0 оценок0% нашли этот документ полезным (0 голосов)
219 просмотров1 страница
The generator rotor bearings, the hydrogen shaft seals, and oil passages supplying oils to these parts, are contained and/or supported by the outer end shields. The end shields are split on the horizontal center line facilitating their removal. The joints between the shield halves and the joints between the shields and the stator frame are to fitted and provided with grooves for the insertion of a sealing compound, to seal the hydrogen gas in the generator casing. The application requires a sealant to be pumped in through the channel by a air dispensing equipment. This product is intended to remain in a putty-like state indefinitely, and will swell slightly when in contact with most fuels, tightening the seal in service.
The generator rotor bearings, the hydrogen shaft seals, and oil passages supplying oils to these parts, are contained and/or supported by the outer end shields. The end shields are split on the horizontal center line facilitating their removal. The joints between the shield halves and the joints between the shields and the stator frame are to fitted and provided with grooves for the insertion of a sealing compound, to seal the hydrogen gas in the generator casing. The application requires a sealant to be pumped in through the channel by a air dispensing equipment. This product is intended to remain in a putty-like state indefinitely, and will swell slightly when in contact with most fuels, tightening the seal in service.
The generator rotor bearings, the hydrogen shaft seals, and oil passages supplying oils to these parts, are contained and/or supported by the outer end shields. The end shields are split on the horizontal center line facilitating their removal. The joints between the shield halves and the joints between the shields and the stator frame are to fitted and provided with grooves for the insertion of a sealing compound, to seal the hydrogen gas in the generator casing. The application requires a sealant to be pumped in through the channel by a air dispensing equipment. This product is intended to remain in a putty-like state indefinitely, and will swell slightly when in contact with most fuels, tightening the seal in service.
The generator rotor bearings, the hydrogen shaft seals, and oil passages supplying oils to these parts, are contained and/or supported by the outer end shields. The End- Shields are split on the horizontal center line facilitating their removal. The joints between the shield halves and the joints between the shields and the stator frame are to fitted and provided with grooves for the insertion of a sealing compound, to seal the hydrogen gas in the generator casing. The application requires a sealant to be pumped in through the channel by a air dispensing equipment. This product is intended to remain in a putty-like state indefinitely, and will swell slightly when in contact with most fuels, tightening the seal in service. NIEL-Seal® is a sealant material designed to be injected into channels to form a watertight seal and provide hydrogen sealing in the End-Shields. It is designed to survive harsh environments where most conventional sealants fail. It is highly resistant to contact with solvents, fuels, oils, and many industrial chemicals. Available in two versions – Medium Weight and Light Weight in 5 lb cans under the following part numbers N25-75 for Medium Weight and N20-75 for Light Weight. This product was formerly marketed by RSC Brands as Tite-Seal®. RSC no longer markets this product and it is now marketed under the Niel-Seal brand name by the manufacturer of the Original Product. Project Sales Corp is the Authorised Exclusive Distributor for the brand in India.
NIEL-SEAL INR PRICE
Medium Weight 5 lbs can N25-75 Rs. 9000 Each + GST 18% Extra Light Weight 5 lbs can N20-75 Rs. 8000 Each + GST 18% Extra
For more information, contact us
Phone : (+91) 91009 32334 | Email : sales@projectsalescorp.com All visual content used here are taken from internet or the respective company’s website and are copyrighted to it’s respectful owners. All Brand names, images, logos, product designs are registered trademark of their respective owners and are used for reference purpose only. Tite-Seal is a registered trademark of RSC Brands. Niel-Seal is a brand of Abbey Inc, USA, the original manufacturers of the products earlier sold under Tite-Seal® brand