Академический Документы
Профессиональный Документы
Культура Документы
Madali
1. A 200 N force has to be exerted at a velocity of 20 m/s. What is the power required?
2. The bore is 20 cm and the stroke is 18 cm. What is the piston displacement?
4. A water stream has the following data: head-10 meters; width-10 ft; average depth-30
inches; velocity-500 cm/s. The theoretical power available from the stream is:
6. A multi-sail type of windmill has a diameter of 2 m. and the wind velocity is 12 mph.
What is the theoretical power?
7. In a spark ignition system, it protects the breaker point by preventing arcing. It also
helps intensify the spark in the spark plug gap.
8. If a carabao pulls an implement with a draft of 200 lb at a speed of 2.5 mph, what is the
approximate power generated?
9. The ideal air-fuel ratio in terms of weight for cetane (C16H34) is:
10. Fresh supply of fuel mixture enters the cylinder as the piston moves downward and
the intake valve opens. This engine is a:
1. An engine rotates at 2000 rpm and the tractor travels at 15 mph. What is the speed of
rotation of the rear axle if the rear wheels are 46 in. in diameter?
Velocity = N ×π × Diameter
SpeedX=109.6 rpm
ihp = imep × L × A × N × n × ½ × C
Mahirap
1. A gasoline engine has a thermal efficiency of 25%. Tests show it uses 1 liter of
premium gasoline fuel per hour. What is the approximate power it generates?
2. The crankshaft speed of an engine is 1000 rpm. If the bore is 10 cm and the stroke is
10 cm, what is the average piston speed?
3. The crankshaft speed of an engine is 1000 rpm. If the bore is 10 cm and the stroke is
10 cm, what is the maximum piston speed?
Power = 1,500 (9.8) (0.3) × 10 km/hr (1000 m/km)(1 hr/3600s) (1 kw/1000 watt)
= 11.25 kw = 15 hp
5. Determine the average output at the crankshaft of an engine at 3600 rpm if the torque
exerted is 200 ft-lb.
a. 68.54 kW b. 51.10 kW c. 63.76 kW d. 76.54 hp e. none of the above
6. A 4-stroke cycle engine is running at 3,000 rpm. If the camshaft actuates the
intake valve to open during 1/3 of the total camshaft rotation, for how long is the
intake valve open?
= 0.02 sec/rev
Since the camshaft rotates half the speed of the crankshaft, the total range of operation in
terms of one total crankshaft rotation is (360/3)(2) = 240°.
= 0.0133 s