Академический Документы
Профессиональный Документы
Культура Документы
similarly labelled with the appropriate instructions including the grade of oil or grease to be
used.
1.7.11 Tools and Spare Parts
Tools and Spare Parts shall be supplied by the contractor as required in the Particular Specifica-
tions.
77
15650-22
required for the HVAC services and all associated electrical and other services shall be
provided whether such works are mentioned in the Specification or shown on the drawings or
not. All builder's work shall be made to match the design of the buildings.
The contractor shall provide reinforced concrete foundations for all floor mounted equipment
and machinery. All concrete foundations shall be constructed of concrete as specified under
"Concrete Work." Foundations shall be poured in plywood forms and exposed surfaces shall be
finished with cement mortar trowelled smooth.
Foundations shall be designed to fit the shape of the complete base and shall conform to the
contour designated by the manufacturers. All necessary anchor bolts, washers, templates etc.
shall be furnished complete and bolts shall be built into foundations with proper size sleeves.
Necessary supports shall be provided by the Contractor for plant, equipment, apparatus, piping,
valves, duct and all other works as required. These shall include frames or supports for
compressors, pumps, valves, air-handling units, fans, coils, dampers and other similar items
and plant requiring supports and hangers for pipes, ducts conduit cable tray etc. Support
structures shall be constructed of rolled steel sections of adequate strength bolted or welded
together and painted with two coats of lead primer. Unless otherwise specified, welding of
supports to the building structure steelwork shall not be permitted.
All methods of anchoring and fastening to building structure shall be detailed and submitted for
approval.
Vibration isolation units shall be provided to minimise the intensity of vibration and noise to the
building structure as specified.
1.13 Protection
The Contractor shall protect all pipework, valves, fittings, ductwork, plant and equipment where
any part or parts of the installation are liable to damage from other trades or any cause
whatsoever.
The Contractor shall take all due care to screen and protect all works, whether complete, or in
course of completion from the ingress of dust or moisture or from damage by any other means.
Any open ended pipes left overnight or for a similar period shall be plugged with approved type
plugs to prevent the entry of dust, sand, etc.
Pipework, fittings, valves or any plant and equipment which shall be found to be unduly marked
by tools or damaged or distorted will be rejected by the Engineer and immediately replaced by
the Contractor at his own expense.
78