Академический Документы
Профессиональный Документы
Культура Документы
Two identical FETs, each characterized by the parameters gm and rd are connected in
parallel. The composite FET is then characterized by the parameters
(a)gm/2 and 2rd (b) gm/2 and rd/2 (c) 2gm and rd/2 (d) 2gm and 2rd
Q2. An n-channel JFET has a pinch- off voltage of VP=-5V, VDS(max)=20 V and gm=2 mA/V.
The minimum “ON” resistance is achieved in the JFET for
(a)VGS=-7 V and VDS=0 V (b) VGS=0 V and VDS=0 V (c) VGS=0 V and VDS=20 V (d) VGS=-7 V
and VDS=20 V
Q3. An n-channel JFET, having a pinch off voltage Vp of -5 V shows a transconductance (gm) of
1 mA/V when the applied gate to source voltage (VGS) is -3 V. Its maximum transconductance
(in mA/V) is
Q4. In the circuit of figure, the 5 V zener diode requires a minimum current of 10mA. For
obtaining a regulated output of 5 V, the maximum permissible load current IL is ----------------
mA and the minimum power rating of zener diode is ………………….W.
Q5. Assuming the OPAMP t0 be ideal one, Find out the gain of the circuits shown below