Академический Документы
Профессиональный Документы
Культура Документы
2. Work to do on 11/7/2018
case 56027 (2h) - Raft design: Stay at 90% and will not continue
case 53220 (2h) - New load combination for punching slab checking
case 55983 (2h) - Beam critical region: Dimension
case 56001 (2h) - Beam critical region: Update Tabulated Report for Shear
2. Work to do on 12/7/2018
case 56043 (4h) - BS VS EC Column Moments
case 56046 (2h) - Raft design result not updated
case 56032 (2h) - Internal Error in Design Slab
case 56001 - Beam critical region: Update Tabulated Report for Shear
2. Work to do on 13/7/2018
case 56043 (2h) - BS VS EC Column Moments - check the minimum k factor
case 56001 (2h) - Beam critical region: Update Tabulated Report for Shear
case 55514 (2h) - DCH Detailing: Column passed but shown as failed
case 55511 (2h) - DCM Detailing: Column summary report error
2. Work to do on 16/7/2018
case 55193 (4h): Detailing option for DCM and DCH (beam & column ONLY)
Study on the moment capacity check (2h)
case 56086 (2h): 3D Raft/TransferSlab Contour Steel Area Band Strip Cut for Design
2. Work to do on 17/7/2018
case 56043 (6h): BS VS EC Column Moments - Explore the beta calculation
case 56035 (2h): Esteem.Tests.BatchProcess unit test fails - revised the beam
torsion design for EC2
case 56114 (2h): Pile footing report: Check for pile load
case 56085 (2h): 2D Slab Contour Steel Area Band Strip Cut for Design : study the
implementation for the design
2. Work to do on 18/7/2018
case 56139 (2h): Esteem.Tests.CodeCommon unit test fails - due to relative stiffnes
set to 0.4
case 56114 (2h): Pile footing report: Check for pile load - output checking
case 56132 (2h): Beam shear and torsion failed: Section near column support -
result checking
case 56134 (2h): Unable to re-open Raft design result - file saving problem
case 55193 (2h): Detailing option for DCM and DCH (beam & column ONLY) - critical
region dimension issue
2. Work to do on 19/7/2018
case 56043 (2h): BS VS EC Column Moments - follow up
case 55193 (4h): Detailing option for DCM and DCH (beam & column ONLY)
case 52028 (2h): Custom Parameter setting: Beam cover - updated the code
2. Work to do on 20/7/2018
case 56172 (2h): Raft not design
case 56023 (4h): Parameter usage of TBeamEffect and BeamStiffInc
case 56176 (2h): Raft, slab, flat slab Detailing based on Steel area contour
2. Work to do on 23/7/2018
case 55193 (3h): Detailing option for DCM and DCH (beam & column ONLY)
case 56147 (1h): Top element stiffness calculation for wall - BS 8110
case 56176 (4h): Raft, slab, flat slab Detailing based on Steel area contour
2. Work to do on 24/7/2018
case 51101 (2h): Column Design Report for DCM Selected - Exception thrown when open
column full report
case 56023 (2h): Parameter usage of TBeamEffect and BeamStiffInc - check the Ec
usage
case 56176 (4h): Raft, slab, flat slab Detailing based on Steel area contour -
create a button and create data class to keep the As value
2. Work to do on 26/7/2018
case 56176 (7h): Raft, slab, flat slab Detailing based on Steel area contour
case 56230 (1h): Seismic EC8: capacity check (for checking purpose) - study the
specification
2. Work to do on 27//2018
case 54573 (2h): Pad footing detailing comments from Ir Anthony
case 54618 (2h): Revise flexural shear check for pile cap design
case 56176 (4h): Raft, slab, flat slab Detailing based on Steel area contour
2. Work to do on 30//2018
case 53068 (2h): Raft Punching Shear Design for Floor based slab - result
verification
case 56176 (4h): Raft, slab, flat slab Detailing based on Steel area contour -
create the raftslab span class
2. Work to do on 31/7/2018
case 53068 (1h): Raft Punching Shear Design for Floor based slab - result
verification - done
case 56254 (2h): Critical region detailing not shown - fixed
case 56147 (1h): Top element stiffness calculation for wall - fixed
case 56176 (6h): Raft, slab, flat slab Detailing based on Steel area contour -
create the raftslab span class
2. Work to do on 1/8/2018
case 56176 (8h): Raft, slab, flat slab Detailing based on Steel area contour -
create the raftslab span class
2. Work to do on 2/8/2018
case 56176 (8h): Raft, slab, flat slab Detailing based on Steel area contour -
create the raftslab span class
2. Work to do on 3/8/2018
case 56175 (2h): Column drop profile overlap with beam
case 56176 (6h): Raft, slab, flat slab Detailing based on Steel area contour
2. Work to do on 6/8/2018
case 56175 (4h): Column drop profile overlap with beam
case 56172 (2h): Raft not design
case 56176 (2h): Raft, slab, flat slab Detailing based on Steel area contour
2. Work to do on 8/8/2018
case 56350 (6h): study on flat slab design
case 56230 (2h): Seismic EC8: capacity check (for checking purpose)
2. Work to do on 9/8/2018
case 56350 (8h): study on flat slab design
2. Work to do on 10/8/2018
case 56175 (1h): Column drop profile overlap with beam
case 55193 (3h): Detailing option for DCM and DCH (beam & column ONLY)
case 56382 (3h): New parameter : Geometric Imperfection
case 56230 (1h): Seismic EC8: capacity check (for checking purpose)
2.Work to do on 13/8/2018
case 56411 (2h): Esteem.Tests.BatchProcess unit test fails
case 56423 (4h): Create data to store soil pressure in 2D & 3D raft
case 56176 (2h): Raft, slab, flat slab Detailing based on Steel area contour -
column drop top bar class
2.Work to do on 14/8/2018
case 56423 (1h): Create data to store soil pressure in 2D & 3D raft
case 56374 (4h): Revise the torsion design in EC2
case 56176 (3h): Raft, slab, flat slab Detailing based on Steel area contour
2.Work to do on 15/8/2018
case 56382 (2h): New parameter : Geometric Imperfection - report revision
case 56176 (4h): Raft, slab, flat slab Detailing based on Steel area contour
case 56483 (2h): Corbel design
1.Work done on 15/8/2018
case 56382 (2h): New parameter : Geometric Imperfection - report revision -
implemented
case 56176 (4h): Raft, slab, flat slab Detailing based on Steel area contour -
create the span class
case 56483 (2h): Corbel design
2.Work to do on 16/8/2018
case 56491 (4h): Raft : Empty Failed Report
case 56176 (4h): Raft, slab, flat slab Detailing based on Steel area contour -
create the top span class
2.Work to do on 17/8/2018
case 53068 (2h) : Raft Punching Shear Design for Floor based slab
case 55193 (2h) : Detailing option for DCM and DCH (beam & column ONLY)
case 56323 (2h) : New Parameter: Seismic Detailing Style
case 56490 (2h) : Beam detailing DCM: COB
2. Work to do on 21/8/2018
case 56176 (4h) : Raft, slab, flat slab Detailing based on Steel area contour
case 56517 (4h) : BS8110 Punching Shear
2. Work to do on 27/8/2018
case 56580: Raft design should proceed if column is sitting on beam
case 55193: Detailing option for DCM and DCH (beam & column ONLY)
Please refer to columns (2,C) and (3,B). Both is to provided with 1.26mm^2/mm shear
and torsion link, but the Seismic Detailing for column (2,C) is 2T10-100, but (3,B)
is only T10-100.
case 56323: New Parameter: Seismic Detailing Style
Please update the clause for the column DCH seismic detailing report too
2. Work to do on 28/8/2018
case 56176 (3h) : band strip cut detailing - do the bar labelling
case 56517 (3h) : BS8110 Punching Shear
Detect the column perimeter in polygon shape
case 56498 (2h) : 2D Precast, PC Beam Connection/Corbel Detailing
2. Work to do on 29/8/2018
case 56176 (4h) : band strip cut detailing - do the top bar and bottom labelling
case 56517 (4h) : Punching Shear engine
2. Work to do on 30/8/2018
case 55193 (2h) : Detailing option for DCM and DCH (beam & column ONLY)
case 56501 (3h) : Punching Shear Check based on EC2 Seminar dated 7 Aug 2018
case 56176 (3h) : band strip cut detailing - label the graph value and create
points for AsProv
2. Work to do on 3/9/2018
case 56501 (7h) : Punching Shear Check based on EC2 Seminar dated 7 Aug 2018
Collect the 2D and 3D column moment (in progress)
2. Work to do on 4/9/2018
case 56501 (7h) : Punching Shear Check based on EC2 Seminar dated 7 Aug 2018
link the result to compute beta value
2. Work to do on 5/9/2018
case 56501 (7h) : Punching Shear Check based on EC2 Seminar dated 7 Aug 2018
compute the slab are load and reporting presentation
2. Work to do on 6/9/2018
case 56501 (7h) : Punching Shear Check based on EC2 Seminar dated 7 Aug 2018
full reporting and summary reporting presentation
2. Work to do on 7/9/2018
case 56501 (7h) : Punching Shear Check based on EC2 Seminar dated 7 Aug 2018
full reporting and summary reporting presentation
2. Work to do on 8/9/2018
case 56501 (4h) : Punching Shear Check based on EC2 Seminar dated 7 Aug 2018
test on beta value for punching shear
case 56409 (4h) : Add Slab point load's "Dimension" & "Moment Factor"
2. Work to do on 12/9/2018
case 56580 (2h) - Raft design should proceed if column is sitting on beam - fix the
detailing profile
case 56382 (2h) - Geometric imperfection - result verification
case 55193 (2h) - Detailing option for DCM and DCH (beam & column ONLY) - curve
beam
case 56409 (2h) - Add Slab point load's "Dimension" & "Moment Factor"
2. Work to do on 13/9/2018
case 53068 (2h) - Raft Punching Shear Design for Floor based slab - check the soil
pressure value
case 53220 (2h) - New load combination for punching slab checking - check the
moment value for new EC load combination
case 56671 (2h) - Pad footing: Top Bar diameter
case 50501 and case 56517 (2h) - create the shear reinforment design methods
1. Work done on 13/9/2018
case 53068 (2h) - Raft Punching Shear Design for Floor based slab - check the soil
pressure value - find the soil pressure for every load case instead of using
minimum soil pressure
case 53220 (2h) - New load combination for punching slab checking - check the
moment value for new EC load combination - verify the moment value for new EC load
combination
case 56323 (2h) - When Ductility Class is DCM or DCH, it should ignore Seismic
Detailing setting. - implemented
2. Work to do on 14/9/2018
case 56671 (2h) - Pad footing: Top Bar diameter
case 56672 (2h) - Pile top bar: Diameter and spacing
case 56728 (2h) - Column DCM/DCH report: Highlight failure in Table of Contents
case 50501 and case 56517 (2h) - create the shear reinforment design methods
2. Work to do on 18/9/2018
case 56501 (4h) : Punching Shear Check based on EC2 Seminar dated 7 Aug 2018
case 53068 (2h) : Raft Punching Shear Design for Floor based slab
case 53220 (2h) : New load combination for punching slab checking
2. Work to do on 20/9/2018
case 56767 (2h) : Pad/Pile : Side bars
case 55849 (2h) : Column Full Report - revise report
case 56501 (4h) : Punching Shear Check based on EC2 Seminar dated 7 Aug 2018 -
working on the shear reinforcement design for punching shear
2. Work to do on 21/9/2018
case 55193 (2h) : Detailing option for DCM and DCH (beam & column ONLY) - The
calculated critical region length is 750mm. But detailing shows otherwise
case 56323 (2h) : New Parameter: Seismic Detailing Style - When Ductility Class is
DCM or DCH, it should ignore Seismic Detailing setting.
case 56501 (4h) : Punching Shear Check based on EC2 Seminar dated 7 Aug 2018 -
working on the shear reinforcement design for punching shear
2. Work to do on 24/9/2018
case 56501 (4h) : Punching Shear Check based on EC2 Seminar dated 7 Aug 2018 -
working on the shear reinforcement design for punching shear
case 56517 (4h) : BS8110 Punching Shear
2. Work to do on 25/9/2018
case 56501 and case 56517 (8h) : Punching Shear Check based on EC2 and BS 8110 :
Testing on engine and reporting
case 55849 (1h) : Column Full Report - release to customer version
2. Work to do on 26/9/2018
case 56804 (4h) : DCH beam detailing: Transfer beam critical region
case 56501 and case 56517 (4h) : Punching Shear Check based on EC2 and BS 8110 :
Code for the column drop checking
2. Work to do on 27/9/2018
case 56501 and case 56517 (8h) : Punching Shear Check based on EC2 and BS 8110 :
Code for the column drop checking
2. Work to do on 28/9/2018
case 55543 (2h) : Spec revision on effective length calculation for Wall
case 55849 (2h) : Column Full Report
case 56501 and case 56517 (8h) : Punching Shear Check based on EC2 and BS 8110 :
Code for the column drop checking
2. Work to do on 4/10/2018
case 56884 (1h) : A gap between 2 zones that provide the same link
case 56501 and case 56517 (7h) : Punching Shear Check based on EC2 and BS 8110 :
Code for the raft checking (continue)
1. Work to do on 5/10/2018
case 55849 (2h) : Column Full Report
case 56501 and case 56517 (6h) : Punching Shear Check based on EC2 and BS 8110 :
Code for the raft checking (continue)
2. Work to do on 8/10/2018
case 56931 (2h) : raft : column not designed
case 56501 and case 56517 (6h) : Punching Shear Check based on EC2 and BS
2. Work to do on 10/10/2018
case 56953 (2h) : TOC of Beam opening full report
case 56501 and case 56517 (6h) : Punching Shear Check based on EC2 and BS : work on
detailing
2. Work to do on 11/10/2018
case 56402 (2h) : Design> Pad: Show Top Bar parameter move to Detailing parameter
case 56931 (2h) : Raft : Column not designed
case 56501 and case 56517 (4h) : Punching Shear Check based on EC2 and BS : work on
detailing
2. Work to do on 12/10/2018
case 56501 and case 56517 (4h) : Punching Shear Check based on EC2 and BS : work on
detailing
2. Work to do on 16/10/2018
case 54049 (4h) : DCM: wall boundary condition check
case 56501 and case 56517 (4h) : Punching Shear Check based on EC2 and BS : work on
detailing
2. Work to do on 18/10/2018
case 57062 (2h): Seismic: Normalised axial force check
case 57031 (4h) : Envelope Bending Moment Diagram for Seismic Design of r/c Walls
case 56501 and case 56517 (2h) : Punching Shear Check based on EC2 and BS : work on
detailing
2. Work to do on 24/10/2018
case 56501 and case 56517 (4h) : Punching Shear Check based on EC2 and BS
case 57114 (4h) : Post-Analysis Interactive Design
2. Work to do on 29/10/2018
case 57146 (0.5h): Esteem.Tests.BatchProcess unit test fails
case 57163 (0.5h): Esteem.Tests.RCWallDetailing unit test fails
case 57163 (0.5h): Esteem.Tests.Slab unit test fails
case 56402 (2h): Design> Pad: Show Top Bar parameter move to Detailing parameter
case 56403 (2h): Design> Pile: Show Top Bar parameter move to Detailing parameter
case 56501 and case 56517 (4h) : Punching Shear Check based on EC2 and BS
2. Work to do on 30/10/2018
case 56501 and case 56517 (4h) : Punching Shear Check based on EC2 and BS
case 57114 (4h): Post-Analysis Interactive Design : Colum drop
2. Work to do on 31/10/2018
case 57114 (8h): Post-Analysis Interactive Design : foundation design
Work to do on 13/12/18:
case 57374 (2h): Deflection check : Additional Message
case 57225 (2h): Flat Slab & Transfer Slab: Failed Element list for punching shear
checking
case 56403 (2h):
Design> Pile: Show Top Bar parameter move to Detailing parameter
case 48027 (2h): Esteem 9 to Etabs
case 48564: column moment capacity design DCM and DCH - 1.3
case 51119: beam shear capacity design DCM - 1.0 and DCH - 1.2