Академический Документы
Профессиональный Документы
Культура Документы
Create and modify 3D models part and assembly & installation drawings and validate
manufacturing drawings in PROE,CREO.
• 3D surface modeling of casting components considering HPDC, GDC and Sand
castings.
Key Responsibilities • 2D drawing of Casting, forging and assembly installation drawing.
• Assembly and integration of axle and transfer case as to suit vehicle requirement..
• Designed shift system for Hi-Neutral-Low shift system, differential lock and axle
disconnects arrangement.
• Designed Cooling and lubrication arrangement.
• Tolerance stack up for different assemblies.
• Shaft torsion and bending analysis by manual calculation and kiss-soft.
• Bearing load calculation for housing strengthing using kiss-soft.
• Bearing life calculation.
• Product data management in PLM.
• Preparing reports and presentation of proposals for various schemes for VRDE.
• Experience in ASME drafting standards and GD&T symbols.
1. casting modeling
Areas of Expertise 2. Lubrication system design
3. Expert in tolerance stak up
4. PLM knowledge
1. Responsible for Pattern design, core box design and fixture design.
Key Responsibilities 2.Responsible for designing of casting model based on customer finished Product.
3. Creating method drawing and method model for casting trial of component.
4.Responsible for modeling, assembling of method cards for simulation purpose in
software’s like MAGMA, ProCAST.
5. Responsible for making cutting plan for plate material.
6. Analyzing and evaluating technical requirements & recommending design
modifications based on client requirement.
7. Providing technical inputs & engineering support to the team from conception to
completion stage of the product.
1. casting modeling
Areas of Expertise 3. Expert in tolerance stak up
4. expert on thin structure and rotor design
1.Body and tailpiece used in Ball valve of size from 2” to 6” by Sand casting
Sample Projects 2.. Rotors and vanes of size 0.75” to 8” used in the flow measurements by
investment casting process.
3.Gate Valves & Butterfly valves.
Name Solidwork engg 1
Designation Design Engineer
Academic Qualifiactions BE Mechanical
1.3D modeling with efficient drafting, detailing, section with B.O.M, GD&T and
Areas of Expertise machining symbols.
2.Good Knowledge about Sheet metal designing and manufacturing process.
3. Surface Design
4. Sketch tracer and GSD
1.Development of Cable Tray and cable ladder system of variable sizes and shapes.
Sample Projects 2. Development of Pan feeder of feeding system
3. Design of inspection carts
4. portable lighting tower design
5.Controlling of over load on Heavy Vehicle
Name Solidwork engg 2
Designation Design Engineer
Academic Qualifiactions BE Mechanical
Key Responsibilities 1.Experience of Design of Tunnel core dies and hydraulic core dies.
2.All kinds of Ejection Systems like Sleeve ejector , Stripper Ejector &Ejector pins
3. Design of trimming dies which will suit to the mass production.
4. Manufacturing drawing & GD&T
1. Design of various types high pressure casting dies such as hot chamber dies , cold
Areas of Expertise chamber dies .
2.Knowledge of all conventional machines, EDM, wire cut, laser engraving
3.Design for BIW Welding Fixtures as per guidelines by using Contextual Method
4. POKA_YOKE and Human Ergonomics Study.