Академический Документы
Профессиональный Документы
Культура Документы
Suspension System
Centric 15 Mudline Wellhead System
2
Washout Procedure
SD016675
SD016624
1. Hanger is inserted through 2. Split ring arrives at hanger 3. Split ring lands in hanger 4. Hanger seats on split ring; setting
wellhead into casing. Split ring profile where it easily expands prior to hanger suspension ring is forced into fully expanded
is retracted. Setting ring and prior to landing. on load ring. position. Hanger is suspended
fluted hanger section prevent parallel to the receiving profile.
presetting.
3
Mudline Liner Hanger Temporary Abandonment Cap
SD016622
Tieback Methods
SD016629
SD016618
4
Centric 15 EX Mudline Wellhead System
Tieback Features
¥ Robust threads ensure damage-free connection.
¥ Right-hand make-up for surface and
production tieback tools ensures ease of
installation.
¥ Torque profiles available in tieback tools.
¥ Low torque metal-to-metal seals with resilient
back-up ensure sealing integrity.
SD016627
5
Washout Procedure
SD016625
SD016624EX
1. Hanger is inserted through 2. Split ring arrives at hanger 3. Split ring lands in hanger 4. Hanger seats on split ring; setting
wellhead into casing. Split ring profile where it easily expands prior to hanger suspension ring is forced into fully expanded
is retracted. Setting ring and prior to landing. on load ring. position. Hanger is suspended
fluted hanger section prevent parallel to the receiving profile.
presetting.
6
Mudline Liner Hanger Temporary Abandonment Cap
SD016622
Tieback Methods
SD016626
SD016619
7
MX Subsea Tree
8
Centric 15 and 15 EX Capacity Charts
System Variables 30” Hanger 20” Hanger 13 3/8” Hanger 9 5/8” Hanger 7” Hanger
Hanger Type n/a Load Shoulder Load Shoulder Split Ring Split Ring
Service Standard Standard H2S or Standard H2S or Standard H2S or Standard
Min I.D. (in.) 26.25 17.58 12.31 8.803 6.115 (5)/5.905(6)
Max O.D. (in.) 30.30 27.25 18.51 12.23 8.375
Recommended Bit (in.) 26 17 1/2 12 1/4 8 3/4 6 1/8 (5)/5 7/8 (6)
Pressure Rating (psi) n/a 4,020 H2S 9,470 H2S 11,840 (2) H2S 10,610 (5)
Std 10,660 H2S 10,160 H2S 13,340 (6)
Std 13,320 (2) Std 11,940 (5)
Std 11,430 Std 15.010 (6)
Rated Hanging H2S 2,461,000 (1) H2S 1,504,000 H2S 623,000
Capacity (lb) n/a 3,282,000 Std 2,769,000 Std 1,692,000 Std 701,000
Flow-By Running (in.2) n/a 81.90 21.70 9.90/6.61 (3) 4.70/2.6 (4)
Flow-By Landed (in.2) n/a 48.10 14.40 10.3 4.30
Particle size (in.) n/a 1.75 0.88 0.38 0.38
Axial Capacity (lb) H2S 2,165,000 .(1) H2S 1,534,000 H2S 531,000 (5)
(running) n/a 2,422,000 Std 2,436,000 Std 1,726,000 H2S 689,000 (6)
Std 597,000 (5)
Std 776,000 (6)
Thread Type 3 TPI Mod. 3TPI Mod. 3 TPI Mod. 3 TPI Mod.
(left or right hand) n/a Square Thread, Left Square Thread, Left Square Thread, Left Square Thread, Left
Number of Turns
to Full Engagement n/a 7 13 13 13
Number of Turns to 7
Expose Washout Ports n/a (Washout Sleeve) 8 8 7
(1) Hanger body only for H2S service (4) Flow-By areas are for running through 32lb/53lb - 9 5⁄ 8" casing
(2) High pressure system locates washout ports in hangers to enable true metal seal (5) For use with 20lb/29lb - 7" casing
(3) Flow-By areas for running through 48lb/72lb - 13 3⁄ 8" casing (6) For use with 32lb/38lb - 7" casing
System Variables 30” Hanger 16” Hanger 10 3/4” Hanger 7 5/8” Hanger
Hanger Type n/a Load Shoulder Split Ring Split Ring
Service Standard Standard H2S or Standard H2S or Standard
Min I.D. (in.) 20.12 14.99 10.04 6.80
Max O.D. (in.) 30.30 21.13 14.50 9.50
Recommended Bit (in.) 20 14 3/4 9 7/8 6 3/4
Pressure Rating (psi) n/a 6900 H2S 11,300 H2S 10,000
Std 12,800 Std 11,252
Rated Hanging H2S 1,520,000 (3) H2S 926,710
Capacity (lb) n/a 2,897,000 Std 1,710,000 Std 1,042,550
Flow-By Running (in.2) n/a 265 11.90/10.50 (1) 6.1/4.8 (2)
Flow-By Landed (in.2) n/a 24 15.40 5.50 (2)
Particle size (in.) n/a 1.25 0.50 0.38
Axial Capacity (lb) H2S 2,146,000 (3) H2S 926,710
(running) n/a 2,910,000 Std 2,415,000 Std 1,042,550
Thread Type 4 TPI Tapered 3 TPI Mod. 3 TPI. Mod.
(left or right hand) n/a Thread, Left Square Thread, Left Square Thread, Left
Number of Turns
to Full Engagement n/a 2-1/2 13 13
Number of Turns to
Expose Washout Ports n/a n/a 8 8
(1) Flow-By areas are for running through 65 lb/84lb 16" - casing
(2) Flow-By areas are for running through 32.75lb/60lb - 10 3⁄ 4" casing
(3) Hanger body only for H2S service
9
Western Hemisphere
Cameron
PO Box 1212
Houston Texas 77251-1212
Tel 713 939 2211
Fax 713 939 2620
http://www.camerondiv.com
Eastern Hemisphere
Cooper Cameron (U.K.) Ltd.
5 Mondial Way
Harlington
Hayes UB3 5AR
Tel 44 181 9901800
Fax 44 181 9901888
http://www.camerondiv.com
© Cooper Cameron Corporation, Cameron Division, Printed in USA, 12/97, TG/7.5M, WR6415/TC1256