Академический Документы
Профессиональный Документы
Культура Документы
PRASATH .S
S/O SADHASAVAM.N,
14/38, KALLAKULAM,
THUDUPATHI, PERUNDURAI (TK),
ERODE (DT).
Mobile No: +91 91596 00924
Objective
My dream is to work under the modern technologies, to improve myself with more
knowledge and continue learning as the life time process.
Educational Qualification:
Month &
Degree / Institution/ Percentage
S.No. Specialization Year of
Course University / CGPA
Passing
B.E Mechanical K.S.Rangasamy May,2018 7.85
Engineering College of
1.
Technology
(Autonomous)
HSC State Board Bharathi Matric March,2014 91.16
2. Higher Secondary
School,Saralai
SSLC State Board Government Higher March,2012 86.6
3. Secondary
School,Seenapuram
Tools Experience (CAD / CAE): CATIA- v5, Creo, ANSYS, SAP & C- Programming
Present Experience:
Responsibility: INTERIOR TRIMS (IP, DOOR TRIMS) and Plastic product design,
--1 1- - 1 of 5
INTERIOR TRIMS / INJECTION MOULD DESIGN
(CATIA -V5 / ANSYS / CREO / GD & T)
Good Knowledge on plastic part Design (trims components like IP, Door Trims, Center
console & Pillars)
Creation and modification of CAD models and drawings in required CAD software (Catia-V5 /
Creo)
Target setting for parts strength, Gap-Flush, weight, BSR & regulatory requirement
Responsible for execution of given tasks with desired quality and within the given time
Responsible to follow up all the standard work procedures, methodologies etc during the works
Maintain current CAD file management practices. Learn and gain product knowledge.
To release the design data in the system as per required product data management system
within project timeline.
--2 2- - 2 of 5
INTERIOR TRIMS / INJECTION MOULD DESIGN
(CATIA -V5 / ANSYS / CREO / GD & T)
Creation of Drawings & 3D annotations with proper GD&T and datum points in Catia V5 and
Release it for Production.
Areas of Interest:
Co-curricular Activities:
Undergone implant training in”UNIQ TECHNOLOGIES” from 12th December to 16th December.
Attended a national level symposium on “National Workshop on Emission Control in Automobile
Using Renewable Fuel Technology”at K.S.Rangasamy college of Technology.
Successfully Completed NPTEL Online Courses in “REFRIGERATION and
AIRCONDITIONING”.
Attended a Quality Enhancement in Engineering Education program in the module “Kinematics
of Machinery”.
Attended a Quality Enhancement in Engineering Education program in the course “Dynamics Of
Machinery”.
Attended a Quality Enhancement in Engineering Education program in the course “Conduction
and Convection”.
Extra-Curricular
Personal Profile
--3 3- - 3 of 5
INTERIOR TRIMS / INJECTION MOULD DESIGN
(CATIA -V5 / ANSYS / CREO / GD & T)
Date of Birth & Age : 06/06/1997 & 21 years
Fathers Name : Mr.N.SADHASIVAM
Mothers Name : Mrs.S.CHITRA
Gender : Male
Nationality : Indian
Religion : Hindu
Strengths : Adaptability,Hardworking.
Hobbies : Playing Cricket.
Languages Known : Tamil,English
Date:
Place: Tiruchengode. SIGNATURE
(PRASATH S)
--4 4- - 4 of 5