Вы находитесь на странице: 1из 3

Palm Springs Pull

PALM SPRINGS PULL Specifications


Front Pull
2.50 1.88

1.50 .5 dia post

16.88 13.75

Rear Pull To install the Palm Springs


door pulls, use the REAR
2.50 pull as a template to mark
the holes for the pulls.
Gently place the rear pull
on the front of the door.
The bottom of the pull
should be 33 1/2 from the
33 1/2 bottom of the door and the
pull should be approx. 11/4
inches from the edge.
13.75 16.88 Mark the holes with a pencil
The bottom of the pull
VERSION
once you’re certain of the
should be 33 1/2 from
placement. Drill a small
the bottom edge of
pilot hole first, the use a
the door. Avoid
9/16 drill bit to drill the
placing the door pull
3

holes for the front pull


too close to the edge
posts. Put the front pull in
03

of the door. Placing


place and fasten the rear
the pull too close to
pull from the back using the
2017

1.50 the edge can damage


screws provided.
both door and pull.
2 RUSTICAHARDWARE.com
WE LOVE WHAT YOU ARE
DOING WITH THE PLACE
CONGRATULATIONS ON YOUR DECISION TO BRING HOME
AN AMERICAN MADE PRODUCT OF THE HIGHEST QUALITY.
WE HOPE YOUR Palm Springs Pull BRINGS ART AND FUNCTION
INTO YOUR LIFE.

Designed and crafted


entirely in the

U.S.A.

don’t be a stranger. follow us


on social media.

support@rusticahardware.com

Вам также может понравиться