Академический Документы
Профессиональный Документы
Культура Документы
1+ 2–
Mounting boss
R +
–
1+ 3+ 2–
Deadband adjustment
1.5 to 20% FS Mounting boss
(factory setting, 10% FS)
Deadband
Uout 1.5 to 20% FS
ON
Red LED
2
Electrical Connections
Red
+
Plug-in White
housing –
Green
GND
Mounting boss
O-ring
0.5A
e.g. Relay,
PLC (-)
L+ L-
Input power 18 to 32 VDC
3
Technical Data
Application Measuring absolute and gauge pressure of gases, vapors and liquids
Accuracy Terminal-based linearity inluding Analog output: ≤ 0.5% FS (limit point method to
hysteresis and reproducibility DIN IEC 770)
Accuracy Switch output: ≤ 1% FS for the switch point
Reproducibility Switch output: ≤ 0.5% FS for the switch output
Response time 2 to 5 ms (to reach 99.9% of output)
Effect of ambient temperature Analog output:
- Zero: typically 0.2%/10 K, maximum
0.5%/10 K of measuring span. Values are 0.1%/10 K
higher for measuring spans ≤ 90 psi (6 bar)
- Span: typically 0.2%/10 K, maximum 0.5%/10 K of
measuring span
Switch output:
- Typically 0.2%/10 K of measuring span
Long-term stability Typically 0.15% per year
4
Operating conditions Mounting conditions Any position, flush-mounted for process connection
G 1/2 (order code B), maximum torque for mounting,
354 in. lb. (40 Nm)
Environment
Normal operating temperature -13° to +158°F (-25° to +70°C)
Ex areas, -13° to +149°F (25° to +65°C)
Storage temperature -40° to +185°F (-40° t +85°C)
Climate class 4 Z with Z = 158°F (70°C) to VDI/VDE 3540
Ingress protection With plug, NEMA 4 (IP 65); with cable, NEMA 6P
(IP 68)
Vibrational resistance 4M5 to DIN EN 60721-3
Electromagnetic compatibility Interference emission to EN 61326 electrical device
B, interference immunity to EN 61326 appendix A
(industrial use) and NAMUR recommendation NE 21
Process
Normal process temperature -13° to +158°F (-25° to +70°C)
Process pressure limits Overload resistance, see Order Code, page 6
Vacuum resistance to 0.14 psia (10 mbarabs)
Mechanical construction Process connections 1/2” NPT (male), 304SS; G 1/2 (male), 304 SS;
G 1/4 (male), 304 SS; or G 1/2 (male) flush
diaphragm, 304 SS
Electrical connection Plug connection (ISO 4400), 1/2” NPT, NEMA 4
(IP 65); plug connection (ISO 4400), PG 11, IP 65;
cable, 16.4 ft. (5 m), NEMA 6P (IP 68)
Cable Outer covering, PUR, non-flammable to VDE 0472,
external diameter, 0.23” (5.8 mm). Internal wires,
4 x 24 AWG (0.22 mm2). External diameter of
air tube, 0.08” (2 mm).
Connection Plug to DIN 43650 A / ISO 4400, PA material
5
Ordering Information Cerabar T PMP 131
1 2 3 4 5
PMP 131 -
6
Dimensions
Version Version
Order code A1: plug with Pg 11 gland Order code A3: cable
Order code A2: plug with 1/2" NPT gland
2.05"
(52)
1.54"
(39)
2.13"
(54)
1.46"
(37)
1/2" NPT
or PG 11
L
L
2.72"
3.11"
(69)
(79)
∅ 1.02" ∅ 1.02"
(26) (26)
27 AF
Pressure Distance
rating L Pressure Distance
< 360 psi 4.96" rating L
(25 bar) (126 mm) < 360 psi 5.63"
> 580 psi 5.16" (25 bar) (143 mm)
(40 bar) (131 mm) > 580 psi 5.83"
(40 bar) (148 mm)
Order code 2: 1/2" MNPT Optional with process connection Order code 3: 1/2" MNPT Order code 4: G 1/4
1/4" FNPT Order code 1: G 1/2 11 mm female
L L L L
0.51"
0.98" 0.79" 0.59" 0.98" (13)
0.59" (20) (25)
(15) (25) (15)
2.05"
(52)
1.54"
2.13" (39)
(54)
1.46"
(37)
1/2" NPT
or PG 11 5.27"
(134)
4.61"
(117) 2.76"
(70) 2.76"
(70)
∅ 1.02" ∅ 1.02"
(26) (26)
0.12"
(3)
27 AF
0.51"
(13)
G 1/2
Threaded hole
∅ 1.02"
(26) to DIN 3852-X-G 1/2
∅ 1.06"
(27) 0.098"
(2.5)
∅ 0.83"
(21)
0.55"
(14) 0.87"
(22)
7
For application and selection assistance,
in the U.S. call 888-ENDRESS
TI 291P/24/ae/02.03
© 2003 Endress+Hauser, Inc.