Академический Документы
Профессиональный Документы
Культура Документы
®
HI-IMPULSE Double Wire Braid
SPECIALTY &
TRUCK HOSE
Meets or exceeds:
SAE 100R2A, EN 853 2ST, ISO 1436-1 Type 2ST
r
Maximum Minimum
Operating Burst Bend
PRESSURE HOSE
LOW & MEDIUM
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Weight
mm in mm in bar psi bar psi mm in Kg/m lbs/ft
400,0 5800† 1600,0 23200†
2781-4 6,4 0.25 17,5 0.69 345,0 5000 1380,0 20000 101,6 4.00 0,50 0.33
345,0 5000† 1380,0 20000†
2781-6 9,7 0.38 21,3 0.84 280,0 4000 1120,0 16000 127,0 5.00 0,67 0.45
295,0 4300† 1180,0 17200†
2781-8 12,7 0.50 24,6 0.97 241,0 3500 964,0 14000 177,8 7.00 0,83 0.56
HOSE FITTINGS
90,0 1300† 360,0 5200†
2781-32 50,8 2.00 69,9 2.75 78,0 1125 312,0 4500 635,0 25.00 4,02 2.70
Construction Application For Complete Agency Listings Fitting Reference Page
Synthetic rubber tube, double Hydraulic system service with See pages 346-348. Crimp
wire braid reinforcement and petroleum and water-base fluids, Skive Nipple 66
DURA-TUFF synthetic rubber for general industrial service. For Socket Data 64
cover. more information on specific fluid †Improved pressure perfor-
applications and high temperature mance when used with global Reusable
Operating Temperature Range Fitting 156
ratings, see pages 349-355. fittings.
–40°C to +100°C [–40°F to +212°F]
TUBE FITTINGS
Socket Data 65
ADAPTERS &
GH781
MATCHMATE Global™
Double Wire Braid
Meets or exceeds: Triple Crown Advantage
ASSEMBLY INSTRUCTIONS
• Pressure
SAE 100R16 Type S, EN857 2SC, ISO 11237-1 Type 2SC • Temperature
• Abrasion Resistance
ACCESSORIES &
r
Maximum Minimum
Operating Burst Bend
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Weight
mm in mm in bar psi bar psi mm in Kg/m lbs/ft
GH781-4 6,4 0.25 13,5 0.53 448,0 6500 1792,0 26000 50,8 2.00 0,33 0.22
HOSE ASSEMBLY
GH781-6 9,7 0.38 17,5 0.69 366,0 5300 1464,0 21200 63,5 2.50 0,43 0.29
GH781-8 12,7 0.50 20,6 0.81 310,0 4500 1240,0 18000 88,9 3.50 0,58 0.39
EQUIPMENT
GH781-10 16,0 0.63 23,6 0.93 276,0 4000 1104,0 16000 101,6 4.00 0,65 0.44
GH781-12 19,1 0.75 27,9 1.10 241,0 3500 964,0 14000 120,7 4.75 0,79 0.53
GH781-16 25,4 1.00 36,1 1.42 207,0 3000 828,0 12000 152,4 6.00 1,07 0.72
GH781-20 31,8 1.25 41,9 1.65 172,0 2500 688,0 10000 209,6 8.25 1,62 1.09
GH781-24 38,1 1.50 51,6 2.03 138,0 2000 552,0 8000 254,0 10.00 2,08 1.40
GH781-32 50,8 2.00 64,3 2.53 110,0 1600 440,0 6400 317,5 12.50 2,83 1.90
APPENDICIES
SPECIALTY &
TRUCK HOSE
PRESSURE HOSE
LOW & MEDIUM
1 2 3 4
Global Nipples for use with Global OTC Fittings for use with Global TTC Fittings for use Global TTC12 Fittings for use
Hose: Clamp: 2661 (–12 thru –20), Hose: 2583, 2661, FC466, FC498, with Hose: 2661(–12 thru –32), with Hose: FC636, FC736,
FC619 (–12 thru –20). Socket FC598, FC619, FC699 FC310, FC510, FC579, FC611, GH493, EC525.
1SA: 2681, FC310, FC510, FC639/ FC619 (–12 thru –32), FC639/
FC839B (–4 thru –8), GH194 FC839B, FC693, FC735, FC849/
(–4 thru –20), GH663, GH681. FC849B, GH120, GH194, GH195,
1 2 3 4
Nipple OTC TTC TTC12 Hose
Part # Part # Part # Part # Thd. T Size A D EØ H 1
HOSE FITTINGS
mm in mm in mm in mm in mm in
1S4BFB4 1G4BFB4 1A4BFB4 — G 1/4 –04 45,8 1.80 22,4 0.88 4,2 0.16 24,8 0.98 17,0 0.67
1S6BFB6 1G6BFB6 1A6BFB6 — G 3/8 –06 58,9 2.32 33,6 1.32 6,7 0.26 35,0 1.38 22,0 0.87
1S8BFB6 1G8BFB6 1A8BFB6 — G 1/2 –06 75,7 2.98 50,4 1.98 6,7 0.26 47,8 1.88 27,0 1.06
1S8BFB8 1G8BFB8 1A8BFB8 1B8BFB8 G 1/2 –08 65,5 2.58 35,8 1.41 9,6 0.38 37,5 1.48 27,0 1.06
1S10BFB10 1G10BFB10 1A10BFB10 — G 5/8 –10 90,6 3.57 61,2 1.41 12,8 0.50 56,3 2.22 27,0 1.06
1S12BFB12 1G12BFB12 1A12BFB12 1B12BFB12 G 3/4 –12 82,2 3.24 52,0 2.05 15,5 0.61 47,5 1.87 32,0 1.26
1S16BFB16 1G16BFB16 1A16BFB16 1B16BFB16 G1 –16 118,2 4.65 83,8 3.30 20,7 0.81 71,5 2.81 41,0 1.61
TUBE FITTINGS
ADAPTERS &
1S20BFB20 1G20BFB20 1AT20BFB20** 1B20BFB20 G 1/4 –20 146,2 5.75 102,2 4.02 26,6 1.05 82,5 3.25 50,0 1.97
ASSEMBLY INSTRUCTIONS
1 2 3 4
ACCESSORIES &
1 2 3 4
HOSE ASSEMBLY
1S20BT20 1G20BT20 1AT20BT20** 1B20BT20 R 11/4 -11 –20 96,2 3.79 52,2 2.05 26,6 1.05 46,0 1.81
— — — 1B24BT24 R 11/4 -11 –24 100,8 3.97 54,5 2.14 32,0 1.26 50,0 1.97
* Uses 1-wire braid hose socket.
**Uses 2-wire braid hose socket.
***The JIS parallel thread and the BSPP connection are interchangeable.
SPECIALTY &
TRUCK HOSE
Millimetrique and British Standard Pipe
GAZ Series (BSP)
PRESSURE HOSE
LOW & MEDIUM
This BSPT (tapered) connec- are close but not the same.
tion is similar to the NPT, Sealing is accomplished by
Millimetrique and
HOSE FITTINGS
GAZ Threads
Tubing “Gaz” Metric
O.D. Pipe O.D. Thread Male Thread Female Thread
“R” dim. “R” dim. size O.D. I.D.
mm in mm in mm in mm in
6 0.24 M12 x 1.5 12 0.47 11 0.43
The BSP (parallel) male is The female swivel BSPP has a
8 0.32 M14 x 1.5 14 0.55 12.5 0.49 similar to the NPSM male tapered nose/Globeseal flare-
10 0.39 M16 x 1.5 16 0.63 14.5 0.57 except the thread pitches are less swivel which seals on the
TUBE FITTINGS
12 0.47 M18 x 1.5 18 0.71 16.5 0.65 different in most sizes. cone seat of the male.
ADAPTERS &
14 0.55 13.25 0.52 M20 x 1.5 20 0.78 18.5 0.73
15 0.59 M22 x 1.5 22 0.87 20.5 0.81
16 0.63 16.75 0.66 M24 x 1.5 24 0.94 22.5 0.89 BSPT/BSPP Threads
18 0.71 M27 x 1.5 27 1.06 25.5 1.00
Nominal
22 0.87 21.25 0.83 M30 x 1.5 30 1.18 28.5 1.12 Inch Dash Thread Male Thread Female Thread
Size size size O.D. Inch O.D. Inch
25 0.98 M33 x 1.5 33 1.30 31.5 1.24
ASSEMBLY INSTRUCTIONS
28 1.10 26.75 1.05 M36 x 1.5 36 1.41 34.5 1.36 fraction decimal fraction decimal
1/ 02 1/ –28 3/ 0.38 11/ 0.35
30 1.18 M39 x 1.5 39 1.54 37.5 1.48 8 8 8 32
ACCESSORIES &
1/ 04 1/ –19 33/ 0.52 15/ 0.47
32 1.25 M42 x 1.5 42 1.65 40.5 1.60 4 4 64 32
3/ 06 3/ –19 21/ 0.65 19/ 0.60
35 1.38 33.50 1.32 M45 x 1.5 45 1.77 43.5 1.71 8 8 32 32
1/ 08 1/ –14 13/ 0.82 3/ 0.75
38 1.50 M48 x 1.5 48 1.89 46.5 1.83 2 2 16 4
5/ 10 5/ –14 7/ 0.88 13/ 0.80
40 1.57 42.25 1.66 M52 x 1.5 52 2.04 50.5 1.99 8 8 8 16
3/ 12 3/ –14 11/32 1.04 31/ 0.97
45 1.77 M54 x 2.0 54 2.12 52 2.05 4 4 32
48.25 1.90 M58 x 2.0 58 2.28 55 2.16 1 16 1–11 15/16 1.30 17/32 1.22
11/4 20 11/4–11 121/32 1.65 19/16 1.56
HOSE ASSEMBLY
*Frequently, the thread size is expressed as a fractional dimension preceded by the letter
“G” or the letter “R”. The “G” represents a parallel thread and the “R” indicates a tapered
thread. For example, BSPP 3/8–19 may be expressed as G 3/8, and BSPT 3/8–19 may be
expressed as R3/8.
APPENDICIES