Академический Документы
Профессиональный Документы
Культура Документы
Loading "flash:/c2960-lanbase-mz.122-25.FX.bin"...
########################################################################## [OK]
Restricted Rights Legend
Cisco WS-C2960-24TT (RC32300) processor (revision C0) with 21039K bytes of memory.
Switch>ENABLE
Switch#CONFIG
Switch#CONFIGure TERM
Switch#CONFIGure TERMinal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#HOSTNAME SISTEMAS
SISTEMAS(config)#INTERFACE VLAN 1
SISTEMAS(config-if)#IP
% Incomplete command.
SISTEMAS(config-if)#?
Interface configuration commands:
arp Set arp type (arpa, probe, snap) or timeout
description Interface specific description
exit Exit from interface configuration mode
ip Interface Internet Protocol config commands
no Negate a command or set its defaults
shutdown Shutdown the selected interface
standby HSRP interface configuration commands
SISTEMAS(config-if)#IP
% Incomplete command.
SISTEMAS(config-if)#IP ?
address Set the IP address of an interface
helper-address Specify a destination address for UDP broadcasts
SISTEMAS(config-if)#IP ADDRESS
% Incomplete command.
SISTEMAS(config-if)#IP ADDRESS 192.168.10.5 255.255.255.0
SISTEMAS(config-if)#NO SH
SISTEMAS(config-if)#NO SHutdown
SISTEMAS(config-if)#
%LINK-5-CHANGED: Interface Vlan1, changed state to up
SISTEMAS(config-if)#EXIT
SISTEMAS(config)#?
Configure commands:
access-list Add an access list entry
banner Define a login banner
boot Boot Commands
cdp Global CDP configuration subcommands
clock Configure time-of-day clock
crypto Encryption module
do To run exec commands in config mode
enable Modify enable password parameters
end Exit from configure mode
exit Exit from configure mode
hostname Set system's network name
interface Select an interface to configure
ip Global IP configuration subcommands
line Configure a terminal line
logging Modify message logging facilities
mac MAC configuration
mac-address-table Configure the MAC address table
mls mls global commands
no Negate a command or set its defaults
port-channel EtherChannel configuration
privilege Command privilege parameters
SISTEMAS(config)#IP ?
access-list Named access-list
default-gateway Specify default gateway (if not routing IP)
dhcp Configure DHCP server and relay parameters
domain IP DNS Resolver
domain-lookup Enable IP Domain Name System hostname translation
domain-name Define the default domain name
ftp FTP configuration commands
host Add an entry to the ip hostname table
name-server Specify address of name server to use
ssh Configure ssh options
SISTEMAS(config)#IP DEFAUL GA
SISTEMAS(config)#IP DEFAULT-GA
SISTEMAS(config)#IP DEFAULT-GAteway 192.168.10.1
SISTEMAS(config)#LINE VTY 0 15
SISTEMAS(config-line)#PASS
SISTEMAS(config-line)#PASSword CIS
SISTEMAS(config-line)#PASSword CISCO
SISTEMAS(config-line)#LOGI
SISTEMAS(config-line)#LOGIn
SISTEMAS(config-line)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
SISTEMAS#COPY RUN
SISTEMAS#COPY RUNning-config STA
SISTEMAS#COPY RUNning-config STArtup-config
SISTEMAS#
SISTEMAS#
SISTEMAS>ENABLE
SISTEMAS#CONFIGURE TER
SISTEMAS#CONFIGURE TERminal
Enter configuration commands, one per line. End with CNTL/Z.
SISTEMAS(config)#ENABLE PAS
SISTEMAS(config)#ENABLE PASsword CISCO1
SISTEMAS(config)#ENABLE SECR
SISTEMAS(config)#ENABLE SECRet CISCO2
SISTEMAS(config)#EXIT
SISTEMAS#
%SYS-5-CONFIG_I: Configured from console by console
SISTEMAS#COPY RUN
SISTEMAS#COPY RUNning-config STA
SISTEMAS#COPY RUNning-config STArtup-config
SISTEMAS#
SISTEMAS#SHOW RON
SISTEMAS#SHOW RUN
SISTEMAS#SHOW RUNning-config
Building configuration...
SISTEMAS#
SISTEMAS#
SISTEMAS#
SISTEMAS#
SISTEMAS#
SISTEMAS#
SISTEMAS#
SISTEMAS#
SISTEMAS#
SISTEMAS#
SISTEMAS#
SISTEMAS#
SISTEMAS#
SISTEMAS#
SISTEMAS#
SISTEMAS#
SISTEMAS#
SISTEMAS#ONFIGURE TER
SISTEMAS#ONFIGURE TERM
SISTEMAS#ONFIGURE TERMINAL
^
% Invalid input detected at '^' marker.
SISTEMAS#CONFI
SISTEMAS#CONFIgure TERM
SISTEMAS#CONFIgure TERMinal
Enter configuration commands, one per line. End with CNTL/Z.
SISTEMAS(config)#LINE CONS
SISTEMAS(config)#LINE CONSole 0
SISTEMAS(config-line)#PASS
SISTEMAS(config-line)#PASSword CISCO1
SISTEMAS(config-line)#LOGIN
SISTEMAS(config-line)#EXIT
SISTEMAS(config)#EXIT
SISTEMAS#
%SYS-5-CONFIG_I: Configured from console by console
SISTEMAS#WR
SISTEMAS#WRite
Building configuration...
[OK]
SISTEMAS#CONFIGURE TER
SISTEMAS#CONFIGURE TERminal
Enter configuration commands, one per line. End with CNTL/Z.
SISTEMAS(config)#BAN
SISTEMAS(config)#BANner MOT
SISTEMAS(config)#BANner MOTd *
Enter TEXT message. End with the character '*'.
----- ACCESO DENEGADO CONSULTE SU ADMINISTRADOS DE SISTEMAS
SISTEMAS(config)#WR
^
% Invalid input detected at '^' marker.
SISTEMAS(config)#COPY
^
% Invalid input detected at '^' marker.
SISTEMAS(config)#EXIT
SISTEMAS#
%SYS-5-CONFIG_I: Configured from console by console
SISTEMAS#WR
Building configuration...
[OK]
SISTEMAS#
SISTEMAS#