Академический Документы
Профессиональный Документы
Культура Документы
Max. Tempera-
Composition
Conductivity
Tensile Test
Expansion
Treatment
Hardness
ture in Air
Thermal
Thermal
Average
Specific
Weight
Alloy
Heat
Long term Characteristics
Tem-
pera- 600°C 700°C 800°C 900°C 1000°C 1100°C
ture
P S Rp0,2 Rm [J/
Tempera-
Symbol
tur [°C]
others
Desi- C Si Mn Cr Mo Ni Nb Co A [%] [HB] [W/(m*K)] [10-6*K-1] Ten-
Mate- max. max. [Mpa] a [Mpa] a [kg/dm3] (kg*K)] σr e σ1% f σr e σ1% f σr e
σ1% f σr e σ1% f σr e
σ1% f σr e σ1% f [°C]
gnation [%] [%] [%] [%] [%] [%] [%] [%] min. max. at between 20°C and sion
[%] [%] min. min. at
NiCrSi 1.4806 bis - 2,00 0,040 0,030 - 0,50 - - - - 220 420 6 - 8,0 500 12 12,3 23 26,8 15,3 17 17,6 - - - - 80 55 90 50 30 48 30 17 28 17 6 - 6 3 1000
35-17 0,50 2,50 18,00 36,00
Austenitic Types
(b) At working temperatures below 1000°C, it can be advisable to limit the percentage by mass ofCr to 29,00%-32,00% and of Si to 1,00%-1,50%, because unfavourable conditions can cause embrittlement.
(e) σr - means tension in MPa for fracture after 100h and 1.000h