Академический Документы
Профессиональный Документы
Культура Документы
INSTRUCTIONS:
1. Initialing (BY/CHK’D/APP’D) required on cover sheet only. All other title block information
must be included on all pages.
2. Revisions are identified in the body of the Specification by a triangle with the revision
number, located in the right margin.
DESCRIPTION OF
REV. REVISION INCLUDING
NO. DATE PREP. CHK’D APP’D PAGE NUMBERS
Confidential Page 1 of 5
Document No. E-P1704-302-007-00 Page 2 of 5 Date 19th Jul 2017
Client Seya Industries Limited
Project 550 TPD Sulphuric Acid Plant
Document Specifications – Acid Circulation Pump
1. INTRODUCTION: Acid circulation pump is a vertical submerged pump located on the acid
pump tank.
2. FUNCTION: To pump the Sulfuric acid solution from Acid Pump Tank to the three towers
and product acid stream.
3. Operation:
4. Ambient Condition:
Scope of vendor will be mechanical design, fabrication and supply and documentation.
Vendor to provide detailed drawings with appropriate dimensions.
Type: Pump type shall be Vertical, Centrifugal Submerged type. It shall be complete with
motor coupling, coupling guard, base frame and foundation bolts.
Impeller: The impeller size shall be at least one size larger than the the minimum allowable
impeller size for the casing and at least one size smaller than the maximum impeller
size for the casing
Material of Construction: The vendor shall be responsible for selecting the proper materials
of constructions. The vendor shall give a detailed description of materials of
construction within the proposal.
Painting: Equipment shall be shop painted per manufacturer's standard epoxy prime and
finish system suitable for sulfuric acid plant service.
8 SHIPPING:
8.1 Adequate cribbing is the responsibility of Vendor, if found necessary.
8.2 Unit can be assembled in the shop/site.
8.3 Vendor will be responsible for transporting the equipment to the actual site
(Visakhapatnam).
Confidential Page 2 of 5
Document No. E-P1704-302-007-00 Page 3 of 5 Date 19th Jul 2017
Client Seya Industries Limited
Project 550 TPD Sulphuric Acid Plant
Document Specifications – Acid Circulation Pump
9 DOCUMENTS REQUIRED:
Confidential Page 3 of 5
Document No. E-P1704-302-007-00 Page 4 of 5 Date 19th Jul 2017
Client Seya Industries Limited
Project 550 TPD Sulphuric Acid Plant
Document Specifications – Acid Circulation Pump
MOTOR:
Type ................................................................
Manufacturer ............................................................
Frame size................................................................
Volts ................................................................ 415 10%
Phase ................................................................ 3
Cycles, Hz ................................................................ 50 5%
Horsepower Rating ................................
Service Factor .......................................................... 1.15
Speed, rpm ...............................................................
Discharge Connection Size, mm...............................
COUPLING:
Manufacturer ............................................................
Type ................................................................
Coupling Guard ........................................................
Confidential Page 4 of 5
Document No. E-P1704-302-007-00 Page 5 of 5 Date 19th Jul 2017
Client Seya Industries Limited
Project 550 TPD Sulphuric Acid Plant
Document Specifications – Acid Circulation Pump
MATERIALS OF CONSTRUCTION:
Casing ................................................................ 28/2 Cr. MoSt
Impeller ................................................................ 38 Ni + 33 CrSt
Shaft sleeve..............................................................
WEIGHT:
Pump only ................................................................
Pump with motor, coupling ................................
Confidential Page 5 of 5