Академический Документы
Профессиональный Документы
Культура Документы
RUJUKAN
ASTM 2015. Standard Specification for Coal Fly Ash and Raw or Calcinated Natural
Pozzolan for Use in Concrete. West Conshohocken, PA, ASTM International.
C618-15.
Azeez, A. A., K. Y. Rhee, S. J. Park & D. Hui 2013. Epoxy clay nanocomposites –
processing, properties and applications: A review. Composites Part B:
Engineering 45(1): 308-320.
Bada, S. & S. Potgieter-Vermaak 2008. Evaluation and Treatment of Coal Fly Ash for
Adsorption Application. Leonardo Electronic Journal of Practices and
Technologies 7(12): 37-48.
Baspinar, M. S., E. Kahraman, G. Gorhan & I. Demir 2010. Production of fired
construction brick from high sulfate-containing fly ash with boric acid addition.
Waste Manag Res 28(1): 4-10.
Basu, M., M. Pande, P. B. S. Bhadoria & S. C. Mahapatra 2009. Potential fly-ash
utilization in agriculture: A global review. Progress in Natural Science 19(10):
1173-1186.
Batista, N. L., M. C. Rezende & E. C. Botelho 2018. Effect of crystallinity on CF/PPS
performance under weather exposure: Moisture, salt fog and UV radiation.
Polymer Degradation and Stability.
Bell, D. A., B. F. Towler & M. Fan. 2011. The Nature of Coal. Dlm. (pnyt.). Ed.
Coal Gasification and its Applications pp. 9. Elsevier.
Bell, D. A., B. F. Towler & M. Fan. 2011. Non-gasification Uses of Coal. Dlm.
(pnyt.). Ed. Coal Gasification and its Applications pp. 20. Elsevier.
Biricik, H. & N. Sarier 2014. Comparative study of the characteristics of nano silica - ,
silica fume - and fly ash - incorporated cement mortars. Materials Research 17:
570-582.
Brostow, W., S. H. Goodman & J. Wahrmund. 2014. Epoxies. Dlm. (pnyt.). Ed.
Handbook of Thermoset Plastics (Third Edition) pp. 191-252. Boston:
William Andrew Publishing.
Cardinal, S., J. M. Pelletier, M. Eisenbart & U. E. Klotz 2016. Influence of
crystallinity on thermo-process ability and mechanical properties in a Au-
based bulk metallic glass. Materials Science and Engineering: A 660: 158-165.
Chaichanawong, J., C. Thongchuea & S. Areerat 2016. Effect of moisture on the
mechanical properties of glass fiber reinforced polyamide composites.
Advanced Powder Technology 27(3): 898-902.
Chaowasakoo, T. & N. Sombatsompop 2007. Mechanical and morphological
properties of fly ash/epoxy composites using conventional thermal and
microwave curing methods. Composites Science and Technology 67(11):
2282-2291.
Chen, R., Y. Li, R. Xiang & S. Li 2016. Effect of particle size of fly ash on the
properties of lightweight insulation materials. Construction and Building
Materials 123: 120-126.
Cheng, Y., M. Xia, F. Luo, N. Li, C. Guo & C. Wei 2016. Effect of surface
modification on physical properties of silica aerogels derived from fly ash acid
sludge. Colloids and Surfaces A: Physicochemical and Engineering Aspects
490(Supplement C): 200-206.
Ciullo, P. A. 1996. Adhesives and Sealants. Dlm. P. A. Ciullo (pnyt.). Ed. Industrial
Minerals and Their Uses - A Handbook and Formulary pp. 318-319. William
Andrew Publishing/Noyes.
110
Ciullo, P. A. 1996. Paints and Coatings. Dlm. P. A. Ciullo (pnyt.). Ed. Industrial
Minerals and Their Uses - A Handbook and Formulary pp. 121-123. William
Andrew Publishing/Noyes.
Colombo, A., M. Geiker, H. Justnes, R. A. Lauten & K. De Weerdt 2018. The effect
of calcium lignosulfonate on ettringite formation in cement paste. Cement and
Concrete Research 107: 188-205.
Cravo, J. C. M., D. de Lucca Sartori, G. Mármol, G. M. Schmidt, J. C. de Carvalho
Balieiro & J. Fiorelli 2017. Effect of density and resin on the mechanical,
physical and thermal performance of particleboards based on cement
packaging. Construction and Building Materials 151: 414-421.
Czub, P. 2009. Synthesis of high-molecular-weight epoxy resins from modified
natural oils and Bisphenol A or BisphenolA-based epoxy resins. Polymers for
Advanced Technologies 20(3): 194-208.
Danner, T., H. Justnes, M. Geiker & R. A. Lauten 2016. Early hydration of C3A–
gypsum pastes with Ca- and Na-lignosulfonate. Cement and Concrete
Research 79: 333-343.
Dayananda, N. & B. S. Keerthi Gowda 2017. Prediction of properties of fly ash and
cement mixed GBFS compressed bricks. Materials Today: Proceedings 4(8):
7573-7578.
Dhakal, H. N., Z. Y. Zhang & M. O. W. Richardson 2007. Effect of water absorption
on the mechanical properties of hemp fibre reinforced unsaturated polyester
composites. Composites Science and Technology 67(7): 1674-1683.
El-Kady, O. & A. Fathy 2014. Effect of SiC particle size on the physical and
mechanical properties of extruded Al matrix nanocomposites. Materials &
Design (1980-2015) 54: 348-353.
Ellis, B. 1993. Introduction to the chemistry, synthesis, manufacture and
characterization of epoxy resins. Dlm. B. Ellis (pnyt.). Ed. Chemistry and
Technology of Epoxy Resins pp. 1-36. Dordrecht: Springer Netherlands.
Ennouri, H., B. Miladi, S. Z. Diaz, L. A. F. Güelfo, R. Solera, M. Hamdi & H.
Bouallagui 2016. Effect of thermal pretreatment on the biogas production and
microbial communities balance during anaerobic digestion of urban and
industrial waste activated sludge. Bioresource Technology 214(Supplement C):
184-191.
Fan, F., Z. Liu, G. Xu, H. Peng & C. S. Cai 2018. Mechanical and thermal properties
of fly ash based geopolymers. Construction and Building Materials 160: 66-81.
Fan, M., J. Liu, X. Li, J. Cheng & J. Zhang 2013. Curing behaviors and properties of
an extrinsic toughened epoxy/anhydride system and an intrinsic toughened
epoxy/anhydride system. Thermochimica Acta 554(Supplement C): 39-47.
Fan, X. J., S. W. R. Lee & Q. Han 2009. Experimental investigations and model study
of moisture behaviors in polymeric materials. Microelectronics Reliability
49(8): 861-871.
Ferdosian, F., M. Ebrahimi & A. Jannesari 2013. Curing kinetics of solid
epoxy/DDM/nanoclay: Isoconversional models versus fitting model.
Thermochimica Acta 568(Supplement C): 67-73.
Fink, J. K. 2013. Epoxy Resins. Dlm. (pnyt.). Ed. Reactive Polymers Fundamentals
and Applications (Second Edition) pp. 95-153. Oxford: William Andrew
Publishing.
Foix, D., M. T. Rodríguez, F. Ferrando, X. Ramis & A. Serra 2012. Combined use of
sepiolite and a hyperbranched polyester in the modification of
111
Yaumi, A. L., I. A. Hussien & R. A. Shawabkeh 2013. Surface modification of oil fly
ash and its application in selective capturing of carbon dioxide. Applied
Surface Science 266(Supplement C): 118-125.
Yoo, M. J., S. H. Kim, S. D. Park, W. S. Lee, J.-W. Sun, J.-H. Choi & S. Nahm 2010.
Investigation of curing kinetics of various cycloaliphatic epoxy resins using
dynamic thermal analysis. European Polymer Journal 46(5): 1158-1162.
Yoon, S., S. Kang, Y. Choi, H. Choi & S.-J. Lee 2016. Effect of relative density on
microstructure and mechanical properties of Fe-12Mn-0.2C alloy fabricated by
powder metallurgy. Powder Technology 298: 106-111.
Youcai, Z. 2017. Engineering Design for Fly Ash Solidification and Stabilization.
Dlm. (pnyt.). Ed. Pollution Control and Resource Recovery: Municipal Solid
Wastes Incineration pp. 287-331. Butterworth-Heinemann.
Youcai, Z. 2017. Utilization of Fly Ash in Ceramic Brickmaking. Dlm. (pnyt.). Ed.
Pollution Control and Resource Recovery: Municipal Solid Wastes
Incineration pp. 213-255. Butterworth-Heinemann.
Yu, J., X. Li, D. Fleming, Z. Meng, D. Wang & A. Tahmasebi 2012. Analysis on
Characteristics of Fly Ash from Coal Fired Power Stations. Energy Procedia
17(Part A): 3-9.
Zhang, S., Y.-R. Lee, J.-W. Ahn & W.-S. Ahn 2018. Sodium silicate insulating foam
reinforced with acid-treated fly ash. Materials Letters 218: 56-59.
Zhang, Y., Z. Zhang, Z. Liu, P. Norris & W.-p. Pan 2017. Study on the mercury
captured by mechanochemical and bromide surface modification of coal fly
ash. Fuel 200(Supplement C): 427-434.
Zhang, Z., B. Wang & Q. Sun 2014. Fly Ash-derived Solid Amine Sorbents for CO2
Capture from Flue Gas. Energy Procedia 63(Supplement C): 2367-2373.
Zheng, Y. J., A. D. Jensen, C. Windelin & F. Jensen 2012. Review of technologies for
mercury removal from flue gas from cement production processes. Progress in
Energy and Combustion Science 38(5): 599-629.
Zhou, X., M. Zhou, X. Wu, Y. Han, J. Geng, T. Wang, S. Wan & H. Hou 2017.
Reductive solidification/stabilization of chromate in municipal solid waste
incineration fly ash by ascorbic acid and blast furnace slag. Chemosphere 182:
76-84.
Zhuang, X. Y., L. Chen, S. Komarneni, C. H. Zhou, D. S. Tong, H. M. Yang, W. H.
Yu & H. Wang 2016. Fly ash-based geopolymer: clean production, properties
and applications. Journal of Cleaner Production 125(Supplement C): 253-267.
Ziolkowski, M. & M. Kovtun 2017. Confined-Direct Electric Curing of NaOH-
activated fly ash based brick mixtures under free drainage conditions: Part 1.
Factorial experimental design. Construction and Building Materials
155(Supplement C): 1050-1062