Академический Документы
Профессиональный Документы
Культура Документы
INCLUDES
C
L
starts.
Pulsed MIG – Varies weld current to
Low power consumption for energy reduce warping and burnthrough on thin
savings - 88% efficiency. materials.
Parallel two units - For 700A carbon arc Pulse-On-Pulse® – Controls arc length
Two Year Extended
gouging. Warranty Available in
and heat input to achieve excellent the U.S.A. and Canada.
Bright, large digital amp and volt meters appearance and penetration on
are easy to monitor - Even in sunlight – and aluminum.
presettable for precise procedure control. Power Mode® – Delivers a responsive
Rugged skid and tube handles - For arc when MIG welding to reduce www.lincolnelectric.com/green
Our lightest, most portable model at a value price 12 1) Large, bright, easy to read meters
for conventional MIG, cored, stick, arc gouging and 2) Local/remote output control
non-remote output control DC TIG applications. 3) Mode selection switch
Great For: 1 4) Negative and Positive Twist Mate™
Output Terminals
• Construction, maintenance or shop welding. 11 5) Wire Feeder Voltmeter Polarity Switch
Compatible with: 2 10 6) Circuit Breaker Reset Buttons
• LN-25 PRO model wire feeders. 7) On/Off Switch
9 8) Hot Start Control
• 6-pin and 14-pin MS connector not included. 3 9) Arc Control Knob
8
10) Weld Terminals on or remotely
7 controlled
11) Preset Output Amps and
4 Voltage Control
12) Thermal Overload Indicator Light
5 6
Factory Model (K1728-6 with Twist Mate™ Cable Receptacles) (K1728-13 with Tweco® Cable Receptacles)
• Adds full remote capabilities and auto-detect local/ 13 1) Large, bright, easy to read meters
remote override control. 2) Local/remote output control
• Versatile multi-process machine for MIG, cored, 3) Mode selection switch
stick, TIG and arc gouging applications. 1 4) Remote Output Control Receptacles –
6- & 14-pin
• Optional Advanced Process Panel adds: 12 5) Negative and Positive Twist Mate™
– Pulsed MIG 2 or Tweco® Output Terminals
– Lincoln Electric Power Mode® 11
6) Wire Feeder Voltmeter Polarity Switch
– Lincoln Electric Pulse-on-Pulse® 7) Circuit Breaker Reset Buttons
3 10
Great For: 8) On/Off Switch
9
• Construction or large-scale production factory 9) Hot Start Control
applications. 4 10) Arc Control Knob
8
Compatible with: 11) Weld Terminals on or remotely
5 controlled
• LF-72, LF-74, LN-10, DH-10, and LN-25 PRO 12) Preset Output Amps and
wire feeders. Voltage Control
• 6-pin and 14-pin MS-type connectors. 13) Thermal Overload Indicator Light
6 7
• Standard Advanced Process Panel adds: 1) Large, bright, easy to read meters
12
– Pulsed MIG 2) Local/remote output control
– Lincoln Electric Power Mode® 3) Mode selection switch
– Lincoln Electric Pulse-on-Pulse® 4) Remote Output Control Receptacles –
1 6- & 14-pin
• Standard full remote capabilities and
auto-detect local/remote override control. 11 5) Negative and Positive Twist Mate™
2 Output Terminals
• Advanced multi-process machine for pulsed MIG, 10 6) Wire Feeder Voltmeter Polarity Switch
cored, stick, TIG and arc gouging applications. 7) Circuit Breaker Reset Buttons
Great For: 3 9 8) On/Off Switch
• High-end pulsed MIG applications. 9) Arc Control Knob
4 10) Weld Terminals on or remotely
Compatible with: 8 controlled
• LF-72, LF-74, LN-10, DH-10, 5 11) Preset Output Amps and
and LN-25 PRO wire feeders. Voltage Control
12) Thermal Overload Indicator Light
• 6-pin and 14-pin MS-type connectors.
6 7
Tweco® is a registered trademark of Thermadyne corporation.
Ready-Pak® Packages
Fully assembled and ready to weld—just add
wire and gas.
V350 PRO Factory Model / LF-72 Heavy Duty
Wire Feeder
(for non-pulsed MIG Welding)
Order K2437-2
• V350 PRO Factory Model
• LF-72 Heavy Duty Wire Feeder
• 15 ft. (4.5 m) Magnum® PRO 350 gun
and cable assembly w/ .035-.045 in.
(0.9-1.2 mm) liner.
• Work and Wire Feeder 2/0 Welding Cable
Package
• Harris® Flowmeter Regulator and Hose
Shown:
• Heavy Duty Inverter and Wire Feeder Cart Invertec® V350 PRO Factory Model/
LF-72 Heavy Duty Wire Feeder Ready-Pak ®
RECOMMENDED ACCESSORIES
Foot Amptrol™
TIG OPTIONS TIG-Mate™ 17V Air-Cooled
Provides 25 ft. (7.6 m) of remote
TIG Torch Starter Kit
Pro-Torch™ TIG Torches current control for TIG welding.
Get everything you need for TIG
A full line of air-cooled and water- (6-pin plug connection).
welding in one complete easy-
cooled torches available. Order K870
to-order kit packaged in its own
Request Lincoln publication E12.150
portable carrying case. Includes:
Arc Start Switch PTA-17V torch, parts kit, Harris®
TIG Module May be used in place of the Foot or flowmeter/regulator, 10 ft. (3.0 m)
Portable, high frequency unit with Hand Amptrol™. Comes with a 25 gas hose, and work clamp and
gas valve for TIG welding. Rated at ft. (7.6 m) cable. Attaches to the TIG cable.
300 amps/60% duty cycle. Requires torch for convenient finger control to Order K2265-1
TIG Module Control Cable. start and stop the weld cycle at the
Order K930-2 current set on the machine.
TIG-Mate™ 17 Air-Cooled
Order K814
TIG Torch Starter Kit
TIG Module Control Cable Get everything you need for TIG
(For Factory and Advanced Process Invertec® TIG Solenoid Kit welding in one complete easy-
Models only) 9-pin connector at Mounts inside the back of the to-order kit packaged in its own
the TIG Module to 14-pin MS type V350 PRO. Switches gas flow in the portable carrying case. Includes:
connector at the power source. V350 PRO through the PTA-17 torch, parts kit, Harris®
(Contains input power, remote Twist Mate™ connector. Includes flowmeter/regulator, 10 ft. (3.0 m)
control, contactor control, and gas hose and solenoid. [Not gas hose, Twist Mate™ adapter,
ground circuits). For machines compatible with construction and and work clamp and cable.
having a 14-pin remote control and factory (Tweco®) models)]. Order K2266-1
power receptacle. Order K1762-2
Order K936-1
TIG-Mate™ 20 Water-Cooled
Twist Mate Torch Adapter
™ TIG Torch Starter Kit
TIG Module Control Cable For connection of Pro-Torch™ TIG Get everything you need for TIG
(For Construction Model only) torches (1 piece cable) to power welding in one complete easy-
9-pin connector at the TIG Module sources with gas passing through to-order kit packaged in its own
to a grounded 115V plug. (Contains the Twist Mate™ connection. For use portable carrying case. Includes:
input power, and ground circuits). with K1762-2. PTW-20 torch, parts kit, Harris®
For machines having no remote Order K1622-1 For air-cooled PTA-9 flowmeter/regulator, 10 ft. (3.0 m)
control capability. or PTA-17 torches. gas hose, Twist Mate™ adapter,
Order K936-4 work clamp and cable and 10 ft.
Order K1622-3 For air-cooled (3.0 m) water hose.
PTA-26 torches. Order K2267-1
PRODUCT SPECIFICATIONS
Rated Output Net
Product Product Input Current/Voltage/ Input Current Output HxWxD Weight
Name Number Model Power Duty Cycle @ Rated Output Range inches (mm) lbs. (kg)
K1728-5 Construction 200-208/230/380-415/ 350A/34V/60% 3ph: 50/42/28-26/23/18 5-425A 14.8 x 13.3 x 27.8 81 (36.7)
K1728-6 Factory 460/575/1/3/50/60 300A/32V/100% 1ph: 94/85/54/42/37 Max OCV: (376 x 338 x 709)
Invertec ®
K1728-7 Advanced Process 208/230/415/ 3ph: 41-39/36/23-22/19/16 80V DC
V350 PRO K1728-13 Factory (Tweco®) 460/575/1/3/50/60 1ph: 76/69/41/36/31 81.5 (37)
K1728-12 CE 200-220/380-400/ 350A/34V/60% (3ph) 3ph: 48/28-27/26-24 –
415-440/1/3/50/60 320A/33V/60% (1ph) 1ph: - 82/55-50/48-45
300A/32V/100% (3ph) 3ph: 41-37/28-22/22-21
275A/31V/100% (1ph) 1ph: - 64/44-43/38-35
For best welding results with Lincoln Electric equipment, always use Lincoln Electric consumables. Visit www.lincolnelectric.com for more details.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many variables beyond the control of Lincoln
Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.