Академический Документы
Профессиональный Документы
Культура Документы
Cubierta
precintable
Sealable cover
320 320
ø 350
Bornes BT M6 (Máx.8 bornes)
Secondary terminals M6
350
(Max.8 terminals)
305
S1 X1 S2 X2
Simple Relación Simple Primary Ratio
Primaria y dos and two secondaries
secundarios
P1 P2
H1 H2
S1 X1 S2 X2 S3 X3
Dimensiones aproximadas en mm • Approximate dimensions in mm
DESCRIPCION DESCRIPTION
Transformador de intensidad, tipo toroidal, diseñado para servi- Current transformer, toroidal type, valid for indoor service, cast
cio interior, encapsulado en resina. Para medida y/o protección. resin. Designed for measurement and/or protection.
Construibles bajo normas UNE, CEI, VDE, IEEE. Manufactured as per standard UNE, IEC, VDE, IEEE.
Otras normas o características especiales bajo consulta. Other standards or special technical specification on request.
TRANSFO. INTENSIDAD ABD 36 CURRENT TRANSFORMER
CARACTERISTICAS ELECTRICAS ELECTRICAL CHARACTERISTICS
UNE•IEC IEEE
•Tensión nominal de aislamiento (kV) 36 34,5 •Highest voltage (kV)
•Tensión máxima de servicio (kV) 36 36,5 •Highest voltage for equipment (kV)
•Frecuencia de utilización (Hz) 50/60 •Frequency (Hz)
•Tensión de ensayo a frecuencia industrial •Test voltage at industrial frecuency
(durante 1 min) (during 1 min)
- Entre primario y secundario, este unido a masa (kV) 70 70 - On the primary and secondary (kV)
- Entre secundario y masa (kV) 3 2,5 - On the secondary winding (kV)
•Ensayo impulso tipo rayo (kV cresta) 170 200 •BIL and full wave (kV crest)
•Intensidad primaria máxima (A) •Highest primary current (A)
- Simple Relación Primaria 5000 - Simple Primary Ratio
•Intensidad secundaria (bajo pedido 1 ó 2 A) 5A •Secondary current (1 or 2 A on request)
•Número de núcleos máximo •Number of cores
•Sobreintensidad admisible en permanencia (IN) 1,2 •Maximum continuous cur rent (IN)
•Máxima corriente térmica admisible durante 1 seg. (kA) 96 •Maxim. (Shor t-time) thermal current during 1 sec. (kA)
CARACTERISTICAS MECANICAS MECHANICAL CHARACTERISTICS
•Par de apriete de la tornillería •Torque
- Tornillo M 6 0,3 m x kg - Screw M 6
•Peso aproximado 100 Kg •Aproximate weight
•Borne de tierra de acero (cincado y bicromatado) •Ground terminal made of steel (zincked and bi-cromated)
•Cubierta bornes secundarios de policarbonato •Secondary terminals cover made of policarbonate.
Bajo pedido se pueden suministrar de acero cincado y Can be supplied made of zincked and bi-chromed
bicromatado. steel on request.
PRESTACIONES SERVICES
ISO 9001