Академический Документы
Профессиональный Документы
Культура Документы
USER MANUAL
EN
INTRODUCTION
Breeze FPV Controller allows users to pilot their Breeze in a new way. The portable Game Controller is connected to the smart
device via Bluetooth, and enables users to control the Breeze accurately with physical joysticks and buttons. It is compatible
with the Breeze Cam application (Breeze Cam is a remote control application for Breeze) on iOS devices (above iOS 8.0
version) and Android devices (above 4.4 version), so you can use them instead of the touch screen of your smart device to
control the Breeze. Meanwhile, it turns your smart device into a display screen, making every moment you shoot look smooth,
professional and ready to share. The Breeze FPV Controller features two view modes: FPV Mode and Normal Mode. You can
view the images through the FPV Goggles or from your smart device.
OVERVIEW
16 17
EN
SPECIFICATIONS
Working Platforms: iOS/Android Charging Current: 1A-2A
Working Temperatures: -20~65 Working Distance: Approx.7M
Working Humidity: 20~80% Battery Capacity: 600mA
Connection Types: Bluetooth Product Size: 160 x 104 x59mm
Charging Voltage: 3.7~5.2V Net Weight: 189g
Charging Time: 2-3H
PREPARATIONS
1. CHARGING THE BATTERY
1. Charge under connection state
After connecting the charging cable, Power button and ABXY lights flash once/2 seconds, and the lights keep on when
fully charged.
2. Charge under sleeping state
After connecting the charging cable, the Game Controller turns on and enters current mode, no signal receiving after 1
minute, mode lights turn off. Power button and ABXY lights start flashing, and the lights keep on when fully charged.
3. Low Battery Indication
Power button and ABXY lights flash once/second.
NOTICE: The Game Controller enters sleep state after 1-minute disconnection. USB Ga
me
Sir
GameSir
NOTICE: The Game Controller enters sleep state after 5-minute no action.
EN
Battery Warnings:
To charge the LiPo battery, you must only use the included charger.
Do not over-discharge the LiPo battery.
If at any time the LiPo battery begins to balloon or swell, discontinue charging or discharging immediately.
Always terminate all processes if the battery/charger malfunctions.
Store the LiPo battery at room temperature and in a dry area for best results.
Allow the LiPo battery to cool to ambient/room temperature before recharging.
Never charge the LiPo battery unattended at any time.
can connect the Wi-Fi network directly. Select the network: NEXT
BreezeXXXXXX and enter the Password: 1234567890.
FPV MODE
Step 2) There are 6 Flight Modes for you to select in the Task
page. To enter the FPV Mode, you can select the [ ] icon.
FPV MODE
PILOT SELFIE ORBIT JOURNEY FOLLOW
ME
FPV MODE
60 % 8
You are about to activate FPV Mode. Place Breeze on the ground with the
tail facing you. Ensure that Breeze is in a safe place and free of
obstructions. Please keep a safe distance (indoor:2m/6ft, outdoor:4m/13ft)
between Breeze, people and surroundings.
Step 3) Slide the “SLIDE TO PROCEED” bar to confirm that
you have entered the FPV Mode. Note: In this mode, you are required to have the whole set of the Breeze
FPV Controller.
SLIDE TO PROCEED
Step 5) Tap the “Experience Now” icon on the screen, and Tap "Experience Now" icon, and place your Mobile Phone into the FPV
Goggles. Press R2 to view all button descriptions.
place your smart device in the FPV Goggles. You can view the
images through the FPV Goggles. Experience Now
NOTICE: When the Game Controller is connected to your
smart device successfully, the Game Controller vibrates, and
the [ ] or the [ ] indicator light keeps on.
NOTICE: In this mode, you can use the Game Controller to pilot your Breeze instead of the on-screen buttons within the
Breeze Cam app.
NORMAL MODE
Step 1) Tap the [ ] icon in the upper left corner of the screen, 60 % Normal Mode 8
to switch from FPV Mode to Normal Mode. (FPV Mode and
Normal Mode can be switched by pressing the [ ] icon and
FPV MODE
[ ] icon.)
Step 2) Tap the "Experience Now" icon on the screen, and
mount your smart device to the Game Controller Holder. You
can view the images on your smart device with the Game
Controller. Tap "Experience Now" icon, and mount your Mobile Phone to the Game
Controller Holder. Press R2 to view all button descriptions.
NOTICE: In this mode, you can use the Game Controller to pilot
Experience Now
your Breeze instead of the on-screen buttons within the Breeze
Cam app.
EN
Installation Method for the Game Controller Holder:
Step 1) Press the buckle of the holder downward to unlock.
Step 2) Pull up the Clamp Retainer.
Step 3) Attach Game Controller to the clip then pull back the
clamp retainer.
Step 4) Button up the buckle.
Step 5) Open the seat of the holder and mount your smart device.
Step 6) Loosen the smart device holder’ s screws.
Step 7) Adjust the angle to fit your phone.
Step 8) Tighten the screws.
RF EXPOSURE WARNING
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation
instructions and transmitter operating conditions for satisfying RF exposure compliance.
INTRODUCTION
Breeze is a flying camera that is designed to take aerial photos and videos of you. It is small, easy to fly both indoors and
outdoors, and is controlled by your smart phone or tablet computer. The application (Breeze Cam) features five custom
automatic flight modes that make positioning Breeze very easy. Once you’re done flying, you can download photos and
videos to your device and share them to your favorite social networks directly from the app.
Breeze
01 GPS Module 01
02 Battery Locking Tab 05 02 13
03 11.1V 1150mAh Li-Po Battery 03 07
04 USB Port
06
05 Clockwise Propeller 11
06 Counter-clockwise Propeller 14
12
07 Landing Gear
08 Lens Assembly 07
09 Motor 08
09 08
10 Quick-release Propeller Protector
11 Optical Flow Camera
12 IR Sensor 10 04
13 Power Button
14 Fuselage Cover
SPECIFICATIONS
AIRCRAFT CAMERA
Dimensions (without propeller protectors):196x196x65 mm Controllable Range (Pitch): 0°-90° White Balance:Auto, Sunny, Sunrise, Sunset, Cloudy,
Dimensions (with propeller protectors): 327x327x65 mm Image Sensor:1/3.06 CMOS Fluorescent, Incandescent
Diagonal Wheelbase: 240mm Effective Pixels: 13 Megapixels Internal Memory: 16G Flash
Takeoff Weight: 385g Video Stabilization: Digital Stabilization Other: Smart Follow Me, Video Editing
Propeller Protector: Quick-Release Propeller Protector Video Modes:
Battery: 3-Cell 11.1V 1150mAh 12.715Wh Li-Po Battery • UHD-(4K) 2160p 30fps CONNECTIVITY/APP
Motor:2206 Brushless Outrunner Motor Video Downlink: 848x480p 30fps Radio Control: 5 GHz Wi-Fi
Maximum Flight Altitude: 80m (Limited by Software) • FHD-1080P 30fps with Digital Stabilization Mobile APP: Breeze Cam (available at the Apple Store and
Flight Time:Up to 12 mins Video Downlink: 720p 30fps Google play)
Max Horizontal Speed: 5m/s (Limited by Software) Required Operating System:
• HD- 720p 60fps with Digital Stabilization
Max Ascending Speed: 1m/s • iOS 8.0 or later
Video Downlink: 720p 30fps
Operating Temperature: 32°-104°F (0°C-40°C) • Android 4.2.2 or later
Photo Resolution:4160x3120
Positioning System: Indoor Positioning System +GPS Flight Range: 100m(depending on cellphone)
Photo Format:JPEG
Scene Modes: Nature, Saturation, RAW, Night Intelligent Flight Modes: Pilot, Selfie, Orbit, Journey, Follow Me
CHARGER FOV: 117°
Model: BC24803015 Exposure:-2.0-2.0
Output: 12.6V DC,1.5A
PREPARATIONS
Unfold the four landing gears as shown Install the four propeller protectors to the ・Slide in the fully charged battery until it locks.
in the below illustration. corresponding positions as shown in the ・Remove the battery by pressing the locking
illustration below. tab and sliding the battery to the rear of Breeze.
To remove the
propeller protectors,
unlock them from the
engine arm from one
side to another.
6. POWERING ON/OFF BREEZE 7. BINDING BREEZE WITH YOUR SMART DEVICE 8. FIRMWARE UPGRADE
POWER ON: To start your Breeze, press and Power on your Breeze on a flat and stable surface NOTICE: To download the latest firmware,
hold the power button at the rear of Breeze. and wait for it to complete initialization. When make sure that your smart phone/tablet
When Breeze is on, the LED indicator will blink the LED indicator blinks blue rapidly, Breeze has computer is connected to the Internet.
blue-red-green four times and emit a sound. entered the “Wi-Fi” bind mode.
When the LED indicator blinks blue rapidly, 1.Tap [ ] and select [ i ]. Tap [ ] to enter
Breeze will enter “bind” mode. the firmware upgrade interface.
2.Tap [ LOOK FOR AVAILABLE
UPGRADES ] to search for the latest
firmware.
Breeze is on (emits a sound)
METHOD 1: If you are using an iPhone or an iPad, 3.Tap [ DOWNLOAD BREEZE
CAM FIRMWARE X.X.XX ] to download the firmware.
select Settings > Wi-Fi ; NOTICE: If you have installed the latest
If you are using an Android smart phone, select firmware, a notice will pop up on screen
Settings > Wireless and networks > Wi-Fi. Select that says: "You currently have the latest
Bind mode
the network: BreezeXXXXXX and enter the firmware installed on your system”.
Password: 1234567890. 4.Tap [ NEXT ] to proceed.
POWER OFF: Press and hold the power button
until the LED glows solid red. After successfully METHOD 2: Tap [ ] and you can connect the 5.Bind your device to Breeze.
switching off, it will emit a “power off” sound Wi-Fi network directly. Select the network: Breeze 6.Tap [ UPGRADE ].
after letting go of the power button. XXXXXX and enter the Password: 1234567890. 7. Wait until upgrade is completed and
restart Breeze.
9. COMPASS CALIBRATION
NOTICE: Only calibrate the compass in open areas/fields far away from cars, power lines and other metallic surfaces/structures. Make sure that your Breeze
is placed level and about 1.5m (5ft) above the ground.
Nor th
1.5m ( 5ft )
Step1 Step2 Step3
Tap [ ] and select Drone Settings, and then swipe the screen to “Compass Calibration”.
Follow the on-screen animations to complete the calibration. Entered into Compass Calibration
The LED indicator blinks white or yellow during the whole compass calibration process, when During the Whole Calibration Process
you complete the process, the LED will blink green and Breeze will emit an audible sound. Succeeded
Recalibrate the compass if the LED blinks red as this means calibration has failed. Failed
there are five flight modes for you to select with: To bring Breeze back to the take-off point and auto land, tap
[ ]. Tap the icon again to pause returning home at any time
60 % 8
in case of emergency.
To land in the same position you are hovering, tap [ ] on the Pilot location
bottom left. Tap the icon again to pausing landing in case of SAFE
emergency. DISTANCE
4m(13ft)
RF EXPOSURE WARNING
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
IC RADIATION EXPOSURE STATEMENT FOR CANADA
This device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le
présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment.Cet équipement respecte les limites
d'exposition aux rayonnements IC définies pour un environnement non contrôlé
CE WARNING STATEMENT
Wi-Fi function of this device is restricted only to indoor use when operating in the 5150-5250MHz frequency range.
COLLECTION AND PROCESSING OF DATA
Yuneec may collect navigation information such as GPS data to help improve our products. We may also collect Depth Map information and Infrared
Image information from your drone delivered to our service center for repair and maintenance service or any other service. We may also collect
other information such as device information, server log information, etc. We may also collect personal information used in registration if you
choose to become a registered user and any other information user provided to Yuneec. We may also collect information which user send to other
users, and the recipients and senders of such information.
We reserve the right to disclose your information if required to do so by law or in the good-faith belief that such disclosure is needed to comply
with applicable laws, for example in response to a court order, judicial subpoena, warrant or request from government, or otherwise cooperating with
government agencies or law enforcement. We also reserve the right to disclose your information that we believe in good faith is necessary or
appropriate to: (i) protect ourselves or others from fraudulent, unlawful, or abusive activities; (ii) take precautions against potential liability; (iii)
protect the security of the Yuneec Apps embedded into or downloaded onto your drone or any associated equipment and services; (iv) protect the
legal rights of ourselves or any others.
Any information we collected maybe disclosed or transferred to an acquirer, successor or assignee as part of any potential merger, acquisition, debt
financing or other activities that involves transfer of business assets.
We may make the aggregated non-personal information of the users available to third parties for various purposes, including (i) complying with various
report obligations; (ii) marketing efforts; (iii) analyzing product safety; (iv) understanding and analyzing our users’ interests, habits, usage pattern
for certain functionalities, services, content, etc.
CUSTOMER SERVICE
MANUFACTURER:
Yuneec International (China) Co., Ltd.
Production Address: East Zhengwei Road No.388, Jinxi Town, Kunshan City, Jiangsu Province
DISTRIBUTOR:
CN: Youyu (Shanghai) Digital US: Yuneec USA Inc. EU: Yuneec Europe GmbH HK: 2/F,Man Shung Industrial Building,
Technology Co.,Ltd. 7 Lai Yip Street, Kwun Tong
Address: B 15F, 461 HongCao Address: 5555 Ontario Mills Address: Niklaus–Otto-Strasse 4, Kowloon,Hong Kong
Road,CaoHeJing Software Building Parkway, Ontario, CA91764, USA 24568 Kaltenkirchen, Germany. Tel:+852 3616 6071
XuHui District, Shanghai, China Tel: +1 844 898 6332 Tel: +49 4191 932620
Tel: +86 400 8207 506
*Any information above might be changed due to the software update. For the latest documents, please check the official website.