Академический Документы
Профессиональный Документы
Культура Документы
FlexiROC T35
Hole diameter: 64 –115 mm (2 1/2”– 4 1/2”)
FlexiROC T40
Hole diameter: 64–127 mm (2 ½”– 5”)
Flexible rigs for
all occasions
For efficient and flexible production; Our FlexiROC T35 and
FlexiROC T40 are hard to beat in the quarry or on the construction
site.
FlexiROC T35 and FlexiROC T40 are Even in tough terrain conditions,
flexible and versatile tophammer drill utilization of the rigs is high, thanks to
rigs, developed and designed for high the long reach of the boom and the low
performance in demanding construction center of gravity. They are equipped with
applications. They are also a very efficient a high-efficiency Atlas Copco rock drill
alternative for small and medium size with high output and productivity.
quarrying.
Main benefits
Optimal use of rock drill and increased tool
life thanks to a cylinder-operated feed system
2 3
Technical specifications
• Track frames with single grouser pads and cleaning holes • Hydraulic rock drill
• Hydraulic track oscillation and two speed traction • Dust collection system
These rigs are built Atlas Copco solid. Thanks to a high degree of commonality with • Atlas Copco screw type compressor • Dust pre separator
• Operator’s cabin, ROPS and FOPS approved • Double hydraulic drill steel support with movable down support
other Atlas Copco surface drill rigs and a world-wide service network, spare parts and • LED work lights • Service lamp inside canopy
consumables are there when you need them to insure continuous uptime and great • Folding boom system • Rock drill oil collecting system
performance. • Aluminum profile feed beam • Rubber skirt for DCT
• Hydraulic cylinder feed system • COP Logic
• Carousel type rod handling system, 1 + 7 rods
Feed
FlexiROC T35 FlexiROC T40 FlexiROC T35-LF
+ Safety Metric Imperial Metric Imperial Metric Imperial
The ROPS and FOPS approved cabins provide both comfort and safety. Feed extension 1 400 mm 4’7’’ 1 400 mm 4’7’ 1 400 mm 4’7’
Reliable and fast rod handling makes work go fast and smooth and a Feed rate, max 0.92 m/s 184 ft/min 0.92 m/s 184 ft/min 0.92 m/s 184 ft/min
rigid drill steel support decreases hole deviation for more accurate and Feed force, max 20 kN 4 400 lbf 20 kN 4 400 lbf 20 kN 4 400 lbf
higher quality holes. Maintenance is convenient as well, thanks to an Tractive pull, max 20 kN 4 400 lbf 20 kN 4 400 lbf 20 kN 4 400 lbf
Total length 7 140 mm 23’5’’ 7 140 mm 23’5’’ 8 240 mm8 27’7”
efficient design. When there’s work to be done, your FlexiROC T35 and
Travel length 4 240 mm 14’ 4 240 mm 14’ 8 670 mm 18’7”7”
FlexiROC T40 will deliver.
Compressor
FlexiROC T35 FlexiROC T40 FlexiROC T35-LF
Atlas Copco OIS K-27-C106 GD, screw compressor Metric Imperial Metric Imperial Metric Imperial
Working pressure, max 10.5 bar 152 psi 10.5 bar 152 psi 10.5 bar 152 psi
FAD, at normal working pressure 127 l/s 270 cfm 149 l/s 316 cfm 127 l/s 270 cfm
4 5
Technical specifications Technical specifications
FlexiROC T35 and T40 The use of the rock drill with
its unique double dampening 32°
45° 0°
system improves productivity 20°
Feed without toe-hole kit Feed without toe-hole kit but after reconnection for horizontal
feed.
30° 0°
45° 45°
95°
8 7
6 5
H1 H1
4 3
2 1
9
8
7
L1 L1
5
5
4
4
Feed dumped 1 Feed dumped 2
3
3
2
2
1
1
0
0
1
1
2
2
Safety cabin
3
3
4
4
5
5
• ROPS and FOPS approved with rubber vibration dampers • Rear view mirror 3D coverage area
• 2 x wipers with washer • Fire extinguisher, 6 kg (13 lbs) dry chemical type ABE class III type
• Clear laminated glass (10 mm front and roof windows) • Outlet socket, 24 V
Selection of options
• Clear laminated glass (8 mm side window) • Prepared with speakers for CD-radio or DVD radio
• Clear toughened glass (8mm rear window) • Combined front mounted platform/tool box Cabin • PAR Oil M & S Water system
• Window panes: Laminated 24 mm clear • Central lubrication system • Complete water mist system 120 l tank
• Fully adjustable operator’s seat • Electrical heated chair front, 10 mm roof and 8 mm tinted side – • Tool box left rear side
• Cabin light • Cab heating toughend 8 mm rear • Extra air outlet on front of the carrier Hole and inclination systems
• Rig inclination indicator • Tinted 10 mm roof window • Xenon work lights • Hole inclination/depth instrument HQS11
• Window wiper, right hand window • Air flow switch • Laser plane receiver for hole depth HQS12
• Sun shade kit (rear side, rear windows and • GPS compass aiming unit
roof) Feed • Mechanical hole inclination instrument ROC
• Electric heated operator’s seat • Protective guard, according to EN16228 angle
• Reverse camera with cab mounted display • Bigger Dowel with big plate to avoid sinking
• Radio with CD player in soft ground Parts and Services
25° • Camera for support leg • TAC guide tube guides for drill steel support • COP Care
3100 - TAC 56 mm for 56 mm guide tube • ROC Care
2 490
Carrier - TAC 64 mm for 64 mm guide tube
• Hydraulic support leg - TAC 76 mm for 76 mm guide tube Optional equipment not mounted
• Hydraulic winch including wire with towing - TAC 87 mm for 87 mm guide tube • Gas charging equipment for rock drill
eye and wire guides • Support bracket RHS carousel • First 50 hours service kit for compressor
25°
4780 • Diesel-driven engine heater • Thread greasing device ECG (with oil) • Lubrication system
2755 • Electric fuel filling system • Thread greasing device, brush type (with • Conversion kit T45
5500
• Tow hook grease) • Conversion kit T51
• Track chains with triple grouser pads • Sleeve retainer
6 • Rubber disc for DCT 7
Vertical reach (mm)
9851 3412 01c 2017-06 Örebro, Sweden. Legal Notice © Copyright 2017, Atlas Copco Rock Drills AB, Örebro, Sweden. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos may show
equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information.
www.atlascopco.com