Chief Engineer (H), NABARD & Rural Roads, Chennai - 25
For the year - 2018 - 2019 - (w.e.f - 01.06.2018)
Model_ Data for Centering
DATA FOR CENTERING WORKS
1a)
| [Sieel centering for sides and softs neiuding supports and struling Tor plane surface
| ‘such as RCC slab, rectangular beams, T or L beams lintel blocks, staircase waist and
landing slab, landing beams, canopy otc, with all cross bracings using mld. steel
i sheets of size 90cm x GOcm x 10 gauge stiffened with welded mildsteel angles of size
| 25 x 25 x Gmm for boarding laid over siver oak (country wood) joists of size cm x|
6.50 cum (spaced at about 90 cm cfc) and supported by casurina props of 10 - 13 em
aia (spaced at 75 cm cle) complete.
j ‘Sub-Data- (1) |
[cost of Ms sheets and anges foreach set |
[Weight of N.S sheet 900m x Bem x 100 = 24.924 Kgfoqm
| 3.175 x 7850 / 1000
| 5 .600m x 0.600% x 24-62 1348 kgtsam
[Weight of MS Angle of size 28 x 25 x 3mm 400
[3.60m x 1.11kgim i
13.460 Kg Cost of M.S sheets. (Si. item No. #71) 4050 | Kg 545.13
400. Ka. [Cost of Angloot size 26 x25 x 3mm Faas | ka | 6200
[GGL tem No, 112) | IEEE
17.46 | Kg Add for cutting, bending & welding 29.40 | Kg 1508.09
| [81s 168.2) i
' Sundries o.78|
Lo TOTAL! i 1216.00
‘Sub-Data- (2)
[Gost oF MS angles and Angles and Siver oak 7000] Sqm
| |eountry wood joists tom x 6.5cm at about 90 em |
centre to centre etc. i
19 | Nos, (Cost of M.S angles and Sheet [A] | 1216.00 | Each | 23103.82
is || aateaee
| Cost for single use | -Bt0a92 40 77.0]
0.42 | cum /Siiver oak country wood joists fem. Somat! 1484700 Cum 1781.64
| ‘about 80 em centre to centre etc (Sch. Item No.| |
| \77D)
bee ae | renee | sai
| ISteet prope 40% 11.40%6/40 for tuse | 782.60
| | 1088.93)
|Cost for single use | pe lt0se.93
MAIN DATA
100 | Use [Cost of M.S shecls and angles cost 37780) B77
4100"| Use oat of sive ok ji sze (10x cn a @0 cm) 088 93 j 1088.93
| Jeontre 4 use i |
|Add 036 for corporation area | i
3.8 | Nos. (Carpenter ist class. (Si. tem No. 14) Rs.655.00 | Each 2109.00)
84 | Nos. azdoor tet class. (Sem No. 394) | Rs.386.00 | Each | 4917.00}
1.0 | Nos. ‘Fitter 2nd class, (Si, item No. 191) Rs467.00 | Each 487.00
10f3"hd far Gling for MS sheet and edges. TS
: Sundries, | 0.8
Total ! 6215.00|/10 sqm
Rate Port sam fal) Above SillLever]| 621 50|7sam
‘Steel centering for foundation of retaining wail, Abuiments, Piers, Bed Block cum Dirt wall ove]
‘Abutments, Crash barrier, Base Course below Approach slab and Approach slab.
4.00 | Sqm ‘Centering ate 6621.50 | Sqm] 624.60
Deduct for strutting charges | | 1108.89]
i Below Sill Level:| 512.64
| Centering for Vertical Surfaces 1 :
400 | Sam (Gentering rate Rs.621.60 | Sam) 62.50]
| | 10% Extra for Vertical surface | RS62I5 | Sam) 62.15}
| LS Sundries eee | 0.35}
Total 5 g6.00
i Re. 654.00 |
| Gontering for Per Column |
4.00 | Sqan Centering rate Rs621.80 Sqm] 624.60)
| 100% Extra for Vertical eurface Rs62150 | Sqm | 621.60
LS Sundries Ls |
Total j T2H8.00
| contering for capping Boum. Ped
7.00 | Sqm ‘Centering rate | Rs621.50 | Sqm 621.50
| 150% Extra for Vertical surface | Rs910.76 | Sqm 310.76
PLS” sunaties fois O78
Total 933.00
4118) DATA FOR CENTERING WORKS eee
Slee! centering for sides and soffis incuding supports and sailing Tor plane surface such a3]
RRCC slab, rectangular beams, "7" or” beams lintel blocks, stalicase waist and landing sia,
llanging beams, canopy ete., wth all ross bracings using mild steel sheets of size SOcm >|
‘60cm x 10 gauge sifered with welded mildsteel angles of size 25 x26 x Gmm for boarding lag
cover silver oak (country wood) joists of size 10cm x 6,60 cum (spaced at about 90 om clc) and
supported by casuins pop of 10-19 en da (spaced a 75 cm cl) compte Fer Decaab 8
Sub-Data-(1)
‘cost of M.S sheets and angels for each set. q
‘Weight of M.S sheet’ 9Gcm x 60cm x 100 24.924 Kg/Sqm
3.175 x 7850 /1000
i 900m x 0.600m x 24.92 i 13.46 Kg/Sq.m
Weight of MS Angle of size 26x25 x3mm |
{60m x 1.14K g/m 4.00
4840 | Kg ‘Cost of M.S sheets. (6. lem No, 111), 4050 Kg 545.19
4.00 | Kg [Cost of Angleof size 26 x 28 x 3mm. 14060) Kg 462.00
(St tem No, 112)
17.46 Kg Add for cutting, bending & welding 5% 29.10 | Kg 508.09)
(SI, No. 168 R-2)
| ‘Sundries. | 0.78)
| TOTAL, 7316.00
20f3‘Sub-Data- (2)
| [Oost of M.S angles and Angles and Siver oak 1000) Sqm
| leounty wood joisis tem x 6:Sem at about Oem
| Jeentre to conte ee
19°) Nos. [Cost of anges and Sheet A] 121600 | aon} 2310399
| Cast for singlo use 25109.92,40 | 877.80
0.12 | Culm Siver oak county wood joists tem x 6.50m at} 1484700 Cum) 1784.64
| about 90 cm centre to centre etc, (SI. Item No. i
(77D)
[Fert use ( aret 46 36.39
|| Size orbs 060m x 080m x4 20m t i
| Grids 38 x 100.60 40 | | [$840.09
| ‘Cross bracings 2 x 19.20m x 11.10m x 66 / 40 I 703.30)
| |cost for single use | raf 6958.57
MAIN DATA.
100 | USS eos oFTAS shoals and angles oat [ae] ar
4.00 Use |cost of ever ak joists and steel props | sseaez | 560
38° | Wos. ‘Carpenter Yat dass. (I item No 11) Re685.00"” Each | 210800
84” | Nos. |Mazdoor tet cass. (tem No, 8A) Rs.388.00 | Each | 1947.00
40 fos. Fer 2rd clas. (ot No. 198) | Rese700 | Eaen aera
‘Add for welsing gil, nals ee. eee 3.00]
[i or Ong or sheet an edges is | wes
|sundiies 0.13)
| Total | | 42426 00]
[ate Pert sam at : [72%]
| Centering for Deck Sia | |
120 | Sam Conoing te | Rstai2w | sam | r2r28d
| (0% Extra for Vertical surface R000 Sqm! 0.00]
[ts Sands boos oso]
| Total EEK)
ical | Loud
| ‘Centering for T-beam Girders | |
4.00 | Sqm |Centering rate Rs121260 Sqm 1212.60
|20% ita for Vertical surface Rs.242.60 | sain’) 242.80
LS sundries Ls
| Total | 1A85.00
110 sqm
sqm
30f3