Академический Документы
Профессиональный Документы
Культура Документы
CHAPTER 7
COST ANALYSIS
7.1 GENERAL
The cost of all materials obtained from local suppliers and used in
this research is shown in Table 7.1. Sodium silicate and sodium hydroxide
were obtained from M/S Thirumalai Traders, Venkalakadai Street, Madurai –
625 001. Hyperplasticiser under trade name GLENIUM B233 was purchased
directly from BASF India, Chennai while superplasticiser under trade name
Conplast 320 was purchased directly from ROFF chemicals private limited,
Chennai.
149
Sl. Rate
Material Unit
No in Rs.
1. Fly ash 300 MT
2. Fine aggregate 800 MT
3. Coarse aggregate 650 MT
4. Cement 300 50 kg
5. Sodium silicate in liquid form 8 kg
6. Sodium hydroxide in flake form 25 kg
7. Lignosulphonated
100 kg
Superplasticiser based
Carboxylic based 200 kg
The cost of OPC concrete for one cubic metre is analysed based on the
quantity of materials required and is tabulated in Table 7.2.
M 30 Grade M 50 Grade
Sl. Rate
Material Unit Quantity Amount Quantity Amount
No in Rs.
in kg in Rs. in kg in Rs.
1. Cement 300 50 kg 350 2100 450 2700
2. Fine aggregate 800 MT 642 514 425 340
3. Coarse aggregate 650 MT 1270 826 1381 898
4. Super Lignosulphonated
100 kg 7.5 750 - -
plasticiser based
Polycarboxylic
200 kg - - 8 1600
based
TOTAL 4190 5538
150
M 30 Grade M 50 Grade
Sl.
Material Rate Unit Quantity Amount Quantity Amount
No
in kg in Rs. in kg in Rs.
1. Fly ash 300 MT 378 189 408 204
2. Fine aggregate 800 MT 554 443 647 518
3. Coarse aggregate 650 MT 1294 841 1201 781
4. Sodium silicate 8 kg 124 992 138 1104
7.4 CONCLUSION