Академический Документы
Профессиональный Документы
Культура Документы
Regal R&O
Categories: Industrial Oils
Regal R&O oils exceed the requirements of major equipment manufacturers and comply fully with the requ
British Standards BS 489:1999 and German Standard DIN 51515 Part 1.
They are available in ISO viscosity grades 32, 46, 68 and 100. An ISO 220 grade finds use as a cylinder
reciprocating compressors.
APPLICATIONS
PRODUCT BENEFITS
Prolonged oil service life: Superior oxidation stability provided by the multi-component inhibitor system re
breakdown during exposure to high temperature conditions for longer service life.
Saves on maintenance and downtime: Highly refined base stocks and multi-component oxidation inhibito
resist the formation of harmful sludge and varnish deposits. The special rust inhibitor protects
corrosion.
Trouble free operation: Excellent water separability of the highly refined base stocks and special
ensure rapid settling of harmful water accumulated from steam condensate. The non silicone foam inhibitor
release of entrained air while minimising foam formation to enable reliable operation of sensitive
devices.
http://www.caltex.com.au/ProductsAndServices/Pages/LubricantProductsPrint.aspx?ID=... 10/27/2013
Page 2 of 3
Saves on inventory: Premium quality rust and oxidation inhibited formulation has multipurpose capability i
range of industrial applications for which this type of product is recommended, simplifying oil inventories an
the possibility of using the wrong lubricant.
PERFORMANCE CHARACTERISTICS
KEY PROPERTIES
Oxidation Stability:
Pour Point, °C -9 -9 -9 -9
SERVICE CONSIDERATIONS
Premium quality turbine oils must be capable of lubricating and cooling the bearings while protecting the sy
rust, corrosion and harmful deposits. Since turbine equipment is normally used in key applications, the relia
rotating machinery and its lubricant is critical.
Regal R&O oils have demonstrated superior service in all types of industrial steam, gas and hydraulic turbi
equipment is expected to have a long, reliable service life because of its high cost and type of service such
power generation. Periodic monitoring of the oil in service is recommended to assure satisfactory performa
turbine. The principal reasons for monitoring are two-fold: firstly, to determine the condition of the used oil a
to disclose environmental or operational problems within the equipment. The oil should be visually inspecte
operator at frequent intervals for contaminants and/or appearance changes. If the appearance is normal, th
annual samples are sufficient for laboratory evaluation. Samples should be taken from the discharge side o
while the system is circulating.
http://www.caltex.com.au/ProductsAndServices/Pages/LubricantProductsPrint.aspx?ID=... 10/27/2013
Page 3 of 3
During service, effective purification of the lubricating oil is recommended for the removal of contaminants s
and solids.
Care should be taken to insure against cross-contamination with other oils, as this could reduce the perform
characteristics of Regal R&O.
Users should consult the MSDS, follow the precautions outlined and comply with all laws and regulations c
use and disposal. Used packaging material should not be incinerated or exposed to flame. After use, protec
environment. Do not pollute drains, soil or water with used product.
OTHER INFORMATION
For further information on Caltex products and services call the Lubelink Advisory Service on 1300 364 169
8.00 am and 5.00 pm (EST) Monday to Friday.
All reasonable care has been taken to ensure that the information contained in this publication is accurate a
printing. However, the information is liable to variation in the event of subsequent changes in the blend,
method of storage, improper handling and usage etc.
http://www.caltex.com.au/ProductsAndServices/Pages/LubricantProductsPrint.aspx?ID=... 10/27/2013