Академический Документы
Профессиональный Документы
Культура Документы
Technical features
Medium: Port size: Ambient/Media temperature: Materials:
Filtered, lubricated or non- G1/4, 1/4 NPT -15 ... +50°C (5 ... +122°F) Housing: Aluminium anodized
lubricated and dry compressed air 3 and 5: G1/8, 1/8 NPT Air supply must be dry enough Pilot flange: Plastic (PBT)
Operation: NAMUR Interface with integrated to avoid ice formation at Flange plate: Aluminium
Indirect solenoid operated recirculation from the exhaust air to temperatures below +2°C (35°F). Seals: NBR
spool valve the acutator sping chamber
Operating pressure: Flow direction: Flow conversion:
2 ... 8 bar (29 ... 116 psi) Fixed Cv US Gallon/min (water) =
Orifice: Mounting position: l/min (air) x 0,001
6 mm Optional Kv m³/h (water) =
l/min (air) x 0,000906
Our policy is one of continued research and development. We therefore reserve the right to amend, 05/16
without notice, the specifications given in this document. (2004 - 5152e) © 2015 Norgren GmbH en 5.4.372.01
97100 NAMUR, 3/2 & 5/2
Indirect solenoid actuated spool valves
4 2 4 2
Technical data
5 13 5 13
Housing:4 Aluminium
42 2
anodized,
4 2
Seals: NBR -15 ... +50°C (+5 ... +122°F)
Symbol Port size Actuation/Return Flow Operating Weight Drawing Model
pressure *1)
5 1 53 1 3 5 13
1 3&5 2&4 (l/min) (bar) (psi) (kg) No.
4 2 4
4 14
42 2 12 44 22 14 G1/42 12
G1/8 Flange Solenoid/Spring 750 2 ... 8 29 ... 116 0,25 1 9710000
1/4 NPT 1/8 NPT Flange Solenoid/Spring 750 2 ... 8 29 ... 116 0,25 1 9710010
5 1 53 1 3 5 1 3 5 1
5 133 51 3
4 14 2 4 2 12 4 2 14 4 G1/42 G1/8
12 Flange Solenoid/Solenoid 750 2 ... 8 29 ... 116 0,35 2 9711000
1/4 NPT 1/8 NPT Flange Solenoid/Solenoid 750 2 ... 8 29 ... 116 0,35 2 9711010
5 13 51 3 5 13 51 3
14 4 2 12 14 4 G1/42 G1/8
12 Flange Solenoid/Solenoid 500 2 ... 8 29 ... 116 0,4 3 9712000
1/4 NPT 1/8 NPT Flange Solenoid/Solenoid 500 2 ... 8 29 ... 116 0,4 3 9712010
51 3 51 3
Our policy is one of continued research and development. We therefore reserve the right to amend,
en 5.4.372.02 without notice, the specifications given in this document. (2004 - 5152e) © 2015 Norgren GmbH 05/16
97100 NAMUR, 3/2 & 5/2
Indirect solenoid actuated spool valves
4 2 4 2
Housing:4 Aluminium
42 2 anodized,
4 2 Seals: NBR -15 ... +50°C (+5 ... +122°F)
Symbol Port size Actuation/Return Flow Operating Weight Drawing Model
5 1 53 1 3 5 13 pressure *1)
1 3&5 2&4 (l/min) (bar) (psi) (kg) No.
4 2 4
4 14
42 2 12 44 22 14 G1/42 12
G1/8 Flange Solenoid/spring 750 2 ... 8 29 ... 116 0,25 1 9710002
1/4 NPT 1/8 NPT Flange Solenoid/spring 750 2 ... 8 29 ... 116 0,25 1 9710012
5 1 53 1 3 5 1 3 5 1
5 133 51 3
4 14 2 4 2 12 4 2 14 4 G1/42 G1/8
12 Flange Solenoid/solenoid 750 2 ... 8 29 ... 116 0,35 2 9711002
1/4 NPT 1/8 NPT Flange Solenoid/solenoid 750 2 ... 8 29 ... 116 0,35 2 9711012
5 13 51 3 5 13 51 3
14 4 2 12 14 4 G1/42 G1/8
12 Flange Solenoid/solenoid 500 2 ... 8 29 ... 116 0,40 3 9712002
1/4 NPT 1/8 NPT Flange Solenoid/solenoid 500 2 ... 8 29 ... 116 0,40 3 9712012
51 3 51 3
When selecting an intrinsically safe power supply, the permissible maximum values according to the Certificate of Conformity should be taken in account.
On the other hand, the low effective inductivity and capacity can be ignored.
Connector DIN EN 175301-803 form A is not scope of delivery,, see table »Accessories»
Our policy is one of continued research and development. We therefore reserve the right to amend,
05/16 without notice, the specifications given in this document. (2004 - 5152e) © 2015 Norgren GmbH en 5.4.372.03
97100 NAMUR, 3/2 & 5/2
Indirect solenoid actuated spool valves
Accessories
Connector Silencer
DIN EN 175301-803 4-pin, 90° 4-pin, 90° 4-pin, straight 4-pin, straight
NAMUR accessories
Throttle control Flange plate Yoke Distance plate for Mounting plate Quick exhaust module *2)
plate *1) pressure switches
Drawings Dimensions in mm
Projection/First angle
Valves
1 2 3
1
0
3
1
0
3
1
131,5
1
G1/4
M5
M5
5,5
3
18
5,5
12
2
206
12
24
G1/4
24
2
18
19,5
56,5
13
19,5
13
5
38,5
2
5
2
20,5
24,5
4
G1/8
G1/8
32
112
25 7,2
40
98
37,2 0
1
Our policy is one of continued research and development. We therefore reserve the right to amend,
en 5.4.372.04 without notice, the specifications given in this document. (2004 - 5152e) © 2015 Norgren GmbH 05/16
97100 NAMUR, 3/2 & 5/2
Indirect solenoid actuated spool valves
Solenoids Dimensions in mm
Projection/First angle
11 12
1
1
29 36
29,5
29,5
11
15
65 12 72 12
22
30
Ø9
Ø9
13 14
29
38,5 10
M12 x 1
29,5
29,5
4
1 3
2
~58
14,5
29,5
22
Ø9
15 72 1
39
15,5
29,5
41,5
18
M16 x 1,5 12
30
28
Ø9
Circuit diagrams
1 13 14 15 17
2
3
Our policy is one of continued research and development. We therefore reserve the right to amend,
05/16 without notice, the specifications given in this document. (2004 - 5152e) © 2015 Norgren GmbH en 5.4.372.05
97100 NAMUR, 3/2 & 5/2
Indirect solenoid actuated spool valves
NAMUR hole pattern (driving side) Conversion instructions of 5/2 into 3/2 way function
5/2 way function 3/2 way function
32
M5 3
24 5/2 3/2
6 5 6 5
1 3
2 3/2 resp. 5/2 way function can be
1 Port 2 (A) achieved just by swapping 5 Arrow
2 Coding stud threaded enclosed adaptor plates. Make 6 Marker
3 M5 (10 deep) sure marker and arrow do match
4 4 Port 3 (R) as shown on above drawing.
Original mode of supply: 5/2
function.
Accessories
Silencer
Model: M/S1, C/S1 Dimensions in mm
Projection/First angle
34
6,5
ø 12,5
1/8”
19 25,5 M5 (4x)
19
25,5
G1/4
35
19
41
16
60
11,5
30
16
12 12
34,5
104
ø 9,5 19
ø 5,5 G1/4
29
19
12
10
ø9 27 21
ø 14,5
Our policy is one of continued research and development. We therefore reserve the right to amend,
en 5.4.372.06 without notice, the specifications given in this document. (2004 - 5152e) © 2015 Norgren GmbH 05/16
97100 NAMUR, 3/2 & 5/2
Indirect solenoid actuated spool valves
45
32
M5
5,5 50 12
41
41 12
76 4
5,5
5 20
12
8
12
25
5
11
60° M5
7,5
B B
15,5
15,5
A A
3
12
3 3 3
12
12
12
24
24
12
26
24
24
37
37
2 1 2 2
12
1 2
58
20
20
20
20
7
7
M5 1 M5 M5 M5
45 24 20 45 24 9
17 12 32 12
32
1 12
2 2
16
37
2 3
16
37
50
24
32
55
24
32
55
43,5
50
43,5
3 2
3 3
12 1
55 55
Our policy is one of continued research and development. We therefore reserve the right to amend,
05/16 without notice, the specifications given in this document. (2004 - 5152e) © 2015 Norgren GmbH en 5.4.372.07
97100 NAMUR, 3/2 & 5/2
Indirect solenoid actuated spool valves
Connector Dimensions in mm
Projection/First angle
90°, 4 pin, with PUR cable 4 pin, without cable
45°
45°
B B
~ 40,5
~ 32,5 Pg7
ø 11
~ 35
~ 27
ø 20
ø 15
Pg7
ø 15
ø 11
ø 20
B
B
~ 40
~ 40,5
EN - Englisch
Warning
These products are intended for use in industrial compressed air systems Through misuse, age, or malfunction, components used in fluid power
only. Do not use these products where pressures and temperatures can systems can fail in various modes. The system designer is warned to
exceed those listed under »Technical features/data«. consider the failure modes of all component parts used in fluid power
Before using these products with fluids other than those specified, for systems and to provide adequate safeguards to prevent personal injury
non-industrial applications, life-support systems or other applications not or damage to equipment in the event of such failure.
within published specifications, consult System designers must provide a warning to end users in the system
IMI Precision Engineering, Norgren GmbH. instructional manual if protection against a failure mode cannot be
adequately provided.
System designers and end users are cautioned to review specific warnings
found in instruction sheets packed and shipped with these products.
Our policy is one of continued research and development. We therefore reserve the right to amend,
en 5.4.372.08 without notice, the specifications given in this document. (2004 - 5152e) © 2015 Norgren GmbH 05/16