollo has been the market leader for asphalt mixing plants and asphalt pavers in India
for more than 30 years. A total of 500 + employees at three plants in the Gujarat province
produce plant and machinery for Apollo’s main market India and other emerging markets.
Additionally, Apollo also has a broad network of sales and service points throughout India.
3
Hydrostatic Sensor Paver Finishers
For Asphalt and Wet Mix Paving
4
“Over 1850 units
in operation.”
Hydrostatic Controls
• Conveyor and augur drive is through variable displacement hydraulic pump and fixed motor for material feed.
Proportional hydraulic feeding system for step-less feeding control is an optional extra.
• The steering and transmission are hydraulically controlled.
6
Technical Specifications AP 550
Tractor model AP 550
Operating height A 3,43 m
Shipping height A1 2,52 m
Hight wo canopy A1 2,52 m
Length B 6,61 m
Operating width C 3,14 m
Shipping width D 2,54 m
Tread width E 2,08 m
Truck dumping clearance F 485 mm
Wheel base G 2,61 m
Prime Mover
Engine * Kirloskar / ashok leyland or equivalent
Engine power 92 kw @ 2300 rpm
Type of engine starting, including rating of starter 12 VDC
Type of cooling Water cooled
Capacity
Fuel tank capacity 132 Ltr
Hydraulic tank capacity 190 Ltr
Performance
Weight 14 840 kg
Tyre front solid 4 nos. 22 × 16 × 12
Tyre rear pneumatic 4 nos. 10,00 × 20
Turning radius inner 5,5 m
Laying capacity 300 TPH
Paving thickness 10–300 mm
Paving speed m / min 0–40
Travel speed (second) Km / hr 0–15
Hopper capacity (approx.) 10 t
Feeders
Auger Highly wear resisting steel casting dia. 355 mm 20 mm thickness
Feed tunnel width 590 mm
Conveyor floor plate Wear resisting steel 12 mm
Feed / auger control system 2 nos. on / off type
Auger lowest position from ground 150 mm
Auger and conveyor drive Syncronised
Screed
Screed basic width 2,50 m
Infinite variable extension 2,50 to 4,50 m
With bolt on extension max 5,75 m
Screed weight main 2890 kg
Bolt on extension weight 625 mm 210 kg
Crown -1 to + 4,5 %
Gradient slope 10 % gradient slope
Screed vibration 30–50 Hz
Tamping (5 mm stroke) 18–27 Hz
Screed plate 320 mm × 12 mm wear resistant
Screed heaters 4 nos. diesel / propane optional
Controls
Operating station Dual station
Brake Kaliper disc brake
Sensor for grade and slope control Moba controls
Sensor Device
Grade and slope control Moba controls
Power output On/off type
Grade control measuring range (+/-) 70 mm
Obtainable accuracy for grade (+/-) 1 mm
Slope control measuring range (+/-) 10 %
Obtainable accuracy for slope (+/-) 0,05 %
Enclosure protection IP54
Safety devices In built pressure relief valves
Make / type of pumps and motors Sauer danfoss or equivalent
* Suitable engine for specific export market may be offered.
Maximum performances can not be obtained simultaneously.
With Apollo’s policy of constant upgrdation of products, specifications are subject to change without prior notice.
Accessories shown are optional and are not part of the standard supply.
“Over 155 units in operation.”
Hydrostacic Sensor Paver Finisher – AP 600 on Wet Mix Paving. Hydrostacic Sensor Paver Finisher – AP 600 on Asphalt Paving.
Hydrostatic Controls
• Independent Drives for conveyor and augurs.
• 2 Nos of on – off type controls for feed.
• 2 Nos of proportional controls for augur.
• The steering and transmission are hydraulically controlled.
• A2 Height without canop 2556 • D Shipping width 2540 • G Wheel base 2612
8
Technical Specifications AP 600
Tractor Model AP 600
Operating height A 3,28 m
Shipping height A1 2,72 m
Hight wo canopy A2 2,55 m
Length B 6,73 m
Operating width C 3,14 m
Shipping width D 2,54 m
Tread width E 2,08 m
Truck dumping clearance F 485 mm
Wheel base G 2,61 m
Prime Mover
Engine * Kirloskar/ashok leyland or equivalent
Engine power 92 kw @ 2300 rpm
Type of engine starting, including rating of starter 12 VDC
Type of cooling Water cooled
Capacity
Fuel tank capacity 132 Ltr
Hydraulic tank capacity 190 Ltr
Performance
Weight 16 400 kg
Tyre front solid 4 nos. 22 × 16 × 12
Tyre rear pneumatic 4 nos. 10,00 × 20
Turning radius inner 6,5 m
Laying capacity 300 TPH
Paving thickness 10–300 mm
Paving speed m / min 0–40
Travel speed (second) Km / hr 0–15
Hopper capacity (approx.) 10 t
Feeders
Auger Highly wear resisting steel casting dia. 355 mm 20 mm thickness
Feed tunnel width 620 mm
Conveyor floor plate Wear resisting steel 12 mm
Feed control system 2 nos. sonic on / off type
Auger control system 2 nos. sonic proportional type
Auger lowest position from ground 110 mm
Auger height adjustment 105 mm
Auger and conveyor drive Independent
Screed
Screed basic width 2,50 m
Infinite variable extension 2,50 to 4,50 m
With bolt on extension max 6m
Screed weight main 2890 kg
Bolt on extension weight 625 mm 230 kg
Crown -1 to + 4,5 %
Gradient slope 10 % gradient slope
Screed vibration 30–50 Hz
Tamping (5 mm stroke) 18–27 Hz
Screed plate 350 mm × 12 mm wear resistant
Screed heaters 4 nos. diesel / propane optional
Controls
Operating station Dual station
Brake Kaliper disc brake
Sensor for grade and slope control Moba controls
Sensor Device
Grade and slope control Moba controls
Power output On / off type
Grade control measuring range (+/-) 70 mm
Obtainable accuracy for grade (+/-) 1 mm
Slope control measuring range (+/-) 10 %
Obtainable accuracy for slope (+/-) 0,05 %
Enclosure protection IP54
Safety devices In built pressure relief valves
Make / type of pumps and motors Sauer danfoss or equivalent
* Suitable engine for specific export market may be offered.
Maximum performances can not be obtained simultaneously.
With Apollo’s policy of constant upgrdation of products, specifications are subject to change without prior notice.
Accessories shown are optional and are not part of the standard supply.
Hydrostacic Sensor Paver Finisher – AP 1000
AP1000 is offered with 2 screed variants
Hydrostatic Screed
• Has a basic screed width of 3 metres hydraulically extendable to 5,56 metres. Bolt on mechanical
extensions offered on either side of the screed to facilitate paving width of 9 metres. The tamping and
vibration arrangement is in line with Ministry of Road Transport & Highways (MORT & H), Govt. of India
and accepted international specifications.
Fixed Screed
• Extendable up to 9 metres.
• Uniform screed heating across the screed width is with LPG heating.
10
Hydrostatic Controls
• Variable displacement pump with servo control – one each for individual track drive.
• 2 units of variable displacement pump with servo control for independent feeder drive.
• Fixed displacement pump for vibrator / tamper circuit with flow control valves for frequency adjustment.
• Centralized pressure line filters for long life and less frequent replacements
• Remote controlled solenoid with function check LED to assist system diagnosis
• The steering and transmission are hydraulically controlled.
Track
The crawler mounted track has three points suspension for smooth driving. The 457 mm wide replaceable
track pad against the normal 352 mm wide pad, provides higher traction force and life span.
Benefits at a glance
• Independent drive for conveyor and augur for better operation, longer life and less maintenance.
• Independent direct hydraulic transmission drive in each track.
• Long life heavy duty alloy steel slat conveyor.
• Larger hopper capacity of 5,5 Cu.m.
• 457 mm Wide Track Pads for higher life and wide paving.
• 3 Points suspension track for smooth riding.
• Cam lock, swinging type operating console for a quick changing over from LH to RH and vice versa.
11
12
Technical Specifications AP 1000
Tractor Model AP 1000 with fixed screed AP 1000 with extend-a-pave screed
Operating height A 3,43 m
Height with tiltable canopy A1 2,73 m
Shipping height wo canopy A2 2,72 m
Length B 6,69 m
Operating Width C 3,16 m
Shipping width D 3,04 m
Truck dumping clearance E 0,57 m
Frame 16 mm plate thickness
Prime Mover
Engine * Kirloskar or equivalent
Engine power 124,3 kw @ 2300 rpm
Type of engine starting, including rating of starter 12 VDC
Type of cooling Water cooled
Track
Track rail D4
Suspension Three point
Track shoe width 457 mm (18")
Track shoe Bolt on type
Track roller Single and double flange type
Track drive Direct w / o Chain
Capacity
Fuel tank capacity 172 Ltr
Hydraulic tank capacity 210 Ltr
Performance
Weight 22 800 kg
Turning radius outer 3m
Laying capacity 700 TPH
Paving thickness 10–305 mm
Paving speed m / min 0–41
Travel speed (second) Km / hr 0–7,5
Hopper capacity (approx.) 11 t
Feeders
Auger Highly wear resisting steel casting dia. 407 mm 22 mm thickness
Feed tunnel Width 762 mm
Conveyor floor plate Wear resisting steel 12 mm
Feed control system 2 nos. on / off type
Auger control system 2 nos. proportional type
Auger lowest position from ground 130 mm
Auger height adjustment 105 mm
Auger and conveyor drive Independent
Screed
Screed basic width 3m 3m
Max width with bolt on extension 9m
Infinite variable extension 3 to 5,56 m
With bolt on extension max 9m
Screed weight basic 2640 kg 4040 kg
Screed weight 9 m 6390 kg
Bolt on extension weight 1500 mm eachx2 800 kg
Bolt on extension weight 1000 mm eachx2 595 kg 290 kg
Bolt on extension weight 500 mm eachx2 240 kg
Bolt on extension weight 250 mm eachx4 120 kg
Crown -1 to + 4,5 % -1 to + 4,5 %
Gradient slope 10 % Gradient Slope 10 % Gradient Slope
Screed vibration 0–30 Hz 30–50 Hz
Tamping (8 / 6 mm stroke) 0–10 Hz × 2 18–27 Hz (5 mm stroke)
Screed plate 500 mm × 15 mm wear resistant 400 mm × 12 mm wear resistant
Screed heaters 18 nos. propane 8 nos. propane / diesel optional
Controls
Operating station Dual station (swing type)
Brake Negative multidisc
Sensor Device
Grade and slope control Moba controls
Power output On/off type
Grade control measuring range (+/-) 70 mm
Obtainable accuracy for grade (+/-) 1 mm
Slope control measuring range (+/-) 10 %
Obtainable accuracy for slope (+/-) 0,05 %
Enclosure protection IP54
Safety devices In built pressure relief valves
Make / type of pumps and motors Sauer danfoss or equivalent
Over 3300 pavers are in operation in India and abroad and 40–50 units are delivered
each month – manifestation of the customer confidence on the proven technology.
14
“Over 2400 units
in operation.”
15
Curb Paver
16
“Over 150 units in operation.”
KP 1200 SF is integrated with a host of features for enhanced productivity and wide range of applications. The machine is with
a heavy duty field proven engine, world class hydraulics and control system. Over 150 units are in operation in India and abroad.
Easy maneuverability
Engine The ergonomic design of KP 1200 SF offers the operator easy
27 KW (36 HP) Yanmar water cooled diesel engine, accessibility to machine component, high visibility of curb
ideal for this application. forming with controls at finger tips. Adjustments for speed
and vibrations are easily verified as the formed concrete is
right by the side of the operator.
17
C
D
Needle vibrators. Automatic electronic controls.
A
KP
C
HE
G1
G
LEN
WID
TR
D
CE
TR
TR
TR
TO
E
B F
LENGTH - B - 3750
WIDTH - C- 2275
TREAD WIDTH CENTRE - D - 1275
CENTRE SOLID TYRE - E - 590
TRACK & WHEEL BASE - F - 2075
TRACK MAX. DOWN - G - 1400
TRACK MAX. UP - G1 - 1700
TOTAL WEIGHT - 3850
E
F
18
Technical Specifications KP 40
Engine 16 HP Petrol Engine
Width 1150 mm
Length (w/o Mould) 1920 mm
Lenth (with Mould) 2700 mm
Height 1010 mm
Weight with Mould 900 kg
Steering Control Auto / manual
Height Control Auto / manual
Turning Radius 2,4 m
Accuracy + / - 3–5 mm
Compaction Method Ramming
Moulds Bolt on MS moulds to specifications. Max. of 400 mm of height and width. *
Accessories String line and holders, finishing tools, Cutting tools.
19
Ammann Apollo India Private Limited
Ammann Apollo House, Near Mithakhali Circle
Navrangpura, Ahmedabad - 380 009, India
Phone: + 91-79-2656 3730 / 6618 8888
Fax: + 91-79-2656 4705
info.ain@ammann-group.com
www.ammann-apollo.com