Академический Документы
Профессиональный Документы
Культура Документы
com
www. .com
Lab Companion U.S.A. - Jeio Tech. Inc Lab Companion SEA (South East Asia)
2400 East Devon Ave, Des Plaines, IL, 60018, U.S.A. No.7A, Jalan Kemboja 1 B/2, 48300 Bandar Bukit Beruntung,
Tel. +1 847 298 6613 Fax. +1 847 699 8487 Selangor Darul Ehsan, Malaysia
pjhwang@jeiotech.com Tel. +60 603 6028 5833 Fax. +60 603 6028 5822
labcomp@streamyx.com
04 www. .com 05
Baths Baths
B Water Baths Shaking Water Baths B
Excellent temperature performance for all-purpose applications Reciprocal shaking water baths
BW-G series features Microprocessor PID controls to guarantee exceptional temperature BS series features more accurate shaking rapidity thanks to noiseless and anti-vibration
uniformity and exclusive timer, programming function for critical research, quality control and Brushless DC motor. The constant temperature performance keeps samples incubated, ideal for
regulatory testing! DNA, and tissue or cell culture applications.
Operating features
5℃ above room temperature to 100℃
Uniformity ±0.2℃ at 50℃ (based on various conditions)
Operating features Microprocess PID control/ built-in Calibration
5℃ above room temperature to 100℃ Digital timer: 1 min 99 hr 59 min, delayed ON/ OFF
Uniformity ±0.2℃ at 50℃ (based on various conditions) Independent over-temperature limiter
Microprocess PID control/ Auto-tuning/ Calibration Digital LED display (0.1℃/ 1 rpm resolution) using
Digital timer: 1 min 99 hr 59 min, delayed ON/ OFF splash-proof keypads
Over-temperature limiter/ Low fluid level protection
3 different temperature values memorable
Constructional features
Digital LED display (0.1℃ resolution) using splash-proof
keypads Shaker mechanism has its own control key, so the unit
can be used as constant temperature baths!
Gently start shaking to minimize shock on the test
samples
Constructional features
Multi-LED display for adjustment of actual value, setpoint
Stainless steel bath allows to use with water or other bath BW-05G included SUS cover temperatures and shaking frequency
fluids, such as silicone fluids
Baffle plate screens circulating pump, heating element BS-21 included SUS covers
User-friendly low-profile baths design with easy-to-
and sensor to minimize fluctuating bath fluids and protect
operate digital controller
sample and operators from direct contact
Dry-running protection; automated heating element cut- Included Accessories Stainless steel flat type cover Included Accessories Stainless steel gable type cover
Shaking carriage is removable and can be assembled
off and audible and visual warning Spring wire racks
outside the bath; no direct contact with the bath fluid
Bottom baffle plate screens heating element and sensor Optional Accessories Open-rings covers
Included bath cover prevents liquid loss, the gable type
to protect sample and operators from direct contact see page 12-13 Test tube racks, Spring wire racks, Optional Accessories Universal platform, Dedicated platform
Half-shelf adjusters
roof ensures no-dripping into the test samples directly
see page 12-13 Flask clamps
Included SUS 304 spring wire rack consists double layer Test tube racks
for various setting of glassware
06 www. .com 07
B Baths Circulators
Visco Baths Heating Circulators C
Ultra precise temperature control with excellent visibility! External and internal circulating with powerful pumping capacity
VB-G series maintains temperatures ±0.02℃ at 50℃, meeting ASTM D445 precision specification CW-G series is designed for controlling temperature in external instrumentation, or for
for kinematic viscosity measurement using glass capillary viscometers. immersion application. Pump pressure is adjustable in five stages.
Operating features
5℃ above room temperature to 150℃
Operating features Uniformity ±0.1℃ at 50℃ (based on various conditions)
5℃ above room temperature to 150℃ Microprocess PID control/ Auto-tuning/ Calibration
Uniformity ±0.02℃ at 50℃ (based on various conditions) Digital timer: 1 min 99 hr 59 min, delayed ON/ OFF
Microprocess PID control/ Auto-tuning/ Calibration Over-temperature limiter/ Low fluid level protection
Digital timer: 1 min 99 hr 59 min, delayed ON/ OFF 3 different temperature values memorable
Over-temperature limiter/ Low fluid level protection Digital LED display (0.1℃ resolution) using splash-proof
3 different temperature values memorable keypads
Digital LED display using splash-proof keypads RS-232 interface available
(0.01℃ resolution at 0 99.9℃/
0.1℃ resolution at 100 150℃) Constructional features
RS-232 interface available Exclusive variable-speed pump for accurate, stable, and
efficient temperature management
(1 to 3 steps of pump for internal circulation/ 4 and 5
VB-40G included SUS covers steps for external circulation)
Constructional features
Powerful pressure and suction pumps provide contrast
Double tempered safety glass windows in front and rear VB-G series will have been certified for CE during the first half pressure and flow rate over the full temperature range
well ensures excellent visibility of 2007.
Baffle plate screens circulating pump, heating element CW-05G included SUS covers
Baffle plate screens circulating pump, heating element
and sensor to minimize fluctuating bath fluids and protect
and sensor to minimize fluctuating bath fluids and protect
sample and operators from direct contact Stainless steel flat type cover
sample and operators from direct contact Included Accessories
Dry-running protection; automated heating element cut- One 30cm (1 ft) length and 12mm
A vane type stirrer makes powerful circulation for
off and audible and visual warning (0.4”) of silicone rubber tubing
creating an optimal temperature uniformity Included Accessories Stainless steel covers for holes in the top
Seamless stainless steel tank with a reservoir drain that
Included stainless steel cooling coil allows to work at Cooling coil
Optional Accessories Suction function for pump
resists corrosion and make cleaning easy
temperatures below or slightly above ambient see page 12-13 Test tube racks, Spring wire racks
Space saving design uses minimal bench space
(Use of optional cooling circulator allows to work at Optional Accessories Viscometer tube holders
temperatures from 10℃/ 50 ) (max. 5 holders for VB-25G/
see page 12-13 max. 8 holders for VB-40G)
51.0mm holes for suspending glass capillary
viscometers tubes and a 12.7mm hole for thermometer
Cooling circulators Specifications & Ordering Informations
Model CW-05G CW-10G CW-20G CW-30G
Bath volume 5.0L (0.18cu ft) 10.0L (0.35cu ft) 20.0L (0.7cu ft) 30.0L (1.05cu ft)
Range 1) Amb. +5℃ to 150℃ (Amb. +9℃ to 302℉)
Specifications & Ordering Informations
Accuracy ±0.05℃ at 50℃ (±0.09℃ at 122℉)
Temperature
Model VB-25G VB-40G Uniformity ±0.1℃ at 50℃ (±0.18℃ at 122℉)
Bath volume 25.0L (0.9cu ft) 40.0L (1.4cu ft) Heat up time 2) 50℃(122℉) within 30 min
Range 1)
~ to 150℃ ( ~ to 302℉) Max. pressure, max. flow rate 406.8 millibar (5.9 PSI), 28.0 liters/minute (7.4 gallons/minute)
Pump Max. suction flow rate 3) 10.0 liters/minute (2.6 gallons/minute)
Accuracy ±0.02℃ at 50℃ (±0.036℉ at 122℉)
Temperature In/ out let size Ø12.7mm (0.5")
Uniformity ±0.02℃ at 50℃ (±0.036℉ at 122℉)
150×99/ 160mm 211×154/ 180mm 290×214/ 200mm 300×264/ 230mm
Heat up time 50℃(122℉) within 30 min Bath opening/ depth (W×L / D)
(5.9×3.9/ 6.3") (8.3×6.1/ 7.1") (11.4×8.4/ 7.9") (11.8×10.4/ 9.0")
Bath opening/ depth (W×L / D) 145×265/ 368mm (5.7×10.4/ 14.5") 295×265/ 368mm (11.6×10.4/ 14.5")
Dimensions 220×395×424mm 281×450×444mm 360×510×464mm 370×560×494mm
Cover lids 5ea/ Ø51.0mm (2.0") 8ea/ Ø51.0mm (2.0") Overall (W×L×H)
(8.7×15.6×16.7") (11.1×17.7×17.5") (14.2×20.1×18.3") (14.6×22.0×19.4")
Dimensions Hole for thermometer 1ea/ Ø12.7mm (0.5") 1ea/ Ø12.7mm (0.5") Net weight 12.5kg (27.6lb) 15.0kg (33.0lb) 17.5kg (38.6lb) 19.5kg (43.0lb)
Overall (W×L×H) 492×374×547mm (19.4×14.7×21.5") 642×374×547mm (25.3×14.7×21.5") Electrical Requirements (230V) 50/60Hz, 4.5A 50/60Hz, 6.7A 50/60Hz, 8.8A 50/60Hz, 8.8A
Net weight 28.0kg (61.7lb) 37.0kg (81.6lb) Cat. No. AAH52305K AAH52315K AAH52325K AAH52335K
Electrical Requirements (230V) 60Hz, 13.0A 50Hz, 13.0A 60Hz, 13.0A 50Hz, 13.0A Electrical Requirements (120V) 50/60Hz, 8.6A 50/60Hz, 8.6A 50/60Hz, 8.6A 50/60Hz, 8.6A
Cat. No. AAH43301K AAH43302K AAH43401K AAH43402K Cat. No. AAH52306U AAH52316U AAH52326U AAH52336U
* VB-25G, 40G series are provided ONLY for 230 voltage. 1) If you operate the unit in 1 to 3 steps of pump, the temperature range can be from Amb. +5℃ but in 4 and 5 steps, the range will be from Amb. +15℃.
1) If you want to operate the unit even below ambient +5℃ (ambient +9℉), the optional cooling circulators must be used with. 2) The heat-up time is measured on a 230V electrical condition with 1000W heater power.
In that case, the temperature range can be from +10℃ (+9℉). Ordering information - refer to P.13 3) The additional suction function is optional.
※ Permissible Environmental Condition: Temperature 5~40℃(41~104℉), Maximum relative humidity 80% ※ Permissible Environmental Condition: Temperature 5~40℃(41~104℉), Maximum relative humidity 80%
08 www. .com 09
Circulators Circulators
C Refrigerated & Heating Circulators Refrigerated & Heating Circulators C
Rapid heating and cooling throughout the entire temperature range! Specifications & Ordering Informations
RW-25G series for temperature range of -25℃ to 150℃
Model RW-0525G RW-1025G RW-2025G RW-3025G
RW-G series has powerful circulation pump for external and internal circulating. The temperatures
Bath volume 5.0L (0.18cu ft) 10.0L (0.35cu ft) 20.0L (0.7cu ft) 30.0L (1.05cu ft)
can be down to maximum -35℃ that maintain and control accurate low temperatures for use with Range -25℃ to 150℃ (-13℉ to 302℉)
Accuracy ±0.05℃ at -10℃ (±0.09℉ at 14℉)
Refractometers and Viscometers. Temperature
Uniformity ±0.1℃ at -10℃ (±0.18℉ at 14℉)
Cool down time 1) 90 min to -25℃(-13℉)
at -20℃ (-4℉) 80W 135W 400W 540W
Cooling at 0℃ (+32℉) 280W 405W 560W 700W
capacity 2) at +20℃ (+68℉) 420W 585W 740W 840W
Refrigerator 1/3 LBP, R-134A 1/3 LBP, R-134A 1/2 LBP, R-404A 3/4 LBP, R-404A
Max. pressure, max. flow rate 406.8 millibar (5.9 PSI), 28.0 liters/minute (7.4 gallons/minute)
Pump Max. suction flow rate 3) 10.0 liters/minute (2.6 gallons/minute)
In/ out let size Ø12.7mm (0.5 ")
150×99/ 160mm 211×154/ 180mm 290×214/ 200mm 300×264/ 230mm
Bath opening/ depth (W×L / D)
(5.9×3.9/ 6.3") (8.3×6.1/ 7.1") (11.4×8.4/ 7.9") (11.8×10.4/ 9.0")
Dimensions 302×438×690mm 360×490×780mm 380×560×825mm 440×620×895mm
Overall (W×L×H)
(11.9×17.2×27.2") (14.2×19.3×30.7") (15.0×22.0×32.5") (17.3×24.4×35.2")
Net weight 37.0kg (81.6lb) 44.0kg (97.0lb) 60.0kg (132.2lb) 67.0kg (147.7lb)
Electrical Requirements (230V, 60Hz) 7.0A 9.2A 12.8A 13.8A
Cat. No. AAH57001K AAH57011K AAH57021K AAH57031K
Electrical Requirements (230V, 50Hz) 7.0A 9.2A 12.8A 13.8A
Cat. No. AAH57002K AAH57012K AAH57022K AAH57032K
Electrical Requirements (120V, 60Hz) 12.6A 12.6A
- -
Cat. No. AAH57003U AAH57013U
* Applicable for CW-G, RW-25G, RW-40G series * RW-2025G, 3025G are provided ONLY for 230 voltage.
* Bath fluid : Water (on the normal temperature) 1) The cool down time is measured on ambient temperature of +20℃ (+68℃) with alcohol.
2) The cooling capacity is measured on a 220V/ 60Hz electrical condition.
3) The additional suction function is optional.
10 www. .com 11
Accessories & Options Accessories & Options
Baths & Circulators Suction function for pumps*
Additional suction function for powerful external/ internal circulating. Maximum suction flow rate is 10.0 liters per minute.
Transparent polypropylene gable type covers (only for CW-G and RW-G series)
Prevent liquid loss due to evaporation, protect samples from contamination. Made of transparent polypropylene to allow to Cat. No. Suitable for
observe the samples and gable type roof accommodates glassware of varying height. (only for BW-E/ B/ D series) 52503 CW-05G/ RW-0525G, 0540G
52513 CW-10G/ RW-1025G, 1040G
Cat. No. Description Suitable for
52523 CW-20G/ RW-2025G, 2040G
AAA45531 Transparent polypropylene gable type BW-05E/ BW-05B
52533 CW-30G/ RW-3025G, 3040G
AAA45532 Transparent polypropylene gable type BW-10E/ BW-10B
* The additional suction function is needed to have a prior request
AAA45533 Transparent polypropylene gable type BW-20E/ BW-20B
Suction function for pumps
Transparent polypropylene gable covers Stainless steel flat type covers
Made of stainless steel to prevent from occurring corrosion and rust. (only for BW-E/ B/ D series)
Visco Baths
Cat. No. Description Suitable for
AAA45541 Stainless steel flat type BW-05E/ BW-05B Viscometer tube holders
AAA45542 Stainless steel flat type BW-10E/ BW-10B Made of thermal endurance material; Bakelite. (only for VB series)
AAA45543 Stainless steel flat type BW-20E/ BW-20B
Cat. No. Suitable for
VB-25G (need Max. 5 holders)
Open-rings covers AAA43501
VB-40G (need Max. 8 holders)
Beakers or Erlenmeyer flasks can be placed directly onto the perforated stainless steel half-shelf adjuster or water tank bottom. Viscometer tube holders
Adjustable rings size for each glassware to minimize liquid loss due to evaporation. (only for BW-E/ B/ D and BW-G series)
Cat. No. Description Suitable for Cooling circulators for visco baths
AAA45521 with 2 openings 80mm dia. (3.1") The temperature range of visco baths series can be from +10 (+50 ) when be used with the additional cooling circulators.
BW-05E/ BW-05B (only for VB series)
AAA45524 with 1 opening 110mm dia. (4.3")
Stainless steel flat covers AAA45522 with 4 openings 80mm dia. (3.1") Cat. No. Suitable for Cooling circulators *
AAA45525 with 2 openings 110mm dia. (4.3") BW-10E/ BW-10B AAH57011K VB-25G (230V, 60Hz) RW-1025G (230V, 60Hz)
AAA45526 with 1 opening 185mm dia. (7.3") AAH57012K VB-25G (230V, 50Hz) RW-1025G (230V, 50Hz)
AAA45523 with 8 openings 80mm dia. (3.1") AAH57021K VB-40G (230V, 60Hz) RW-2025G (230V, 60Hz)
AAA45527 with 6 openings 110mm dia. (4.3") BW-20E/ BW-20B AAH57022K VB-40G (230V, 50Hz) RW-2025G (230V, 50Hz)
AAA45528 with 2 openings 185mm dia. (7.3") * Refer to P.10-11 for more specific information of the cooling circulators.
AAA41561 with 2 openings 80mm dia. (3.1")
BW-05G
AAA41564 with 1 opening 110mm dia. (4.3")
AAA41562 with 4 openings 80mm dia. (3.1") Cooling circulators
AAA41565 with 2 openings 110mm dia. (4.3") BW-10G
AAA41566 with 1 opening 185mm dia. (7.3") Shaking Water Baths
AAA41563 with 6 openings 80mm dia. (3.1")
AAA41567 with 4 openings 110mm dia. (4.3") BW-20G Universal platforms & Flask clamps
AAA41568 with 1 opening 185mm dia. (7.3") The universal platforms provide flexibility for mixing different size test tubes and glassware on a single platform. Available of
clamps for Erlenmeyer flasks. (only for BS series)
Open-rings Covers
Test tube racks BS-06 BS-11 BS-21 BS-31
Highly durable stainless steel racks with adjustable angle and tube height support. Do not need any other base plates to use it, Universal platform Cat. No. AAA44521 AAA44522 AAA44523 AAA44524
simply release and mount racks directly. Max. mountable flask clamps*
Cat. No. Erlenmeyer flask size
Cat. No. Description Insert capacity of racks*
AAA23550 for 50mL 9 12 20 32
AAA44581 for 86 test tubes 8mm dia. (0.3") Universal platforms
BW-10G AAA23551 for 100mL 3 9 15 24
AAA44582 for 86 test tubes 10mm dia. (0.4") BW-05E CW-20G, 30G BW-20G AAA23552 for 250ml 2 4 8 12
AAA44583 for 58 test tubes 12mm dia. (0.5") BW-05B RW-2025G, 2040G,
3025G, 3040G AAA23556 for 300mL 2 4 8 12
AAA44585 for 32 test tubes 16mm dia. (0.6")
AAA23553 for 500ml 2 4 6 12
AAA44586 for 19 test tubes 25mm dia. (1.0") 1EA 2EA 3EA
AAA23554 for 1L 1 2 4 6
AAA41531 for 50 test tubes 8mm dia. (0.3") AAA23555 for 2L - 1 2 3
BW-05G
AAA41532 for 50 test tubes 10mm dia. (0.4") CW-10G AAA23557 for 2.8L - 1 1 2
AAA41533 for 33 test tubes 12mm dia. (0.5") RW-1025G, 1040G
AAA41535 for 16 test tubes 16mm dia. (0.6") 2 and 2.8L flasks must be used with opening the bath cover due to height problem.
Test tube racks 1EA * Flask clamps for Universal platform are sold separately.
AAA41539 for 10 test tubes 25mm dia. (1.0")
AAA45551 for 176 test tubes 8mm dia. (0.3")
AAA45552 for 176 test tubes 10mm dia. (0.4") BW-10E BW-20E Dedicated platforms
AAA45554 for 84 test tubes 12mm dia. (0.5") BW-10B BW-20B
If using a single flask size only, the dedicated platforms provide maximum capacity, and come with clamps installed. Provided Flask clamps
AAA45556 for 68 test tubes 16mm dia. (0.6") 1EA 2EA standard clamp sizes are 250mL and 500mL, but possibly provide the other size of clamps also. (only for BS series)
AAA45561 for 33 test tubes 25mm dia. (1.0")
Cat. No. Description
* No declination AAA44531 An universal platform for BS-06 with 250mL flask clamps 2ea on
AAA44532 An universal platform for BS-06 with 500mL flask clamps 2ea on
AAA44541 An universal platform for BS-11 with 250mL flask clamps 4ea on
Spring wire racks AAA44542 An universal platform for BS-11 with 500mL flask clamps 4ea on
Ideal for holding a wide variety of tubes, flasks, and other glassware. All component are made of stainless steel. (for all models) AAA44551 An universal platform for BS-21 with 250mL flask clamps 8ea on
Cat. No. Suitable for AAA44552 An universal platform for BS-21 with 500mL flask clamps 6ea on
AAA45502 BW-10E/ BW-10B AAA44561 An universal platform for BS-31 with 250mL flask clamps 12ea on
AAA45503 BW-20E/ BW-20B AAA44562 An universal platform for BS-31 with 500mL flask clamps 12ea on
Spring wire racks
AAA41502 BW-10G * A dedicated platform is sold with setting each max. mountable amount of flask clamps on.
AAA41503 BW-20G
AAA51522 CW-20G/ RW-2025G, 2040G
Dedicated platforms
AAA51523 CW-30G/ RW-3025G, 3040G Test tube racks
Highly durable stainless steel racks with adjustable angle and tube height support. Do not need any other base plates to
Half-shelf adjusters use it, simply release and mount racks directly.
Stainless steel perforated tray with adjustable height support Putting flat bottom glassware on the shelf without insert. Cat. No. Description Insert capacity of racks*
(only for BW-E/ B/ D and BW-G series) AAA44581 for 86 test tubes 8mm dia. (0.3")
AAA44582 for 86 test tubes 10mm dia. (0.4")
Cat. No. Suitable for BS-06 BS-11 BS-21 BS-31
AAA44583 for 58 test tubes 12mm dia. (0.5")
AAA45511 BW-05E/ BW-05B 1EA 2EA 3EA 4EA
AAA44585 for 32 test tubes 16mm dia. (0.6")
AAA45512 BW-10E/ BW-10B
AAA44586 for 19 test tubes 25mm dia. (1.0")
AAA45513 BW-20E/ BW-20B
AAA41551 BW-05G * No declination
Half-shelf adjusters AAA41552 BW-10G ※ In addition to providing standard accessories, we will manufacture customized accessories to meet your specific
Test tube racks
AAA41553 BW-20G requirements. Contact us for details.
12 www. .com 13
Other Products Other Products
O Electrical Aspirator Pumps Ultrasonic Cleaners O
Portable dual-channel, water-jet aspirator pumps Aggressive cleaning ability in a variety of sizes!
VE-11 creates vacuum by an aspirator pump that is dependent on the vapor pressure of water; Industrial B.L.T type ultrasonic transducer generates high-frequency sound waves.
which, in turn, is a function of temperature. Ideal for rotary vacuum evaporator, decompressing UC/ US-P types are increased the output of waves to improve cleaning ability.
distillation, vacuum drying, and vacuum filtering.
Features for UC series (ABS/ PBT housing, SUS tank)
Durable leakproof ABS/ PBT housing and cover with 304 SUS tank
Maximum heating temperature is 70℃
Features
(except for UC-02: to 50℃ with on/off switch only)
Built-in circulating pump and water tank make these units
portable and eliminate water waste Digital LED display using splash-proof keypads, temperature monitor
Circulating pump continuously forces water across a set 40 kHz sound waves - greater cleaning power
of aspirators-operating quiet, clean and efficient Multiple frequency on 3 stages for gentle, intensive cleaning
Included two metal aspirators to create the vacuum with
Included Accessories Cover 304 stainless steel wire basket UC-10 included cover and basket
a built-in check valve to prevent backflow of water into
the system
Wetted parts: 304 stainless steel, polypropylene, silicone, Specifications & Ordering Informations
and nickel-coated brass
Model UC-02 UC-05 (05P) UC-10 (10P) UC-20 (20P)
Tank features a drain port and spigot for easy water Bath volume 2.0L (0.07cu ft) 5.7L (0.20cu ft) 10.0L (0.35cu ft) 20.0L (0.70cu ft)
changes Amb. ~ to 50℃
Temperature range Amb. ~ to 70℃ (Amb. ~ to 158℉)
Unlike other vacuum pumps, be allowed to suck little (Amb. ~ to 122℉)
solvent(water) in the units Timer 1 to 99 min
142×132/ 104mm 300×150/ 150mm 300×240/ 150mm 495×292/ 150mm
Bath opening/ depth (W×L / D)
(5.6×5.2/ 4.1") (11.8×5.9/ 5.9") (11.8×9.4/ 5.9") (19.5×11.5/ 5.9")
VE-11 with optional vacuum gauge/ regulator Dimensions 290×210×200mm 455×398×267mm 490×368×297mm 721×451×297mm
Overall (W×L×H)
(11.4×8.4×7.9") (18.0×15.7×10.5") (19.3×14.5×11.7") (28.4×17.8×11.7")
Net weight 2.0kg (4.4lb) 8.0kg (17.6lb) 11.0kg (24.3lb) 17.0kg (37.5lb)
Electrical Requirements (230V, 50/60Hz) 0.3A 0.7A (0.9A) 0.9A (1.3A) 1.7A (2.2A)
Specifications & Ordering Informations Cat. No. BDH53015 BDH53025 (BDH53035) BDH53045 (BDH53055) BDH53065 (BDH53075)
Electrical Requirements (120V, 50/60Hz) 0.6A 1.3A (1.7A) 1.7A (2.5A) 3.3A (4.2A)
Model VE-11 Cat. No. BDH53013 BDH53023 (BDH53033) BDH53043 (BDH53053) BDH53063 (BDH53073)
Bath volume 9.5L (0.3cu ft) ※ Permissible Environmental Condition: Temperature 5~40℃(41~104℉), Maximum relative humidity 80%
Max. vacuum range 0.0998MPa (29.5"Hg)
Free-air capacity 18L/minute (0.6cfm) × 2ea
Bath Polypropylene
Material
Aspirator Nickel-coated brass × 2ea Features for US series (Steel housing, SUS tank)
Bath internal (W×L / D) 298×210/ 227mm (11.7×8.3/ 8.9") Tank & cover are consist of 304 SUS and powder coated steel housing
Overall (W×L×H) 330×265×390mm (13.0×10.4×15.4") Maximum heating temperature is 70℃
Dimensions Inhale nozzle external Ø9.5mm (0.4") × 2ea Digital LED display using splash-proof keypads, temperature monitor
Drain cook, over flow nozzle Ø17.0mm (0.7")
40 kHz sound waves - greater cleaning power
Net weight 5.7kg (12.6lb)
Electrical Requirements 230V, 50/60Hz, 0.7A 120V, 50/60Hz, 1.4A
Multiple frequency on 3 stages for gentle, intensive cleaning
Cat. No. AAH71015K AAH71016U Included Accessories Cover 304 stainless steel wire basket
※ Permissible Environmental Condition: Temperature 5~40℃(41~104℉), Maximum relative humidity 80%
US-20 included cover and basket
14 www. .com 15