Академический Документы
Профессиональный Документы
Культура Документы
Name of Work: Repairing & Renovation of SC for Upgradation to Health & Wellness
Name of the
Bidder/
Bidding Firm /
Company :
PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is lia
and Values only )
1 2 4 5 13
1 Demolishing brickwork including stacking of 35.250 Cum
serviceable materials and disposal of unserviceable
materials as directed for all levels
2 Earth/Sand filling in plinth in layer not more than 150 18.650 Cum
mm thick including necessary
carriage,watering,ramming etc. complete as directed
and specified including payment of land
compensation, Forest Royalty, Sales Tax and other
duties and taxes as may be necessary (With river
sand or silt by truck carriage including loading and
unloading)
3 Plain cement concrete floor base in prop1:3:6 laid in 18.562 Sq.m
alternate bays as specified with coarse agg. of size
13mm to 32mm including dewatering if necessary,
and curing etc. complete.
35mm thick
5 Providing and laying 25mm thick damp proof course 2.320 Sq.m
with cement concrete in prop 1:1.5:3 with graded
stone agg. of 10mm down nominal size including
providing approved damp proof admixture in
proportion as recommended by the manufacturer
including curing etc. complete as directed.
6 Providing form work of ordinary timber planking so as 18.520 Sq.m
to give a rough finish including centering, shuttering,
strutting and proping etc. height of propping and
centering below supporting floor to ceiling not
exceeding 4.0 m and removal of the same for in-situ
reinforced concrete and plain concrete work. Flat
Surfaces such as soffits of suspended floors, roofs,
landings, cantelever slabs, chajjas, balconies and the
like.
Using 25mm thick plank
8 Brick work in cement morter with 1st class brick 2.865 Cum
including racking out joints and dewatering if
necessary, and curing complete as directed in
substructure upto plinth level (in prop.
1:4 )
9 112 mm thick 1st class brick nogged wall in cement 52.250 Sq.m
mortar including racking out joints and curing
complete as directed in super structure above plinth
up to 1st floor level (protruding M.S rod/Tor steel of
column to be embeded in cement mortar and will be
measured and paid separately)(a). In cement mortar
in proportion 1:4
(1 cement : 4 sand)
19 Providing and fixing flush door shutters solid core 8.000 Sq.m
construction with frame of 1st class hard wood with
cross band and face veneered ply wood face panels
conforming to relevent I.S code including oxidised
iron butt hinges (100mm x 75mm x 3.5mm) 6 nos
with necessary wood screws. b) Non decorative
type and block board core.(35mm Thick)
20 Providing,fitting and fixing anodised aluminuim 1.352 Sq.m
framed glazed doors with anodised aluminium frame
made of 63mm x 38mm x 2.5mm section of approved
brand with door style of size 50mm x 45mm x 2.0mm,
top rails 50mm x 45mm x 2.5mm, middle rail 100mm
x 45mm x 2mm and bottom rails 100mm x 45mm x
2.5mm fitted with glazing clip, special type rubber
gasket complete including hydraulic floor spring,
pivot, tower bolt in each leaf, aluminium door handle,
lock, angles, cleat etc complete as specified and
directed by the department at all levels.(iv)
Prelaminated Board
21 Providing, fitting and fixing anodised aluminium 12.210 Sq.m
windows and ventilators of standard sections of
approved brand without horizontal glazing bars joints
mitred and welded (manufactured to relevant IS
specifications) fitted with 6mm x 3.15mm lugs
100mm long embedded in CC blocks 150mm x
100mm x 100mm in 1:3:6 mix including providing and
fixing handles, frictions stays, joining cleat, bolting
device, locking arrangement, spring catch as required
complete as specified and directed for all levels.
(Cement concrete to be measured and paid
separately) a)Side hung and Top hung windows and
ventilatorsi) 6 mm clear glass
28 Providing two coats of J.K Wall Putty ( White Cement 125.000 Sq.m
based putty for concrete/ mortar walls and ceiling
both internal and external) after removing all loosely
adhering material from the wall surface with the help
of emery stone, putty blade or wire brush and
moistening the wall with sufficient quantity of clean
water as specified and directed by the department.
32 Painting one coats on old G.C.I sheets with ready 220.000 Sq.m
mixed anticorrosive paint of approved brand and
shade suitable for painting over G.C.I sheets to give
an even shade including the cleaning the rust
patches with emery paper, dust ,dirt, grease and
other foreign matter with water complete.
33 Extra over item no.32 for every subsequent coat of 220.000 Sq.m
paint
34 Applying priming coat over new wood based 75.500 Sq.m
surfaces up to 100mm in girth/width after and
including preparing the surface by throughly cleaning
oil, grease, dirt snd other foreign matter , sand
papering and knotting.(a) With ready mixed paint ,
Wood primer (pink)
52 Labour for sinking tube well with 40mm (internal) dia 50.000 R.M
G.I. Pipes up to having strata, having potable water
including fitting and fixing strainer hand pump and
other accessories as directed complete as in any soil.
53 Supplying fitting and fixing ISI approved PVC filter 2.000 Each
3.00 metre long.
54 Supplying, fitting and fixing lift and force Maya hand 4.000 Each
pump of approved with all accessories complete as
directed by the Department..
61 Brick work in cement morter with 1st class brick 4.320 Cum
including racking out joints and dewatering if
necessary, and curing complete as directed in
substructure upto plinth level ( in prop. 1:4 )
62 112 mm thick 1st class brick nogged wall in cement 4.160 Sq.m
mortar including racking out joints and curing
complete as directed in super structure above plinth
up to 1st floor level (protruding M.S rod/Tor steel of
column to be embeded in cement mortar and will be
paid seperately.
63 Providing and laying plain/reinforced cement 0.120 Cum
croncrete works in prop 1:2:4:(1 cement :2 coarse
sand :4 graded stone aggregate, 20mm down )
including dewatering if necessary, and curing
complete but excluding cost of form work and
reinforcement. Foundation, footing, columns with
base tie and plinth beam, pile cap, base slab,
retaining walls, walls of septic tank, inspection pit and
the like and other works not less than 100mm thick
up to plinth level.
74 Providing, fitting and fixing recessed soap tray / soap 16.000 Each
dish complete as directed and specified (i) Jaquar
Make (a) Continental (Cat.No.ACN-1331N)
78 Supplying fiting and fixing 87.5 degree PVC bend 24.000 Each
with door of (Supreme/Prince) or other ISI
approved including joining , fitting and fixing etc. as
necessary complete at all levels including below G.L.
as directed and specified. In exposed
faces or trences 75mm dia.
79 Supplying fiting and fixing PVC Plain single tee of 8.000 Each
(Supreme/ Prince) or ISI approved including joining,
fitting and fixing etc. as necessary complete at all
levels including below G.L. as directed and specified.
In exposed faces or trences
110mm dia.
80 Supplying fiting and fixing PVC Plain single tee of 12.000 Each
(Supreme/ Prince) or ISI approved including joining,
fitting and fixing etc. as necessary complete at all
levels including below G.L. as directed and specified.
In exposed faces or trences
75mm dia.
81 Providing, fitting and fixing C.P. Grating to the floors 20.000 Each
complete as directed and specified.
(ii) 110mm dia
82 Providing and fixing Chlorinated Polyvinyle Chloride 80.000 R.M
(CPVC) Pipes, having thermal stability for hot and
cold water supply including all CPVC plain and brass
threaded fittings i/c fixing the pipe with clamps at
1.00m spacing. This includes jointing of pipe
Exposed or in trenches c) 25 mm
nominal outer dia pipe
85 Supplying fitting and fixing C.P. bib cock 15mm dia of 32.000 Each
approved brand directed and specified. (G.I. & C.P
pipes will be measured separately) Jaquare make
Continental /Clarion Standard
86 Supplying and placing plastic cylindrical vertical 4.000 Each
claused top (PCVC) tank of Sintex/ Polycon/Patton
make over the stagging with manhole cover with
locking and cleaning arrangement including providing
pads of size as required for inlet and outlet pipes
complete as directed.500 litre capacity (b) Polycon
make
87 Supplying and erection PSC pole 8.5 metre long, the 8.000 Each
pole is to be erection in 1:2:3 plain cement concrete
foundation of size 1.50 m x 0.45 m x 0.45m having
P.C.C base foundation 15 cm x 60 cm x 60cm
including edge brick soiling and plastering above G.L.
portion (0.30 metre complete with excavation of
earth, handling of Surplus Soil, debris etc. to the
proper place and refilling etc. as specified and as
directed by the department.
89 Supplying and erection of L.T. Pin insulators with G.I. 8.000 Each
pin complete with blots and nuts coach screw etc. as
required and as directed by the department.
90 Supplying and erection of L.T. Shackle insulators with 8.000 EACH
shackle strap complete with blots and nuts coach
screw etc. as required and as directed by the
department.as required
94 supplying fitting & fixing static watt hour meter single 4.000 NOS
phase 220/230 volts 50Hz including supplying &
fitting required size of meter box digital meter
(richa/Bentec)
103 Wiring for drawing sub-main line with P.V.C. insulated 8.000 R.M
single core unsheathed industrial (Multistrand) cable
FR conforming to IS-694: 1990 with flexible bright
annealed electrolytic copper conductor for voltage
grade up to 1100 volts (Finolex /RR Kabel /Nicco /
Anchor or Equivalent Make as approved by the
Deptt.) in surface flat ISI marked casing 'n' capping
(AKG / Precision/ Presto Plast/Polycab/ MW or
equivalent make as approved by the Deptt.) system
including earth continuity. With 2 x 2.5 sq. mm. +
earth continuity with 1x1.5 sq. mm. in flat 19 mm ISI
marked casing 'n' capping system
104 Wiring for drawing sub-main line with P.V.C. insulated 80.000 R.M
single core unsheathed industrial (Multistrand) cable
FR conforming to IS-694: 1990 with flexible bright
annealed electrolytic copper conductor for voltage
grade up to 1100 volts (Finolex /RR Kabel /Nicco /
Anchor or Equivalent Make as approved by the
Deptt.) in surface flat ISI marked casing 'n' capping
(AKG / Precision/ Presto Plast/Polycab/ MW or
equivalent make as approved by the Deptt.) system
including earth continuity. With 2 x 4.0 sq. mm. +
earth continuity with 1x2.5 sq. mm. in flat 19 mm ISI
marked casing 'n' capping system.
106 Supplying with fitting and fixing sheet steel, 8.000 EACH
phosphatised, powder painted dust & vermin proof
Double door IP-43 surface mounting SPN MCB DB
incorporated with bas-bar, Neutral link, Earth bar and
din rail etc fitted on wall with grouting nuts & bolts as
reqd. complete with making necessary connection as
approved, specified and directed by the deptt. 8
way SPN double door
107 Supply, installation & testing of G.I. earth station with 4.000 Each
perforated 40 mm dia and 4.50 Metre long heady
duty G.I. pipe with necessary 40 mm dia. G.I.
Fittings such as Socket, Tee, elbow, nipple and 50
mmx40 mm G.I. reducing socket for funnel including
locking arrangement 300 mmx300 mmx6 mm hinged
cover C.I. earth plate complete with digging of earth
pit, construction of brick chamber and plastering of
both inner & outer surface of wall as specified and
directed by the deptt .
108 Extra for using salt (5 K and Charcoal (64 K in pipe 4.000 EACH
Earth Station pit to provide low impedance ground in
location of high soil resistivity as and when required
and specified by the Deptt.
109 Supplying & laying of 6 SWG G.I. earth from Earth 4.000 MTR
Electrode (below G.L.) to electrical switch gears or
electrical machineries including making necessary
connection as approved, specified and directed by
the deptt.
112 Supplying and fixing of Call bell ( Buzzer ) including 4.000 EACH
6 amp capacity flush type bell push switch including
connection as approved by the Deptt.)as required.
114 Supplying and fixing of Plain Pendent holder (Anchor 8.000 EACH
Penta PC CHERRY /Gold medal /Kolor
kany.kom/Havells or equivalent make as approved by
the Deptt.) with twin twisted flexible cord including
connection as approved by the Deptt.)complete
Without Lamp
115 Supplying and fitting of 11/15 Watt CFL lamp in the 16.000 EACH
existing batten holder/angle holder/decorative
bracket/bulk head fitting/ pendent holder etc. as
specified and directed by the deptt.
116 Supplying with fitting & fixing the 'S' hook for fiting the 16.000 NOS
ceiling fan
117 Additional Payment to be made to A.S.E.B for load & 8.000 L/S
meter security ( if the total load is 5 KW or more
118 Wiring for light/ fan/ call bell point with 2x1.5 sq mm 4.000 EACH
P.V.C. insulated single core unsheathed industrial
(Multistrand) cable FR conforming to IS-694: 1990
with flexible bright annealed electrolytic copper
conductor for voltage grade up to 1100 volts
(Finolex /RR Kabel /Nicco / Anchor or Equivalent
Make as approved by the Deptt.) with flat 19 mm ISI
marked casing 'n' capping (AKG / Precision/ Presto
Plast/Polycab/ MW or equivalent make as approved
by the Deptt.) in surface system, including 6 Amp
flush type switch/ bell push (Anchor Penta/Gold
medal /Kolor kany.Kom/ Havells or equivalent make
as approved by the Deptt.) GI/ MS switch board (ISI
marked) half conceal on wall with phenolic laminated
sheet cover ,ceiling rose (Anchor/Gold medal /Kolor
kany.Kom / Havells or equivalent make as approved
by the Deptt.) etc. complete as directed and specified
by the Deptt. Short point up to 3.00 metre. length.
119 Wiring for light/ fan/ call bell point with 2x1.5 sq mm 24.000 EACH
P.V.C. insulated single core unsheathed industrial
(Multistrand) cable FR conforming to IS-694: 1990
with flexible bright annealed electrolytic copper
conductor for voltage grade up to 1100 volts
(Finolex /RR Kabel /Nicco / Anchor or Equivalent
Make as approved by the Deptt.) with flat 19 mm ISI
marked casing 'n' capping (AKG / Precision/ Presto
Plast/Polycab/ MW or equivalent make as approved
by the Deptt.) in surface system, including 6 Amp
flush type switch/ bell push (Anchor Penta/Gold
medal /Kolor kany.Kom/ Havells or equivalent make
as approved by the Deptt.) GI/ MS switch board (ISI
marked) half conceal on wall with phenolic laminated
sheet cover ,ceiling rose (Anchor/Gold medal /Kolor
kany.Kom / Havells or equivalent make as approved
by the Deptt.) etc. complete as directed and specified
by the Deptt. Medium point up to 6.00 metre. Length.
120 Wiring for light/ fan/ call bell point with 2x1.5 sq mm 20.000 Sq.m
P.V.C. insulated single core unsheathed industrial
(Multistrand) cable FR conforming to IS-694: 1990
with flexible bright annealed electrolytic copper
conductor for voltage grade up to 1100 volts
(Finolex /RR Kabel /Nicco / Anchor or Equivalent
Make as approved by the Deptt.) with flat 19 mm ISI
marked casing 'n' capping (AKG / Precision/ Presto
Plast/Polycab/ MW or equivalent make as approved
by the Deptt.) in surface system, including 6 Amp
flush type switch/ bell push (Anchor Penta/Gold
medal /Kolor kany.Kom/ Havells or equivalent make
as approved by the Deptt.) GI/ MS switch board (ISI
marked) half conceal on wall with phenolic laminated
sheet cover ,ceiling rose (Anchor/Gold medal /Kolor
kany.Kom / Havells or equivalent make as approved
by the Deptt.) etc. complete as directed and specified
by the Deptt. Long point up to 10.00 metre. Length.
121 Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm 16.000 EACH
P.V.C. insulated single core unsheathed industrial
(Multistrand) cable FR conforming to IS-694: 1990
with flexible bright annealed electrolytic copper
conductor for voltage grade up to 1100 volts
(Finolex /RR Kabel /Nicco / Anchor or Equivalent
Make as approved by the Deptt.) with flat 19 mm ISI
marked casing 'n' capping (AKG / Precision/ Presto
Plast/Polycab/ MW or equivalent make as approved
by the Deptt.) in surface system, including 5 pin 6
Amps flush type plug socket and 6 Amps F/T switch
(Anchor penta /Gold medal /Kolor kany.Kom/Havells
or equivalent make as approved by the Deptt.), GI/
MS switch board (I.S.I. marked) with phenolic
laminated sheet cover including earth continuity with
1.5 sq. mm. cable to third pin of the plug socket etc.
as required complete, when placed elsewhere.
Medium point up to 6.00 meter length
122 Wiring for 5/6 pin 16 Amps power plug point with 4 8.000 EACH
sq. mm. P.V.C. insulated single core unsheathed
industrial (Multistrand) cable FR conforming to IS-
694: 1990 with flexible bright annealed electrolytic
copper conductor for voltage grade up to 1100 volts
(Finolex /RR Kabel /Nicco / Anchor or Equivalent
Make as approved by the Deptt.) with flat 19 mm ISI
marked casing 'n' capping (AKG / Precision/ Presto
Plast/Polycab/ MW or equivalent make as approved
by the Deptt.) in surface system, including providing
and fixing 5/6 pin 16 Amps flush type socket outlets
and 16 Amps flush type switch ( Anchor penta /Gold
medal /Kolor kany.Kom/Havells or equivalent make
as approved by the Deptt.),GI/ MS switch board
(I.S.I. marked) with phenolic laminated sheet cover
earth continuity with 2.5 sq. mm cable to the 3rd pin
of the socket as required completeWiring as in item
no (1) above to a call bell point in surface
PVCconduit wiring system in 19 mm dia, 1.2 mm
thick rigid PVC conduit Medium point up to 6.00
meter length
123 Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. 8.000 Per Point
insulated single core unsheathed industrial
(Multistrand) cable FR conforming to IS-694: 1990
with flexible bright annealed electrolytic copper
conductor for voltage grade up to 1100 volts
(Finolex /RR Kabel /Nicco / Anchor or Equivalent
Make as approved by the Deptt.) including providing
& fixing 5 pin 6 amp socket outlet (Anchor penta
/Gold medal /Kolor kany.Kom/Havells or equivalent
make as approved by the Deptt.) and 6 amp flush
type switch (Anchor penta /Gold medal /Kolor
kany.Kom/Havells or equivalent make as approved by
the Deptt.) earthing the 3rd pin of the socket as
required on the switch board in flat ISI marked
casing 'n' capping system, when fitted on same board
of light and fan.
124 Wiring for drawing sub-main line with P.V.C. insulated 20.000 R.M
single core unsheathed industrial (Multistrand) cable
FR conforming to IS-694: 1990 with flexible bright
annealed electrolytic copper conductor for voltage
grade up to 1100 volts (Finolex /RR Kabel /Nicco /
Anchor or Equivalent Make as approved by the
Deptt.) in surface flat ISI marked casing 'n' capping
(AKG / Precision/ Presto Plast/Polycab/ MW or
equivalent make as approved by the Deptt.) system
including earth continuity.With 2 x 2.5 sq. mm. + earth
continuity with 1x1.5 sq. With 2 x 2.5 sq. mm. + earth
continuity with 1x1.5 sq.
125 Wiring for drawing sub-main line with P.V.C. insulated 160.000 R.M
single core unsheathed industrial (Multistrand) cable
FR conforming to IS-694: 1990 with flexible bright
annealed electrolytic copper conductor for voltage
grade up to 1100 volts (Finolex /RR Kabel /Nicco /
Anchor or Equivalent Make as approved by the
Deptt.) in surface flat ISI marked casing 'n' capping
(AKG / Precision/ Presto Plast/Polycab/ MW or
equivalent make as approved by the Deptt.) system
including earth continuity.With 2 x 4.0 sq. mm. + earth
continuity with 1x2.5 sq. mm. in flat 19 mm ISI
marked casing 'n' capping system.
127 Supplying with fitting and fixing sheet steel, 8.000 EACH
phosphatised, powder painted dust & vermin proof
Double door IP-43 surface mounting SPN MCB DB
incorporated with bas-bar, Neutral link, Earth bar and
din rail etc fitted on wall with grouting nuts & bolts as
reqd. complete with making necessary connection as
approved, specified and directed by the deptt. 8
way SPN double door
128 Supply, installation & testing of G.I. earth station with 4.000 EACH
perforated 40 mm dia and 4.50 Metre long heady
duty G.I. pipe with necessary 40 mm dia. G.I.
Fittings such as Socket, Tee, elbow, nipple and 50
mmx40 mm G.I. reducing socket for funnel including
locking arrangement 300 mmx300 mmx6 mm hinged
cover C.I. earth plate complete with digging of earth
pit, construction of brick chamber and plastering of
both inner & outer surface of wall as specified and
directed by the deptt .
129 Extra for using salt (5 K and Charcoal (64 K in pipe 4.000 Sq.m
Earth Station pit to provide low impedance ground in
location of high soil resistivity as and when required
and specified by the Deptt.
130 Supplying & laying of 6 SWG G.I. earth from Earth 4.000 MTR
Electrode (below G.L.) to electrical switch gears or
electrical machineries including making necessary
connection as approved, specified and directed by
the deptt.
133 Supplying and fixing of Call bell ( Buzzer ) including 4.000 EACH
6 amp capacity flush type bell push switch including
connection as approved by the Deptt.)as required.
135 Supplying and fixing of Plain Pendent holder (Anchor 16.000 EACH
Penta PC CHERRY /Gold medal /Kolor
kany.kom/Havells or equivalent make as approved by
the Deptt.) with twin twisted flexible cord including
connection as approved by the Deptt.)complete
Without Lamp
136 Supplying and fitting of 11/15 Watt CFL lamp in the 32.000 EACH
existing batten holder/angle holder/decorative
bracket/bulk head fitting/ pendent holder etc. as
specified and directed by the deptt.
137 Supplying with fitting & fixing the 'S' hook for fiting the 40.000 NOS
ceiling fan
Total in Figures
NUMBER # TEXT #
TOTAL AMOUNT WithTaxes in TOTAL AMOUNT
Rs. P In Words
53 55
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE!
Please Enable Macros to View BoQ information
Q information