0 оценок0% нашли этот документ полезным (0 голосов)
64 просмотров4 страницы
This document summarizes the calculation of the collapse pressure for an interstiffened conical shell. It provides the material properties, dimensions of the shell, and calculation steps to determine the theoretical elastic instability pressure and lower bound collapse pressure. The calculated lower bound collapse pressure is 7.2 MPa, which exceeds the specified calculation and test pressures of 2.5 MPa and 4 MPa, respectively.
This document summarizes the calculation of the collapse pressure for an interstiffened conical shell. It provides the material properties, dimensions of the shell, and calculation steps to determine the theoretical elastic instability pressure and lower bound collapse pressure. The calculated lower bound collapse pressure is 7.2 MPa, which exceeds the specified calculation and test pressures of 2.5 MPa and 4 MPa, respectively.
This document summarizes the calculation of the collapse pressure for an interstiffened conical shell. It provides the material properties, dimensions of the shell, and calculation steps to determine the theoretical elastic instability pressure and lower bound collapse pressure. The calculated lower bound collapse pressure is 7.2 MPa, which exceeds the specified calculation and test pressures of 2.5 MPa and 4 MPa, respectively.
3 Interstiffener collapse The minimum yield strength or 0,2% proof strength at calculation temperature: Rp0,2T 345 [Mpa]
The nominal elastic limits for shell:
Ferritic material 𝜎 =𝑅 , / Austenitic material 𝑅 , / 𝜎 = 1,25 Fer σe 345 [Mpa] The nominal thickness: en 35 [mm] The corrosion allowance: c 2 [mm] The absolute value of the possible negative tolerance on the nominal thickness (EN 10029): quality C de1 0 [mm]
Limit values of weld joint defects (EN ISO 5817): quality D
Linear offset between plates (EN 5817): 𝐵 → 𝛿 = 𝑚𝑖𝑛 0,2 + 0,1𝑒 ; 3 𝐶 → 𝛿 = 𝑚𝑖𝑛 0,2 + 0,15𝑒 ; 4 𝐷 → 𝛿 = 𝑚𝑖𝑛 0,2 + 0,25𝑒 ; 5 de2 5 [mm] Defects of welds: 𝐵 → 𝛿 = 0,2𝑒 ∗ 0,04 𝐶 → 𝛿 = 0,3𝑒 ∗ 0,08 𝐷 → 𝛿 = 0,4𝑒 ∗ 0,16 de3 2,2 [mm] The analysis thickness: 𝑒 =𝑒 −𝛿 −𝛿 −𝛿 −𝑐 ea 25,8 [mm] The maximum radius of conical shell: Rmax 1000 [mm] The mean radius of conical shell: Rn 567 [mm] The semi angle of come at apex: α 30 [°] The elastic modulus: E 210000 [MPa] The unsupported length of the shell: L 1000 [mm]
The pressure at which mean circumferential stress in a
conical shell, reaches yield point: 𝑒 ∗ 𝜎 ∗ cos 𝛼 𝑃 = 𝑅 Py 7,7 [MPa] L/2R=L/2Rncosα 1,0 ea/2R=ea/2Rncosα 0,026 The number of circumferential waves for an unstiffened part of a conical shell: ncyl 3 [] Parameter: 𝜋 ∗ 𝑅 ∗ cos ∝ 𝑍= 𝐿 Z 1,5 [] Poisson's ratio: ν 0,3 []
The mean elastic circumferential strain at collapse: