Академический Документы
Профессиональный Документы
Культура Документы
PIGTAILS
Design & Material Data: Design & Material Data: • Braid consists of inner layer with type
• Core consists of high pressure, reinforced 304 SS stainless steel, two layers of
• Core consists of Teflon Teflon (polytetrafluoroethylene) hose
(polytetrafluoroethylene) with two stainless steel spiral wrap, plus an
(Teflon is inert to most chemicals and outer braid of stainless steel
outer reinforcing jackets of stainless solvents, except molten alkali metals
steel braid (Teflon is inert to most and fluorine at elevated temperatures • Burst pressure rating at room temperature:
chemicals and solvents, except 24,000 PSIG (see note below)
and pressures)
molten alkali metals and fluorine at • Type 316 stainless steel used for
elevated temperatures and • Teflon fluid and ambient temperature primary tube fittings with swaged
pressures) range: -65°F (–54 C) through design
+450°F (232°C)
• 1/4" nominal I.D. • Most CGA cylinder connections
• 1/4" nominal I.D. machined of stainless steel to
• Braid consists of Type 304 full hard specifications for applicable gases
drawn stainless steel wire • .229" Minimum I.D.
.495" Maximum O.D. • Minimum bend radius of 3" provides
• Teflon withstands temperatures for maximum life and safe
from –65°F (–54C) through • Conductive; extruded Teflon dissipates performance
+450°F (232C) static charges
• All pigtails100% tested and labeled
• Burst pressure rating at room for gas service and pressure rating
temperature: 12,000 PSIG
Notes:
• Burst pressure ratings for pigtails Model P - 3000 PSIG (20,700kPa),....Rigid Copper Pigtail
Model PB - 3000 PSIG (20,700kPa),....Rigid Brass Pigtail
are determined at room temperature Model PS - 6000 PSIG (41,300kPa),....Rigid Stainless Steel Pigtail
with the hose in a straight line. A Model PF - 3000 PSIG (20,700kPa),....Flexible Teflon-Lined Pigtail
safety factor of 4:1 or 5:1 should be Model PFS - 3000 PSIG (20,700kPa),....Flexible Nylon-Lined Pigtail
used for normal applications. Model PF6 - 6000 PSIG (41,300kPa),....Flexible Teflon-Lined Pigtail
Impulse and shock pressure
applications may require a higher
safety factor. *Use with 3/8” OD Flash Arrestor option.
www.diverscosupply.com
46
SPECIAL ORDER
PIGTAILS
All Styles All Styles All Styles Rigid Tube Rigid Tube Bends
CGA No. + N= Blank =Brass Blank (None) 27 = 27 inches COIL Standard on 48+”
CGA Nut/Nipple PL =Plated CV =Check Valve 36 = 36 inches DBL Two 3” Loops
Example: 540 N SS =St. Steel FA =Flash Arrestor* 48 = 48 inches Standard on 27” P, PB
CGA No. + B = HTP =Hand Tight N/N with Plastic Grip SGL 6” Loop Standard, 36”
CGA VO or Body HTB =Hand Tight N/N with Brass H/T Nut Flex Hose P, PB, PS
Example: 540 N GA =Gauge Lengths in 6” SPCL Special Bend, Print
Fraction + M or F = PH =Brass Handle Increments: Required
ANSI Pipe Thread VA =Shutoff Valve 12”minimum
Example: 1/4F EL =90° Elbow 18”minimum- Flex Hose Only
Spring Guard B =Spring Guard
300”maximum B1 =Spring Guard
w/Swivel Inlet
Example: B2 =Spring Guard
12 = 12” w/Swivel Outlet
(Note: Lengths B1.2 =Spring Guard
do not include w/Swivel, Both Ends
connections)
Use the chart above to develop specifications for Special Order Pigtails.
P-15-PCV
www.diverscosupply.com
50
FLEXIBLE
PIGTAILS
Stainless Steel
See page 46 for Connections
hose specifications