Академический Документы
Профессиональный Документы
Культура Документы
www.dhollandia.com
DH-LM 750-1000 kg
Application
A
Thanks to its 4-cylinder configuration and its excellent stability and performance in comparison to Capacity chart
competing 2-cylinder products, the DH-LM 750-1000 kg is Dhollandia’s best selling lift for general ■ 500 kg ■ 3000 kg
purpose and light daily distribution work. It is specially designed to suit commercial panel vans and light
■ 750 kg ■ 3500 kg
trucks up to 7.5T GVW, but can also be perfectly mounted to small trailers or semi-trailers.
■ 1000 kg ■ 4000 kg
■ 1500 kg ■ 5000 kg
The product range also contains special executions, such as half width tail lifts (DH-LMZ), 2-cylinder
■ 2000 kg ■ 6000 kg
executions to achieve further weight reductions (DH-LC), lifts for trucks with trailer-coupling mounted
■ 2500 kg ■ 7500 kg
between the chassis beams (arm LMK), for special mounting situations or very short overhangs (DH-
■ 9000 kg
LSP3-6), and tail lifts for tipper vehicles (DH-KA).
General Specifications
G
PLATFORM
• Light weight aluminium platform with non-slip surface
or steel platform, sandblasted and zinc sprayed (only for 1000 kg)
• Standard : aluminium platform with profiles orientated in longitudinal
direction [1], and a surface offering anti-slip protection in both directions [2].
Delivered in alu natural finish.
• Optional : conical platform with profiles orientated in lateral direction
[1]
(see option S275.H01), and anti-slip ripples at right angles to the ride direction.
Delivered in alu natural finish or anodised (option S610).
• Synthetic rollers to protect the platform on the ground
FUNCTIONALITY - MECHANICAL
• Automatic mechanical tilting at ground level
• Platform tilt adjustable at any position from the exterior controls
HYDRAULICAL INSTALLATION
• 2 lift cylinders for maximum platform stability
2 tilt cylinders with spring assisted platform opening
• Electric safety valves on all cylinders [2]
• Manual emergency operation on all electrovalves [4]
• Cylinder piston rods in chromed stainless steel (INOX)
• Compact power pack with noise-dampening cover
ELECTRICAL CONTROLS
• External control in closed synthetic box [3]
• Controlled without electronic components
• 2-handed control for all functions from the exterior controls
• Electric motor with thermal cut-out fuse
FINISH - MAINTENANCE
• Equipment conforms with CE safety Directives
• Low maintenance bushes fitted to all pivot points
• Finish on main steel components : zinc phosphate, KTL epoxy primer and
polyester powder top coat
[4]
S094 Built-in
Built in exterior controls 3+1 S090 Platform lights mounted S660...662
S660 662 flags
Various platform flags
buttons onto the platform
S203 204
S203...204 Extension of platform S215.M
S215 M Manual roll stops S239 Foldable cantilever platform
depth per 10 cm : alu to reduce wind resistance
(S203) and steel (S204) S215.A Automatic roll stops
S314 Quick-fit
Quick-fit mounting plates S362 3-piece bumper bar mounted S412 End stop for the lift arms
adjusted to various types to the lift frame S424
and wheelbases
Related applications
R
DH-LMZ 750-1000 kg - Half-width DH-LC 500-1000 kg - Compact can- DH-LM41 750-1000 kg - 2x2 Light
platform tilever lift with 2 cylinders execution
(instead of 4)
DH LM
DH-LM 500 750 kg - Adaptions for
500-750 DH LSP3 4 6
DH-LSP3…4…6 500 1000 kg - Special adaptations for very short overhang
500-1000
factory built panel vans
EN–02/2008