Академический Документы
Профессиональный Документы
Культура Документы
FOX is an advanced premium threaded connection which has been jointly developed by JFE
TM
STEEL CORPORATION and HUNTING OILFIELD SERVICES. JFE STEEL CORPORATION has
over seventy years experience in steel production, and provides proprietary JFE-series OCTG
for sour service, low temperature service and hi-collapse service, in addition to API grades.
HUNTING OILFIELD SERVICES has over twenty-five years experience in the design,
manufacture and technical field service of connections for OCTG. Together, we have designed
a connection which uses innovative design concepts to overcome problems found in
conventional premium connections. Advanced
thread geometry, a unique seal design and
innovative gauging tech-niques combine to reduce
thread galling and enhance sealing performance.
FOX has been field-proven around the world.
TM
CONTENTS
INTRODUCTION
TM
1 FOX CONNECTION DESIGN FEATURES . . . . . . . . . . . . . . . 1 Legal Notice
TM This catalog is edited for general information only. Although every
2 THE FOX PITCH CHANGE CONCEPT . . . . . . . . . . . . . . . . . . 2 possible effort is made to maintain the accuracy and reliability of
the contents of this publication, JFE Steel Corporation in no way
assumes liability or responsibility for any loss, damage or injury
3 SUPERIOR LOAD DISTRIBUTION . . . . . . . . . . . . . . . . . . . . . 3 resulting from the use of the information and data contained herein.
It is requested that all applications for the material described are to
4 FEA MODELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 be undertaken solely at the customer's own risk and responsibility.
PIPE WALL
BUTTRESS TYPE THREAD WITH
PITCH CHANGE
reduces peak tooth load and improves
load distribution
COUPLING
CONTOURED METAL-TO-METAL
SEAL
reduces stress concentration and
ensures excellent sealability
PIPE WALL
THREAD PITCH CHANGE 1. Reduction of maximum tooth load a. High resistance to thread galling
2. More even tooth load distribution b. Good control of make-up
c. High resistance to back off
d. High resistance to coupling belling
and unzipping
e. increased fatigue life
1
TM
2. THE FOX PITCH CHANGE CONCEPT
A B C
A The gap between load flanks closes B The standard pitch area acts to C The gap between load flanks on
as the joint is made up to torque concentrate loads in the center section initial assembly closes as the joint is
condition. of the thread. axially loaded in tension.
Coupling
Pitch 1
Pipe
The gaps between the load-bearing flanks of the threads are closed by make-up torque and by the axial load imposed by
pipe weight. Threads are preferentially loaded in the center of the connection, with reduced loads in the inner and outer
TM
sections. The risk of thread galling is reduced by the lower level of radial thread interference in the FOX connection in
comparison to other designs.
2
3. SUPERIOR LOAD DISTRIBUTION
40,000 40,000
30,000 30,000
20,000 20,000
10,000 10,000
0 0
1 5 10 18 1 5 10 18
TM
FOX ●Make-up only ●
Make-up plus axial tension
PREMIUM
CONNECTION 1 5 10 18 1 5 10 18
40,000 40,000
30,000 30,000
20,000 20,000
10,000 10,000
0 0
1 5 10 18 1 5 10 18
4. F.E.A. MODELS
3
5. THE TRIPLE RADIUS SEAL CONCEPT
The triple radius seal used in the 'FOX ' connection comprises a pin seal feature having a profile of three interacting radii
TM
engaging with a corresponding sealing surface profile in the coupling. Because of the generous blending radius which
this design allows, there is a reduced local stress concentration giving better resistance to over torquing and fatigue.
Coupling
Pipe
Torque shoulder
Internally flush to eliminate turbulence (tubing only)
TM
The smooth, continuous profile of the FOX triple-radius seal improves sealing performance, reduces stress concentrations
and provides for increased overtorque resistance.
A more gradual lead-in during make-up is achieved compared with the conventional double taper design, and the principle
of tri-axial compression is included. Sealing is achieved as a result of combined radial and axial compression of the pin end.
The smooth interior pin to coupling profile produces internally flush bores for tubing applications, maximizing bore diameter
and reducing turbulence.
TM
FOX Connection Typical Premium Connection
160 160
Pipe
140 140
Cumulative strain energy (axial)
100 100
Pipe
80 80
Coupling
60 60
40 40
20 20
0 0
TM
Plots of strain energy induced in the pin and coupling for both a conventional and the FOX connections were obtained
from the finite element analysis. These confirm the prediction that the strain energy stored across the metal-to-metal seal
TM
for the FOX is significantly greater than for a conventional connection.
4
6. GAUGING TECHNIQUES
Electronic Gauging
TM TM
As part of the FOX development program, the FOX development team addressed problems of conventional thread
gauging, and devised a new electronic gauging technique. The gauge measures stand-off, taper, seal diameter and lead of
pin and box thread at a resolution of one micron. The measurements are analysed by a data processsing unit, which is able
to mathematically compensate for pipe ovality on the basis of measurement data. The electronic gauging process reduces
TM
the wear problem associated with hard gauging, and enables an individual data record to be retained for every FOX
connection.
Mechanical Gauging
TM
Conventional taper, lead and thread height gauges may also be used in gauging of FOX connections, in such forms as
go/no-go gauges.
5
7. AVAILABLE SIZES
Outside Nominal Wall Nominal Drift Coupling Outside Diameter Coupling Make up
Diameter Weight Thickness Inside TPI Diameter API Regular Coupling 100% Efficiency Special Clearance Coupling Length Loss
Diameter (API) Outside Tensile Outside Outside Tensile Length
D t d Diameter Efficiency Diameter Diameter Efficiency LL
in. mm lb/ft in. mm in. in. in. mm % in. mm in. mm % in. in.
2 3/8 60.32 4.60 0.190 4.83 1.995 8 1.901 2.723 69.16 5.125 2.313
5.80 0.254 6.45 1.867 8 1.773 2.782 70.66 5.125 2.313
2 7/8 73.02 6.40 0.217 5.51 2.441 8 2.347 3.297 83.74 5.875 2.688
7.80 0.276 7.01 2.323 8 2.229 3.297 83.74 5.875 2.688
8.60 0.308 7.82 2.259 8 2.165 3.412 86.66 5.875 2.688
3 1/2 88.90 7.70 0.216 5.49 3.068 6 2.943 3.878 98.50 6.790 3.145
9.20 0.254 6.45 2.992 6 2.867 3.878 98.50 6.790 3.145
10.20 0.289 7.34 2.922 6 2.797 4.053 102.95 6.790 3.145
12.70 0.375 9.52 2.750 6 2.625 4.053 102.95 6.790 3.145
15.50 0.476 12.09 2.548 6 2.423 4.150 105.41 6.790 3.145
4 101.60 9.50 0.226 5.74 3.548 6 3.423 4.378 111.20 7.456 3.478
10.70 0.262 6.65 3.476 6 3.351 4.378 111.20 7.456 3.478
13.20 0.330 8.38 3.340 6 3.215 4.556 115.72 7.456 3.478
4 1/2 114.30 10.50 0.224 5.69 4.052 5 3.927 5.000 127.00 145 4.824 122.53 4.882 124.00 114 9.469 4.440
11.60 0.250 6.35 4.000 5 3.875 5.000 127.00 131 4.867 123.62 4.882 124.00 103 9.469 4.440
12.60 0.271 6.88 3.958 5 3.833 5.000 127.00 121 4.901 124.49 4.882 124.00 96 9.469 4.440
13.50 0.290 7.37 3.920 5 3.795 5.000 127.00 114 4.932 125.27 4.882 124.00 90 9.469 4.440
15.10 5.000 127.00 99 5.005 127.13 4.882 124.00 78 9.469 4.440
15.20 0.337 8.56 3.826 5 3.701
18.90 0.430 10.92 3.640 5 3.515 5.000 127.00 79 5.142 130.61 4.882 124.00 62 9.469 4.440
21.50 0.500 12.70 3.500 5 3.375 5.000 127.00 69 5.238 133.05 4.882 124.00 55 9.469 4.440
23.70 0.560 14.22 3.380 5 3.255 5.000 127.00 63 5.316 135.03 4.882 124.00 49 9.469 4.440
5 127.00 13.00 0.253 6.43 4.494 5 4.369 5.563 141.30 145 5.364 136.25 5.391 136.93 106 9.869 4.640
15.00 0.296 7.52 4.408 5 4.283 5.563 141.30 125 5.435 138.05 5.391 136.93 91 9.869 4.640
18.00 0.362 9.19 4.276 5 4.151 5.563 141.30 104 5.540 140.72 5.391 136.93 75 9.869 4.640
21.40 0.437 11.10 4.126 5 4.001 5.563 141.30 87 5.652 143.56 5.391 136.93 63 9.869 4.640
23.20 0.478 12.14 4.044 5 3.919 5.563 141.30 80 5.711 145.06 5.391 136.93 59 9.869 4.640
24.10 0.500 12.70 4.000 5 3.875 5.563 141.30 77 5.742 145.85 5.391 136.93 56 9.869 4.640
5 1/2 139.70 15.50 0.275 6.98 4.950 5 4.825 6.050 153.67 130 5.905 149.99 5.891 149.63 97 9.869 4.640
17.00 0.304 7.72 4.892 5 4.767 6.050 153.67 118 5.953 151.21 5.891 149.63 88 9.869 4.640
20.00 0.361 9.17 4.778 5 4.653 6.050 153.67 101 6.045 153.54 5.891 149.63 75 9.869 4.640
23.00 0.415 10.54 4.670 5 4.545 6.050 153.67 88 6.128 155.65 5.891 149.63 66 9.869 4.640
26.80 0.500 12.70 4.500 5 4.375 6.050 153.67 74 6.254 158.85 5.891 149.63 55 9.869 4.640
6
Outside Nominal Wall Nominal Drift Coupling Outside Diameter Coupling Make up
Diameter Weight Thickness Inside TPI Diameter API Regular Coupling 100% Efficiency Special Clearance Coupling Length Loss
Diameter (API) Outside Tensile Outside Outside Tensile Length
D t d Diameter Efficiency Diameter Diameter Efficiency LL
in. mm lb/ft in. mm in. in. in. mm % in. mm in. mm % in. in.
6 5/8 168.28 20.00 0.288 7.32 6.049 5 5.924 7.390 187.71 167 7.048 179.02 7.000 177.80 91 10.269 4.840
24.00 0.352 8.94 5.921 5 5.796 7.390 187.71 138 7.155 181.74 7.000 177.80 75 10.269 4.840
28.00 0.417 10.59 5.791 5 5.666 7.390 187.71 118 7.261 184.43 7.000 177.80 64 10.269 4.840
32.00 0.475 12.06 5.675 5 5.550 7.390 187.71 104 7.352 186.74 7.000 177.80 56 10.269 4.840
7 177.80 20.00 0.272 6.91 6.456 5 6.331 7.656 194.46 155 7.384 187.55 7.380 187.45 99 10.669 5.040
23.00 0.317 8.05 6.366 5 6.241 7.656 194.46 134 7.462 189.53 7.380 187.45 85 10.669 5.040
26.00 0.362 9.19 6.276 5 6.151 7.656 194.46 118 7.538 191.47 7.380 187.45 75 10.669 5.040
29.00 0.408 10.36 6.184 5 6.059 7.656 194.46 106 7.614 193.40 7.380 187.45 67 10.669 5.040
32.00 0.453 11.51 6.094 5 5.969 7.656 194.46 96 7.686 195.22 7.380 187.45 61 10.669 5.040
35.00 0.498 12.65 6.004 5 5.879 7.656 194.46 88 7.756 197.00 7.380 187.45 56 10.669 5.040
38.00 0.540 13.72 5.920 5 5.795 7.656 194.46 81 7.821 198.65 7.380 187.45 52 10.669 5.040
7 5/8 193.68 26.40 0.328 8.33 6.969 5 6.844 8.500 215.90 169 8.098 205.69 8.000 203.20 83 11.069 5.240
29.70 0.375 9.52 6.875 5 6.750 8.500 215.90 149 8.178 207.72 8.000 203.20 73 11.069 5.240
33.70 0.430 10.92 6.765 5 6.640 8.500 215.90 131 8.270 210.06 8.000 203.20 64 11.069 5.240
39.00 0.500 12.70 6.625 5 6.500 8.500 215.90 114 8.382 212.90 8.000 203.20 56 11.069 5.240
42.80 0.562 14.27 6.501 5 6.376 8.500 215.90 102 8.479 215.37 8.000 203.20 50 11.069 5.240
45.30 0.595 15.11 6.435 5 6.310 8.500 215.90 97 8.529 216.64 8.000 203.20 47 11.069 5.240
8 5/8 219.08 32.00 0.352 8.94 7.921 5 7.796 9.625 244.48 177 9.145 232.28 9.120 231.65 96 11.069 5.240
36.00 0.400 10.16 7.825 5 7.700 9.625 244.48 157 9.227 234.37 9.120 231.65 85 11.069 5.240
40.00 0.450 11.43 7.725 5 7.600 9.625 244.48 140 9.311 236.50 9.120 231.65 76 11.069 5.240
44.00 0.500 12.70 7.625 5 7.500 9.625 244.48 127 9.393 238.58 9.120 231.65 69 11.069 5.240
49.00 0.557 14.15 7.511 5 7.386 9.625 244.48 115 9.484 240.89 9.120 231.65 62 11.069 5.240
9 5/8 244.48 36.00 0.352 8.94 8.921 5 8.765 10.625 269.88 175 10.149 257.78 10.100 256.54 92 11.069 5.240
40.00 0.395 10.03 8.835 5 8.679 10.625 269.88 157 10.244 260.20 10.100 256.54 82 11.069 5.240
43.50 0.435 11.05 8.755 5 8.599 10.625 269.88 143 10.293 261.44 10.100 256.54 75 11.069 5.240
47.00 0.472 11.99 8.681 5 8.525 10.625 269.88 132 10.355 263.02 10.100 256.54 69 11.069 5.240
53.50 0.545 13.84 8.535 5 8.379 10.625 269.88 116 10.476 266.09 10.100 256.54 61 11.069 5.240
58.40 0.595 15.11 8.435 5 8.279 10.625 269.88 106 10.556 268.12 10.100 256.54 56 11.069 5.240
LL
TM
The Make up loss for FOX is shown in the size table.
7
Cat.No.E1E-013-05
http://www.jfe-steel.co.jp/en/
TOKYO HEAD OFFICE Hibiya Kokusai Building, 2-3 Uchisaiwaicho 2-chome, Chiyodaku, Tokyo 100-0011, Japan
Phone : (81)3-3597-3111 Fax : (81)3-3597-4860
Notice
While every effort has been made to ensure the accuracy of the information contained within this publication, the use of the information is at
the reader’s risk and no warranty is implied or expressed by JFE Steel Corporation with respect to the use of information contained herein.
The information in this publication is subject to change or modification without notice. Please contact the JFE Steel office for the latest information.