anino19 Differences betwaen Working sress method and Limit state method | Civil Engineering Proj
Civil Engineering Projects
ake the vision which comes from dreams and apply the magic of science and mathematics, adding the heritage of my
profession and my knowledge of nature's materials to create a design
Differences between Working stress method and Limit state
method
October 14, 2010 by Designer
AREER
ae
Design of RCC Structures
The design of the components of the RCC structure can be done in the following two ways
1. Working Stress Method
2. Limit State Method
Methods of RC Design
Here are some of the design procedures of the components of the RCC structures:
Design of RCC beams
Design of RCC columns
Design of RCC staircase
Design of Foundations
hitp:wwwhilprojectsontine. comybuilding-consiruction/dflerences-between-working-tress-method-and:-lmit-state-method! 19aninore Differences between Working stress method and Limit stale method | Civil Engineering Projects
Design of Simply Supported Slabs
lifference between the two important methods of RCC
s of the Structural Design and which method is to be
In this article, we are going to discuss the major
design. This will help us understand the mechai
adopted for better effi
Working Stress Method
* The Stresses in an element is obtained from the working loads and compared with permissible stresses.
‘+ The method follows linear stress-strain behaviour of both the materials.
‘+ Modular ratio can be used to determine allowable stresses.
‘+ Material capabilities are under estimated to large extent. Factor of safety are used in working stress
method
+ The member is considered as working stress.
* Ultimate load carrying capacity cannot be predicted accurately.
+ The main drawback of this method is that it results in an uneconomical section.
Limit State Method
‘= The stresses are obtained from design loads and compared with design strength,
‘+ In this method, it follows linear strain relationship but not linear stress relationship (one of the major
difference between the two methods of design).
‘+ The ultimate stresses of materials itself are used as allowable stresses.
‘The material capabilities are not under estimated as much as they are in working stress method, Partial
safety factors are used in limit state method.
‘Share this Port
aera | G+ Google | KF Facebook | yp Talter | Phuorost
Related
RCC Building Design and Construction | Introduction to Design of RCC Assumptions for Singly reinforced
Structural Design Structures Sections | RCC Structures
August 4, 2011 November 16, 2010, May 3, 2012
1n*Chil Projects In “Building In “Building Construction
[is Building Construction
® Design of RCC components, Design of RCC structures, Limit State Method, Two Methods of RCC design,
Working Stress Method
< Important Elements of Road Design
> Guide to Design of Shear Reinforcement in a beam
hitp:wwwhilprojectsontine. comybuilding-consiruction/dflerences-between-working-tress-method-and:-lmit-state-method! 29anino19 Differences betwaen Working stress method and Limit state method | Civil Enginearing Projects
25 thoughts on “Differences between Working stress method and Limit state method”
r=
Tools For Glycan Column Layout fora Keep your options open Guide to Design of RCC
Analysis Residence | Civil Columns:
Engineering
Instant Personal Loan Guide to Foundation Moment of Resistance | Design of Sing!
Approval Design | Column Design of Singly reinforced secti
Footings reinforced Sections Design Method
surerra fren array Stet
September 14, 2016 at 12:59 pm | Reply
Why only WSM method is used in costruting water tank
Dhuvaragan
May 25, 2016 at 6:05 pm | Reply
Very useful one
Thanks to you
March 16, 2016 at 2:29 pm | Reply
Thanks for giving the difference in simple meaning & easy to catch up.
Yaregal M.
November 8, 2015 at 6:31 pm | Reply
hitp:wwwchilprojectsontine. comybuilding-consiruction/sfferences-between-working-tress-method-and-lmit-state-method! 39