Академический Документы
Профессиональный Документы
Культура Документы
Despande
2. S Sengupta
1. Develpoment of novel catalyst for desulfurisation of fuels by cryochemical technique
2. Pervaporative desulfurisation of model fuel
3. Application of polymer-embedded nano catalysts in fine chemical synthesis
3. J Chakraborty
1. Solar cell fabrication
2. Flocculation process for wastewater treatment.
3. Polymer nanocomposites.
4. Sudipto Chakraborty
1. Synthesis of graphene oxide and its application in heat transfer.
2. Biomedical applications of graphene and graphene oxide.
3. CFD simulation of droplet dynamics and vortex ring formation (Pre-requisite: CFD course
at PG Level)
5. G Das
1.Bubble behavior in non Newtonian vis a vis Newtonian liquids
2.Bubble dynamics in oscillating systems (Analysis and numerical study)
6. Swati Neogi
1. Composite performance analysis using ABAQUS/ANSYS
2.Development of SMART Composites using strain sensors
3. Rheological behaviour of engineered fluids
7. B C Meikap
1. Synthesis of Valuable products from Coal tar ( Student need to carry out part of the Project
at Tata Steel, Jamshedpur)
2. Removal of CO2 in Multi-Stage Fluidized Bed Reactor by Suitable Adsorbent.
3. Control of air pollutants in a Venturi Scrubber
8. Saikat Chakraborty
1. Catalytic Conversion of Lignicellulose to Biofuels: experiments
2. Enzymatic Hydrolysis of Lignicellulose for Bioethanol production: experiments and
kinetic analysis
3. Scale-up and Optimization of Algal Photobioreactors for Biodiesel production:
experiments and modelling (jointly with Professor Gargi Das)
9. S Neogi
1. Waste water Engineering I
2. Nanomaterials: synthesis, characterization and application for Biological application.
3. Project lll ( Undefined)
10. J K Basu
11. S De
1. Conductive membranes for water treatment (Experimental & theoretical).
2. CFD analysis for mass transfer through micro-scale conduits (Experimental & theoretical)
3. Treatment of hydrofracked water (Experimental & theoretical) (with co-supervisor Prof.
Sudarsan Neogi).
12. A N Samanta
1. CO2 capture by adsorption using new materials: Experimental study
2. CO2 capture using blended amines : Experimental study
3. Removal of Heavy metals from waste water
4. Molecular Dynamic Simulation of CO2 adsorption
13. D Sarkar
1. Particle engineering by Crystallization - 1
2. Particle engineering by crystallization - 2
3. Multi-objective optimization
14. G Kundu
1. Studies on heat transfer in a downflow bubble column.
2. Studies on mixing characteristics in a downflow bubble column.
3. Studies on rheological behavior of multiphase system.
15. S Ganguly
1. Electrochemical Capacitor
2. Compression studies on gel material
3. Geochemical leaching
16. G. Harikrishnan
1. A surface evolver based simulation of nanoparticle induced drainage in aqueous foams
2. Coarse-grained molecular dynamics simulation of anti-Arrhenian temperature-viscosity
behaviour in polymer-clay suspensions
3. A rheological model for polymer thin film lithography ((jointly with Prof. R. Mukherjee)
17. S Dasgupta
18. R Mukherjee
1. Morphology Control in Thin Block Co-Polymer Thin Films for Anti Reflection Coatings.
2. Nano Particle Induced stable Ultra Thin Polymer coatings
3. Electro Wetting on Wrinkled Surfaces ((jointly with Prof. S Dasgupta)
19. A K Jana
1. Solar refinery to convert carbon dioxide and water into fuel
2. Carbon dioxide sequestration through gas hydrate technology
3. Improving energy efficiency of batch distillation
20. S Ray
1. Travel and coalescence of a heavy liquid drop in a stratified liquid-liquid system -
experimental and simulation study.
2. Flooding in gravity draining of liquids in narrow conduits.
21. A Atta
1. Modeling of flotation cell (in collaboration with Tata Steel R&D, Jamshedpur)
2. Microfluidics and CFD
3. CFD and multiphase systems
22. N C Pradhan
1. Project I
2. Project II
3. Project III