Вы находитесь на странице: 1из 3

Honeywell

____________________________________________________________________________________________
Automation and Control Solutions SSC Parts Assistance Center
Service Parts Bulletin
____________________________________________________________________________________________
Bulletin No: EP-0506-01B
January 31, 2008 page 1
[ Replace Previous Issue March 22, 2006 ]

The following replacement part information is provided for field support use in the servicing and
maintenance of the product noted below:

Product Line: Experion (EPKS)

Description: IOP Firmware Revision Required for PMIO Connection.

Definition: For xPM IOPs to be connected to Experion through the PMIO, they must be at a minimum firmware
revision level. Table 1 shows kits that are currently or will soon be available to upgrade the firmware on existing
IOPs in the field to allow PMIO connection. This upgrade is the replacement of one socketed PROM chip. Table
2 shows which xPM IOPs can be connected to the PMIO and what minimum firmware revisions are required.
Table 3 shows the relationship between the firmware as viewed on a TPS (LCN) system compared to an EPKS
(Experion) station. When looking at the firmware chip, a letter will indicate the current firmware. When the
firmware revision is viewed from a screen, a number will be displayed. Unlike hardware revisions that follow a
fixed Letter to Number relationship, the firmware Letter to Number relationship is unique to each type of IOP

Action: Table 1 shows FW Upgrade kits that are currently or will soon be available to upgrade the firmware on
existing IOPs in the field to allow PMIO connection.

Table 1
Kit Model Description IOP Model IOP #
MC-ZAIHF3 HLAI IOP PAIH03 51304754-100/150
PAIL01 51303988-300
MC-ZLLAI2 LLAI_8 IOP
PAIL02 51304481-100/150
PAOX01 51303985-200/300
MC-ZAOXF2 AO_8 IOP (R3xx)
PAOX02 51304483-100
51304672-150
MC-ZAOXF3 AO_8 IOP (EC) PAOX03
51309152-175
MC-ZAOYF2 AO_16 IOP PAOY22 80363969-100/150
MC-ZDIYF2 DI IOP, High Density PDIY22 80363972-100/150
PDIX01 51303997-300
MC-ZDIXF2 DI IOP
PDIX02 51304485-100/150
PDOX01 51303994-300
MC-ZDOXF2 DO IOP
PDOX02 51304487-100/150
MC-ZDOYF2 DO IOP, High Density PDOY22 80363975-100/150
MC-ZSTXF3 STIM IOP PSTX03 51304516-200/250
MC-ZDISF2 DISOE IOP PDIS12 51402625-125/175
MC-ZLLMF2 LLMUX IOP PLAM02 51304362-100/150
MC-ZRHMF1 RHMUX IOP PRHM01 51404109-125/175

Honeywell ACS SSC Parts Assistance Center


2500 West Union Hills Drive AZ15/P13 (602) 313-3985 Phoenix, AZ 85027
______________________________________________________________________________
Service Parts Bulletin
Bulletin No: EP-0506-01A
Page 2

Table 2 shows what is considered the minimum firmware for a xPM IOP to be connected to a PMIO for Experion.
The "FW — Chip" column gives the part number of the firmware chip and the minimum letter that must be on that
chip for Experion. The part number is included to help identify the chip. Be aware that usually they only place the
last 4 digits of the part number on the chip. For example for the PAIL02 it would have 0575 on the chip along
with its firmware revision letter.

Table 2
FW FW
MODEL FW — Chip d Description
LCN EPKS
PAIL01 6.0 6.00 J- 51120575 LLAI – low level analog input
PAIL02 6.0 6.00 J- 51120575 LLAI – low level analog input
PLAM02 4.1 4.01 F- 51120493 LLMUX – low level multiplexer analog input
PRHM01 6.0 6.00 E- 51120942 RHMUX – remote hardened LLMUX
PAIH03 e 6.1 6.01 G- 51120673 HLAI – high level analog input
PHAI01 1.1 1.01 B- 51121201 HLAIHART – high level AI HART capable
PSTX03 6.0 6.00 F- 51120841 STI-MV – smart transmitter interface, multivariable
PAOX01 3.4 3.04 D- 51120576 AO_8 – analog output, 8 channel c
PAOX02 3.4 3.04 D- 51120576 AO_8 – analog output, 8 channel c
PAOX03 4.2 4.02 C- 51120674 AO_8 – analog output, 8 channel
PAOY22 1.2 1.02 C- 80364453 AO_16 – analog output, 16 channel
PHAO01 1.1 1.01 B- 51121202 AO16HART – AO 16 channel HART capable
PDIX01 3.3 3.03 C- 51120577 DI – digital input
PDIX02 3.3 3.03 C- 51120577 DI – digital input
PDIY22 1.2 1.02 C- 80364451 DI_24V – digital input, 24 volt
PDIS11 4.4 4.04 F- 51120708 DISOE – digital input sequence of events
PDIS12 4.5 4.05 G- 51120708 DISOE – digital input sequence of events
PDOX01 3.6 3.06 F- 51120578 DO_16 – 16 channel digital output
PDOX02 3.6 3.06 F- 51120578 DO_16 – 16 channel digital output
PDOY22 1.3 1.03 D- 80364452 DO_32 – 32 channel digital output

Note: c For R210 release, Rev. E (3.09/3.9) supports 0.0 ma operation.


d MINIMUM for R201/R210. The R201 CRG showed higher revisions for
some IOPs but further evaluation lowered the revision requirements on some
IOPs.
e If the F/W rev is 3.3 (B) or less then the IOP is a PAIH02 and must be
replaced with a PAIH03.

Honeywell ACS SSC Parts Assistance Center


2500 West Union Hills Drive AZ15/P13 (602) 313-3985 Phoenix, AZ 85027
______________________________________________________________________________
Service Parts Bulletin
Bulletin No: EP-0506-01A
Page 3

Table 3 shows the relationship between the firmware as viewed on a TPS (LCN) system compared to an EPKS
(Experion) station.

Table 3
TPS EPKS TPS EPKS
1.0 1.00 1.8 1.08
1.1 1.01 1.9 1.09
1.2 1.02 1.A 1.10
1.3 1.03 1.B 1.11
1.4 1.04 1.C 1.12
1.5 1.05 1.D 1.13
1.6 1.06 1.E 1.14
1.7 1.07 1.F 1.15

Honeywell ACS SSC Parts Assistance Center


2500 West Union Hills Drive AZ15/P13 (602) 313-3985 Phoenix, AZ 85027

Вам также может понравиться