Академический Документы
Профессиональный Документы
Культура Документы
INT-LV3-D
01-09-15 / Version 3
Please read Assessor and Verifier Guidance prior to delivering these Practical
Assessments.
Please Note: The number of tasks that require completing for each unit are specified in the
evidence requirements of the Assessment Criteria document for each qualification.
e.g. 3 systems out of 5 listed
01-09-15 / Version 3
IMI INT L3 LV Vehicle Maintenance and Repair Practical Assessments
Date of activities
Learner Name: MUHAMMAD SYAKIME BIN HAZLAN (may be more 12.04.2018
than one):
Vehicle/Rig details
Tick tasks
Customer Request: carried
out (√)
1. Remove at least 4 different components from the 12 listed below on at least two occasions, observing
normal workshop policies with regard to Health & Safety and vehicle protection
√
2. Replace the chosen components and check for security and functionality √
Bumpers Doors
01-09-15 / Version 3 2
IMI INT L3 LV Vehicle Maintenance and Repair Practical Assessments
Apabila cuba untuk hidupkan enjin, enjin boleh di crank tetapi tidak hidup.
Periksa bateri dan dapati voltan bateri tidak mengikut spesifikasi.
PPE worn and special precautions taken: Technical data used to complete task:
1) Put your safety precaution taken for the task Test measurement Refer to Page 5
Sarung tangan
Protective eyewear
Untuk mengelakkan acid bateri yang menghakis
mungkin tumpah
2) Put your safety equipment/ tools wear during the task Prosedur penukaran Refer to Page 5
Sarung tangan
Protective eyewear
Safety boot
Special tools used including any calibration required: Further faults found:
Spanner set
Playar
01-09-15 / Version 3
IMI INT L3 LV Vehicle Maintenance and Repair Practical Assessments
2.2 Use suitable personal protective equipment and vehicle coverings throughout all light vehicle removal and fitting of basic MET
components and non-permanently fixed light vehicle body panels
2.
2.2. Work in a way which minimises the risk of damage or injury to the vehicle, people and the environment
4.1. Select suitable sources of technical information to support light vehicle removal and fitting activities including:
4.2. Use technical information to support light vehicle removal and fitting activities
5.1. Select the appropriate tools and equipment necessary for carrying out removal and fitting of basic MET components and non-
permanently fixed light vehicle body panels
5. 5.2. Ensure that equipment has been calibrated to meet manufacturers’ requirements
5.3. Use the correct tools and equipment in the way specified by manufacturers when carrying removal and fitting of basic MET
components and non-permanently fixed light vehicle body panels
6.1. Remove and fit basic MET components and non-permanently fixed light vehicle body panels
6.2 Ensure that the removal and fitting of basic MET components and non-permanently fixed light vehicle body panels conforms to
the vehicle operating specification
6.
6.3 Ensure no damage occurs to other components when removal and fitting of basic MET components and non-permanently fixed
light vehicle body panels
6.4 Ensure all components and panels are stored safely and in the correct location
7.1. Produce work records that are accurate, complete and passed to the relevant person(s) promptly in the format required
7.2. Make suitable and justifiable recommendations for cost effective repairs
7.
7.3. Record and report any additional faults noticed during the course of their work promptly in the format required
2 The learner worked safely and minimised risks to themselves and others
5 The learner correctly selected and used appropriate tools and equipment
6 The learner correctly carried out the task required using suitable methods and testing procedures
Tick Written feedback (with reference to assessment criteria) must be given when a learner
Assessor Name (Print)
(√) is referred:
PASS
01-09-15 / Version 3
IMI INT L3 LV Vehicle Maintenance and Repair Practical Assessments
REFER
The section below is only to be completed once the assessor decision has been made and feedback given to learner:
I confirm that the work Learner name (Print): Learner Signature: Date:
carried out was my own,
and that I received MUHAMMAD SYAKIME BIN HAZLAN
feedback from the
Assessor
01-09-15 / Version 3
IMI INT L3 LV Vehicle Maintenance and Repair Practical Assessments
WORK PROCESS.
START
Bateri dalam
keadaan tidak
baik?
YA
Tukar bateri
TEST MEASUREMENT.
Bateri
Prosedur Penukaran
Longgarkan kabel bolt pada terminal negative dan tanggalkan dari terminal bateri.
Longgarkan kabel bolt pada terminal positive dan tanggalkan dari terminal bateri.
Keluarkan bateri dari tempatnya dengan berhati – hati.
Tukarkan bateri yang baru dan letakkan di tempat bateri dengan cermat.
Sambungkan kabel pada terminal positive dan ketatkan bolt.
Sambungkan kabel pada terminal negative dan ketatkan bolt.
Pastikan bateri didalam housingnya dan dalam keadaan yang rapi.
Terminal bateri diikat ketat dengan torque tertentu dan prosedur penukaran ini mengikut servis
manual.
7
01-09-15 / Version 3